Question about GMC Yukon

1 Answer

How do you replace bulb? from the rear or do you remove front plastic?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi


You need to remove the plastic above the lens first, then remove taillight. Use a phillips screwdriver to remove two screws, then use a flat screwdriver to remove plastic rivets for plastic shroud between lens and door. With that shroud off you can see the next nut to remove. Altogether there is about 8 fasteners each side to change the bulbs.


Since you did not mention which bulb you want to replace on which model of GMC car I am giving you a general idea of replacing bulbs on GMC car,hope it will be helpful:-


http://www.ehow.com/how_4520714_replace-rear-signal-lights-gmc.html


http://www.ehow.com/how_6418491_change-yukon-rear-brake-light.html


http://autorepair.about.com/od/fixityourself/ss/truck-tail-bulb.htm


Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com


Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I dissasembly headlamp from body


to replace headlight bulbs turn steering so you can open flap in the wheel arch.open flap liner to access of the rear headlight unit.to remove inner bulb in headlight housing remove the air intake duct at front of the air cleaner housing right hand side unclip the wiring harness connector unclip the the left wiring harness connector front of fuse and relay.to remove the dipped beam remove the plastic cover from rear of head light unit.through wheel flap opening. rotate bulbholder anti clockwise to remove bayonet fitting remove headlight bulb. WARNING WEAR CLEAN GLOVES WHEN HANDLING HEADLIGHT HALOGEN BULBS OILS FROM HANDS WILL CAUSE HALOGEN BULB TO OVERHEAT AND BLOW OUT.

Dec 01, 2012 | 2007 Renault Scenic 1.6

1 Answer

How do you replace drive indecator light


1. Lift the little carpet in the console rear to the automatic gear shift. Pry with a small flat screwdriver will do the job.2. Remove the three Philips head screws.3. Remove one Philips head screws on each side of the rear console, they are located at the bottom front of the rear console panel. You may have to move the driver and passenger seat back to see the screws.4. Grab the back of the rear console and gently wiggle, pull backward and lift upward. Pull the hand brake so it is easier to remove the loosened rear console panel. 5. Use a flat head screwdriver to pry the rectangular 'cushion' around the automatic gear shift. Gently pry at various spot and the rectangular 'cushion' will come off easily.6. Now you are just one more plastic cover away from the burned bulb. The plastic cover that has those 'P'ark, 'R'everse, 'D'rive letters is held in place by four snap on latches. Use a small flat head screwdriver and gently push the black latches inward in a downward motion, once the screwdriver head gets inside the grey latch holder it will free the black latch. Work on each of the four latches in turn.7. Wiggle the plastic cover until it is completely loosened from the four latches. Gently lift the plastic cover up. The automatic gear shift will stop the plastic from being lifted out completely. You still have enough room to work with. You will see the little burned bulb directly below those 'P'ark, 'R'everse, 'D'rive letters. Gently pull the bulb out. I got my replacement bulb at Canadian Tire, Motomaster instrument replacement bulb 194LL (clear, long lasting, 2 bulbs for $2.99Cdn). It is a push-on bulb.8. Test the bulb by starting your car and dash lights.9. Snap back the plastic 'P'ark, 'D'rive cover. Put back the rear console panel and finally the rectangular 'cushion' around the automatic gear shift.

Dec 17, 2011 | 2006 Toyota Corolla

1 Answer

How to replace bulb in front bumper turn signal housing 1995 jag xj6


hello,
  • Identify the blown bulb. Note that if a headlight bulb has blown, the dip beam is on the outside and the high beam is on the inside. Turn off the ignition switch and light switches.

  • Open the hood and replace any blown headlight bulbs. Press the plastic spring clips and remove the bulb holder from the assembly. Pull the bulb out of the bulb holder and replace it with a new bulb. It only fits one way. Be sure not to touch the bulb's glass. Replace any parking lights at the same time, they are in the headlamp unit too.

  • Remove the front turn signal light unit in the bumper to change the turn signal bulb. Push gently on the inside edge and insert a blade between the bumper and the lens at the outside edge. Compress the spring and remove the lens. Fit a new lamp by inserting it into the plug. The side marker light is changed using a similar process.

  • Open the trunk to replace the rear fog light, stop light, tail light, reversing light and turn signal light. Remove the rear light cover and turn the bulb holder fastener 90 degrees counter clockwise. Remove the expired bulb, fit a new one and replace the parts, turning the bulb holder clockwise.

  • Thanks..

    May 21, 2011 | 1995 Jaguar XJ6

    1 Answer

    O replace passenger side rear turn signal bulb on 2004 Cadillac


    open trunk, remove the plastic panel around the latch plate, remove the plastic mounting bolts that hold the grey trunk liners in place, there are two 10mm nuts that hold in the light remove nuts pull out light twist the bulb retainer out and replace bulb.

    Jul 12, 2010 | 2004 Cadillac CTS

    1 Answer

    Replacing headlamp bulbs


    Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

    Jul 09, 2010 | 2006 Chevrolet HHR

    1 Answer

    Bulb must be out, how to replace


    Lift the hood and remove the plastic clips from the front shroud. Remove the shroud and unbolt the two half inch bolts holding the headlight. Pull teh headlight forward to expise the rear of the lens. Turn the plug retainer counterclockwise until you can wiggle the plug containing the bulb out. Replace with a 9007 single bulb (the old one just pulls out).
    Reverse the steps.

    Jan 23, 2010 | 2001 Pontiac Sunfire

    2 Answers

    Replace front head light bulb on drivers side 2005 beetle


    The headlight is actually a bulb inserted into a light module. You can remove the plastic light module by releasing the tension spring on the rear of the headliht housing inside your hood. Once the tension spring is released pull the plastic light module from the fender socket by gently pulling on the edges of the headlight. The module should pull out with some minor difficulty. Remove the bad bulb from the rear of the plastic bubble, and replace it with a new halogen bulb. Replace the module into the fender socket and reclip the tension spring(s). Not all that difficult of a job once you know how its accomplished.

    Aug 19, 2009 | 2005 Volkswagen New Beetle

    1 Answer

    How do I replace a taillight lens on a 1991 Geo Storm?


    Rear Turn Signal, Brake and Parking Lights


    STORM COUPE
    1. Disconnect the negative battery cable.
    2. Lift the luggage compartment floor carpet toward the front of the vehicle and remove the spare tire cover panel.
    3. Remove the ten plastic retaining clips from the rear end trim panel.
    4. Disconnect the luggage compartment lamp electrical connector.
    5. Remove the luggage compartment trim panel and the rear end trim panel.
    6. Disconnect the rear combination lamp assembly electrical connector. Fig. 1: Rear Turn Signal, Brake and Parking Lights — Storm
    84256028.gif
    1. Remove the seven nuts and the rear combination lamp assembly from the vehicle.
    2. Disconnect the rear combination lamp electrical connector.
    3. Remove the four bulb sockets from the rear combination lamp assembly and remove the four bulbs from the sockets. To install:
    4. Install the four bulbs to the sockets and install the four bulb sockets to the rear combination lamp assembly.
    5. Connect the rear combination lamp electrical connector.
    6. Install the rear combination lamp assembly to the vehicle and the seven nuts.
    7. Connect the rear combination lamp assembly electrical connector.
    8. Install the rear end trim panel and the luggage compartment trim panel.
    9. Connect the luggage compartment lamp electrical connector.
    10. Install the ten plastic retaining clips to the rear end trim panel.
    11. Install the spare tire cover panel and the luggage compartment floor carpet.
    12. Connect the negative battery cable.

    Mar 21, 2009 | 1991 Geo Storm

    1 Answer

    99 olds culass headlight bulb replacement


    Look at the top of the headlight assembly. There is a plastic panel on top of the assembly that is held in place by two plastic pins. Remove those pins by lifting the center of the pin and then pull out the pin. Remove the panel. Then you will find two small plastic levers that will lift about 1/2 inch. They do not come out but they will release two studs that secure the assembly. After the assembly is released, slide it forward to access the bulbs you need to replace. Installation is the reverse of these procedures.

    Feb 25, 2009 | 1999 Oldsmobile Cutlass

    2 Answers

    Removing rear light assembly on honda odyssey 2006


    Yes, there is a "spear point" plastic clip that is still engaged into a socket type holder in the front outboard portion of the tail lamp assembly. Pry gently with a tape wrapped screwdriver at the front outboard corner of the assembly and the clip will release. You will then be able to see how the clip works and will be able to align and engage it first when replacing the tail lamp assembly.

    -T

    Jan 24, 2009 | 2007 Honda Odyssey

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    26 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...