Question about Jeep Cherokee

1 Answer

Seems as if the cable is sticking causing the transmition not to shift until high rpm

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

What model Jeep? This is normally caused by the filter not flowing fluid correctly. A fluid and FILTER change will solve the problem 99% of the time. Do not do the "Trans Flush" at the quick lube. They do not change the filter.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes high idle in 2003 taurus. Rpm's stay high until I brake for a minute and then it drops suuddenly.


Could be a vac leak or a problem with the idle air control valve. I would check the valve to see if it is sticking open. Could be a problem with the throttle cable too.

May 20, 2014 | 2003 Ford Taurus

1 Answer

Shifting funny


If this is a standard/stick shift, your clutch may be going out.

Jul 10, 2008 | 2005 Ford Escape

1 Answer

Shifting high rpm


Remove the battery cable & see if it will relearn the shift points

I doubt a 1992 even has that capability,you may have a failed trans

Mar 28, 2014 | 1992 Chevrolet K1500

3 Answers

High idle unless driving in gear, but if clutch is pushed in or car is in neutral rpm goes up to 2900


run fault codes to check for accelerator position sensor problems . Check for vacuum leaks. If cable accelerator then check that the return spring on the end of the cable is attached and not missing.

Feb 14, 2014 | 2004 Subaru Outback

1 Answer

Shifting high rpm


Follow cable/linkage from throttle body to transmission for kickdown and make sure it is well lubricated and moving freely at all points, especially at transmission . Patially seized or stuck will cause it to hang up like you are accelerating and trying to pass.

Jan 22, 2014 | Dodge Cars & Trucks

1 Answer

Will not shift in my 2000 chevy lumina


a jeep lumina?
wrong forum but that is ok, seems to be common here.
what wont shift.
A/T or M/T auto or stick? tranny????
what does will not , mean?
I cant move the shift lever
i cant shift, to 2nd
IT (autobox ) will not shift ever, or slips or flares. or?
if its and A/T autotranny, tell me what it does right and wrong
here is an example.
i start engine.
i shift to drive car dont move, in any gear
i see RPM race high with right foot over 3000 RPM.
tranny failure. (slips)
or RPM stays near 1500, and engine sounds loaded,
and i find the parking brake stuck on, or the brakes are full of ice
and stuck fast.

Jan 21, 2014 | 2003 Jeep Grand Cherokee

1 Answer

1988 chev trans takes high rpm to shift from 1st to 2nd and some times it wont down shift when you slow down and hit the gas again


Check the adjustment of the transmission T.V. cable. Sometimes they also stick. Try driving it at 30. Shift to Neutral, stab the gas pedal to the floor quickly a couple of times. Then shift back to drive. Then see if it shift normal.

Jul 13, 2010 | 1988 Chevrolet C1500

2 Answers

1988 Chevrolet K1500, 4x4, Auto transmition will not shift into 3rd, or higher


try adjusting kickdown cable to manfactures spec this may work

May 29, 2009 | 1988 Chevrolet K1500

1 Answer

1993 suburban C1500 2wd trans trouble


parking pawl binding or damaged check parking linkages.causing parking problems. shift problem is governor and shift valves sticking.

Mar 23, 2009 | 1993 Chevrolet Suburban

1 Answer

1999 dodge ram delayed and erratic shifting


ummm i would say you need to adjust your trans shift cable, check your fluid level, and the problem i had with my dodge was similar to yours... it was my 3rd-4th actuator spring, it had broke and couldnt hold the pressure to keep it in gear

Oct 07, 2008 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...