Question about 2008 Ford Fusion

1 Answer

2007 Ford Fusion, electronic clicking sound under driver seat when slowing dow, stopping, stopped or upon resuming acceleration.

Posted by on

  • asdukes Jul 03, 2012

    Nothing under the seat & it is electronic not something clanging. It still happens.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,095 Answers

Only the airbag connections under the seat ,but their is also a pressure sensor as well i think last time i cleaned the contacts on the airbag wires mtheir is a pyrotechnic device as well to pull the seat belt in if a collision ,so have a good look to try to see whats causing the noise ,sure you havent a coca cola can rolling around??

Posted on Mar 17, 2011

Testimonial: "Will have to check it out, first before I can do a justifiable rating."

  • asdukes Mar 17, 2011

    Was told could mean alternator was bad but it was just replaced

  • Colin Stickland
    Colin Stickland Mar 18, 2011

    no i dont think alternator would cause it ,last fusion i done only had the airbag gizmos under the seat ,but i have had funny noises from a rubbish under seat and a classic many years ago of a marble under the back seat .Yes and a woman who hung her handbag on the choke lever ---- and that is true honest

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the headrest from 2007 ford fusion?


a standard ford head rest

look for a pusher button or pin on the base plastic where the two metal guides go into the top of the seat

might need to to push in both at the same time
and lift the head rest

if it stops at the top you keep pulling upwards

Mar 14, 2015 | 2007 Ford Fusion

1 Answer

How to remove the front driverseat of a land rover dico 3


before you go to this extreme check under the back of the seat ( rear floor and check for bottles or cans or anything that can roll or move when you accelerate or decellerate

Mar 01, 2014 | 2007 Lincoln MKX AWD

1 Answer

My car is a 2007 Ford fusion. Yesterday, out of nowhere, my car alarm just went off. I kept pressing the unlock and lock button to make it stop (it usually stops when i press these) but it would not stop...


The alarm is running your battery down. Have you tried unhooking the ground wire from the battery for a few minutes to see if it will allow the electrical system to reset itself? Sometimes cars need a re-boot just like a computer.

Apr 18, 2013 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

Why did my 2005 Ford fusion ac/heat fan just stopped blowing. It was working great and then I made a quick stop and when I got back into the car and started it the AC fan stopped blowing?


you probably blew a fuse that fan has its own fuse believe it or not. look under driver side dash or left side of dash for the fuze box the fuses should be labled

Jul 08, 2012 | 2005 Ford Fusion

1 Answer

2006 FORD FUSION 2.3l i get a rapping sound in my engine it starting when i accelerated from a light and got worse with driving sounds like something is rattling around under the valve cover


Does it sound like Metal on metal noise? or like a knocking noise?

If it increases with RPM that means you may have a serious issue.

If your comfortable i'd take off one coil pack at a time and see if the knocking stops. If it stops that cylinder might have Rod Knock..

it could be valve lash, or a valve train tick as well. There are several different things sadly.

Feb 26, 2011 | 2006 Ford Fusion

1 Answer

Air stops blowing through the vents when accelerating


u have a loss of vacuum to the ac mode control switch, this switch applies vacuum to diff vacuum motors to move air to diff outlets, dash, floor, defrost etc. either the vacuum line or vacuum resivior at the engine is leaking or the mode control is leaking vacuum.

Aug 14, 2009 | 2003 Lincoln Navigator

1 Answer

2007 Ford Fusion shaking when stopped


Sounds like a missfire, check spark plugs and HT leads from coil, they suffer from water damage from the windscreen washer jets. If water found you will need new coil, plugs Ht leads and revised washer jets from ford.

Good luck Davelee

Mar 15, 2009 | 2006 Ford Fusion

1 Answer

Seatbelt on 2007 ford fusion


It is a safety latch that is doing it's job.

If you wreck the car the belt stops preventing you from hitting the dash or going through the windshield.

Try this test to make sure they work:
Get in the car and start it,

Put your foot on the brake, and put the seatbelt on -

Now yank on the shoulder part real hard if it doesn't stop immediatly you should get it replaced.

Jun 23, 2008 | 2007 Ford Fusion I4 SEL Sedan

Not finding what you are looking for?
Cars & Trucks Logo

461 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...