Question about Hyundai Santa Fe
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hyundai santa fe 2001
p0715 > A/T input speed sensor circuit 1. Many malfunctions in the electrical system are caused by poor harness and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. 2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. P1729>This DTC code is related to the EMC and is set If EMS harness has an open battery source 1. Ignition OFF 2. M54 Electric Magnet Valve Clutch connector : Disconnect. 3. Measure resistance between 1 & 2. A. Specification : Approx. 1.8 ~ 2.2 Ω The above value is only for reference. The data from vehicle may differ from it according as various vehicle condition. This inspection is for checking open or short of EMC coil.
Posted on Jun 16, 2008
If it's yellow that is the check engine light, a fault has occurred in the emission control system, have a trouble code test run by Kragen auto our another parts store like them, it is free post the code back here.
Posted on Dec 09, 2008
SOURCE: 2001 Kia Optima
P1529 and P0720 does not seem to be understood.
P0715 means Input/Turbine Speed Sensor Circuit Malfunction.
P0118 means Engine Coolant Temperature Circuit High Input.
For more understanding visit:- http://www.troublecodes.net/Kia/
Posted on Aug 08, 2009
it is inside the timing cover in most cases with hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing belt make sure the timing marks are lined up so when you reassemble it is lined up
Posted on Aug 29, 2009
Testimonial: "Thank you for the advices Ill get cracking on it"
Tips for a great answer:
May 08, 2014 | 2005 Hyundai Trajet 2.0
Oct 05, 2013 | 2001 Hyundai Elantra
Aug 30, 2009 | 2001 Hyundai Sonata
Jul 21, 2009 | 2001 Hyundai XG300
Apr 10, 2009 | Hyundai Motor 2002 Elantra
Dec 09, 2008 | Hyundai Tiburon Cars & Trucks
Sep 18, 2008 | Hyundai XG300 Cars & Trucks
Jul 01, 2008 | 2003 Hyundai Tucson
Jun 15, 2008 | 2001 Hyundai Santa Fe
230 people viewed this question
Usually answered in minutes!