Question about 1999 Isuzu Amigo

2 Answers

Fuel gage does not work - 1999 Isuzu Amigo

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 68 Answers

This is a common problem in this type of vehicle and this is a result of a defective fuel sending unit

Posted on Mar 17, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

You probably have a bad float switch which is located inside the fuel tank. There is also the possibility that the gauge itself is bad, but more likely the float switch. Replacing them usually means dropping the fuel tank, but some cars have an access panel under the carpet and beneath the back seat. Not sure about your particular vehicle. Hope this helped.

Posted on Mar 17, 2011

  • kevco11
    kevco11 Jan 17, 2013

    i took my back seat out and cut access door myself to replace my fuel pump

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Chevy s15 Rpm and Gas Gauge is not working


I didn't see an s15 in that model year, in my database?
If the speedometer works but the tach doesn't, I think something is wrong with instrument cluster?
GM has had a problem with fuel gage sending units. The sending units are not hard wired to instrument cluster, they send signal to pcm, the pcm sends serial data to instrument cluster, telling the cluster the gage settings.
It may be possible to use different size resistors in place of the fuel level sending unit, to see if fuel gage reacts properly to different resistors, if the gage reacts properly, then I think the problem is the fuel gage sending unit.

Nov 02, 2016 | Chevrolet Cars & Trucks

1 Answer

Gas gage not working


Maybe a problem with instrument cluster?
Usually the circuit works off resistance to ground. The sending unit in gas tank provides resistance to ground. The signal wire for fuel gage is a purple wire, if goes to fuel pump wiring connector. With key on, use digital multimeter, check for voltage. If no voltage, either problem with wiring circuit or instrument cluster. W/0 looking at instrument cluster, I don't know if you can replace gage itself w/o replacing instrument cluster?

If voltage on the purple wire, ground it, while a helper watches the gage, if the gage starts reacting, then check the grounds for fuel pump wiring connector, if that checks ok, suspect the fuel pump sending unit has a problem.

Apr 23, 2016 | 1991 Chevrolet Lumina

1 Answer

My fuel gage in my chev s10 doesn't work I've done


did you set the fuel in right .sound like the sending unit is not right place

Dec 02, 2012 | Cars & Trucks

1 Answer

Fuel gage fuse


The fuel gage shares the same fuse as all the gages, so if the fuel gage is inop and all other gages are working then you have another problem. The most common cause is that the sending unit for the fuel gage inside the fuel tank is defective, that is true 99% of the time in my 35 years of repair work.

Jan 20, 2012 | Ford F-250 Cars & Trucks

1 Answer

Gas gage is not working rite


The most common cause of a erratic or incorrect fuel gage reading is a defective fuel gage sending unit inside the fuel tank. To replace the sending unit requires that the fuel tank be removed from the car and then the fuel pump module which contains the sender be replaced.

Jan 04, 2011 | 1997 Oldsmobile Aurora

1 Answer

Fuel guage not working


Testing the fuel gage requires accessing the harness from the fuel pump and grounding the yellow / white wire with 160 ohms resistance this should cause the gage to read full, and with the circuit open you should have the gage reading empty. If the gage works in this order then the likely failure is the sending unit in the tank , and will require replacement.

May 30, 2010 | 1999 Ford Expedition

1 Answer

Fuel gage not workin after going


You could have losen the wireharness from the tank to the frame, check along the frame towards the fuel tank and check for any loose connection. The only other thing is the sending unit in the tank it self may have gone bad. Good luck

Apr 08, 2009 | 1996 Chevrolet K1500

1 Answer

The digital fuel and temperature gauge is not working


u will need to replace the fuel gauge sending unit.

Mar 27, 2009 | 1989 Ford Probe

3 Answers

2001 Pontiac Montana Temperature Gage and Fuel Gage malfunction


sending unit or float in gas tank, check if any broken wires or well plugged in and then check the float for the gas.

Nov 02, 2008 | 2001 Pontiac Montana

Not finding what you are looking for?
1999 Isuzu Amigo Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...