Question about 2000 Chevrolet S-10

Open Question

All of my dash lights on my 2000. s10 are on. They will not come on untill I pull the gear shifter to put my truck in gear but when I do that all of my lights come on like the security light and ABS light. The abs light started flashing the other day it would randomly cut on and off with no pattern and I was wondering what could possibly be wrong with my truck. The truck has a 2.2 motor in it

Posted by on

  • southards201 Mar 20, 2011

    What was the problem with it I can not seem to find it on that sight but I will look harder when I'm on a computer not on a phone

  • pfallone001
    pfallone001 Nov 24, 2017

    poor battery ground.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: abs light on

I'm a Ford service adviser. There are many reasons for the
abs warning indicator to come on. The usual cause is from a
faulty speed sensor. Either a wheel speed sensor or the
differential speed sensor. I don't think the light is related to your vandalism. You might want to take the truck to an auto parts store and have them read the codes for you. Most auto parts stores will do this for free.
Good Luck

Posted on Jun 23, 2008

Ad
tripletauto
  • 1450 Answers

SOURCE: shows ABS fault on dash and ABS light stays on

Check your abs connectors they might have pulled a wire loose

Posted on Nov 11, 2008

  • 106 Answers

SOURCE: 97 Lumina dash warning lights stay on

does you car vibrate a little if so mabe you abs system is out which would cause the check engine light to stay on with the abs light. Once you fix the side that vibrates which is probbly the wheel bearings and the abs is connected and that will get the lights to go off or it has a bad connection test wires for abs with light idicator?

Posted on Mar 19, 2009

Monster80
  • 460 Answers

SOURCE: 2001 chevy s10 blazer abs light stays .

The abs is a add on for the brakes that when the tires come into a skid or slid they wont lock up..Your brakes will still work great with the abs disabled but your brakes will lock up if you push on the brakes hard enough to stop.Mainly abs works in slippery conditions not letting the tires lock up and keep the car rolling instead of making it slide..But no effect of the brakes will happen..Just make sure your fluid is full and there are no leaks and if you want to get them check you can stop by your local Auto Zone and they will scan your car for free and tell you what sensor is bad..I hope this was helpful to you...Have a great night

Posted on Apr 03, 2009

  • 1 Answer

SOURCE: Toyota Tundra 2005. ABS, Airbag, Tire & cruise dash lights flash

how do you turn the maintenance light off after making oil change?

Posted on Sep 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nissan pulsar 2000 automatic.gear lever sticks in park.


Hi Jenn. All vehicles have a shifter interlocker system , it's a safety feature that won't allow the shifter to be put into gear ,unless the drivers foot is pressing the brake pedal . Do your brake lights work ? This is just a general idea on how it works , because all car makes don't do it the same ! On the brake pedal under the dash is a switch an when you press the brake pedal it allows power to go to a solenoid unlocking the shifter ,allowing the driver to put the vehicle into gear ! You would need to find a wiring diagram so you could check voltage at the brake switch , into an out of the brake switch with the pedal pushed ! Then find the lock out solenoid an see if power is being applied to it ! Hope this helps

Sep 10, 2015 | Nissan Cars & Trucks

1 Answer

2000 buick regal key gets stuck and car will not turn over


The stuck key could be the following. There is a cable that runs from the gear shifter to the ignition switch. Jiggle the shifter in park and simultaneously gently move the key to off and pull the key out. The key in and not fully turned to off will drain the battery.

Jan 07, 2014 | 2000 Buick Regal

1 Answer

Gear shift light


there is a bulb underneath the shifter panel-pull up the plastic around the shifter and look for it underneath the shifter- it should be a 168-or 194 bulb- cheers Denny

Nov 22, 2013 | 2003 Chrysler Sebring

1 Answer

2000 sable- can't shift out of park. shifter glides and needle on dash moves there's no gears shifting. is the transmission blown?


Not likely a blown transmission. More of a shifter cable issue. There is an adjustment nut on the ****** end. It could be loose or missing. If the nut is fine you have a broken cable.

May 19, 2012 | 2000 Mercury Sable

1 Answer

I have a 2000 s10 blazxer with no 4x4.not 4x4 lights on the dah nothing.changed the tccm,4 button switch and encoder motor.any help appreciated.


Automatic tranny
For this car, it can be really pricy or you can take my advise. I would recommend that you remove the 1 or 2 screws located on the reverse side of the shifter!. once you do this, you basically deactivate a safety device that is preventing you from shifting your car into gear! The safety device basically will not allow you to shift until you press firmly on the breaks and the key is installed. TAKE IT FROM AN EXPERT who has been there done that hundreds of times. you can find the screws on the reverse side of the shifter, just feel for them with your fingers.

Jan 29, 2011 | 1994 Chevrolet S-10 Blazer

2 Answers

1986 s10 4x4,transfer case,loose manual shifter


theres locking pins that hold it in gear that kind of resemble a door latches it`s my guess that there springs are no good and they just are staying open allowing it to slip back out of gear.

Jan 01, 2010 | 1987 Chevrolet S-10 Pickup

2 Answers

No light on transmission gear


the light comes from a small bulb, pull the shifter out and replace the bulb

Apr 03, 2009 | 2000 Lincoln Continental

1 Answer

'95 Chevy S10 stuck in first gear


I think the shift linkage is all internal so if you can get the shifter pulled out of the top of the trans through the floor, you can probably realign the linkage to a neutral position and reinstall shifter.
There may be something worn or broken that caused it or just one of those fluke happenings.

Mar 20, 2009 | 1995 Chevrolet S-10 CA Edition

2 Answers

Can't get my 2000 ford taurus out of park


The gear selector is locked until the system detects the brake pedal is being pressed, the brake circuit then sends a signal to the shifter release solenoid to pull a pin back and let you shift out of park, this is a safety feature required by federal law, U need to have someone see if the brake lights go on when you press the pedal, if they don't check the switch at the top of the brake pedal, if the brake lights work then the little solenoid is defective.

Oct 15, 2008 | 2000 Ford Taurus

2 Answers

2000 crown victoria -brake lites failed


You have a bad switch at the brake pedal. Or a loose wire. Try light pulling on the wires on the switch at the brake pedal under the dash. They should be tight and secure. If tight and secure the switch could be bad.

Jul 03, 2008 | 2000 Ford Crown Victoria

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...