Question about Mazda 626

1 Answer

Trying to replace the fuel pump but it isn't in the fuel tank. Where else could it be and how do I get to it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,654 Answers

Well you didn't even tell us what year the car is? how are we supposed to know? Most likely it is on the engine block on older cars and it may even have an inline electric pump. Just follow the fuel line from the carb to the pump!

Posted on Mar 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced fuel pump now fuel gauge isn't working


sending units get knocked out of calibration when they change the pump.(carelessly).if you can.. check the top of the tank, to see if they plugged it in firmly. if not, raise heck till the change it. (doubt they will). other than the wires, not much you can do, without dropping the tank.

Jan 11, 2013 | 2001 Hyundai Tiburon

2 Answers

2005 V-6 mustang , fuel pump will not run


it's designed to only run until it builds a specific pressure. once the pressure is reached it turns off. if the car isn't running and you suspect the fuel pump drop the tank take the fuel pump out. use two pieces of wire and hook it straight to the battery and see if it continues to run. if it run continuously thats is not your problem as it will continue to run trying to build up pressure but it won't be able to considering it's not in an air tight system

Jul 16, 2012 | Ford Mustang Cars & Trucks

1 Answer

How do u replace a fuel pump on a 92 olds 88 royale


Fuel pump is in tank. Must drop gas tank for access to pump. Has a lock ring on top. Before removing lock ring, clean top of tank so dirt isn't going into tank.

Feb 29, 2012 | Oldsmobile Cars & Trucks

1 Answer

Fuel pump leaking oil


Sounds as though the pump isn't seated properly. I know the one bolt is hard to get to, however, if the pump isn't seated properly, it won't bring fuel up to the pump. May possibly need another gasket as well. But, from what the symptoms sound like, it's not getting fuel from the tank to the pump and most likely from the pump not seated properly.

Jan 03, 2012 | 1987 Suzuki Samurai

1 Answer

How to take out a fuel pump out a 97 expedition


I'm not 100% for sure but I believe that the fuel pump is inside the gas tank. I replaced one for a friends explorer and I had to drop the gas tank. if you have a chiltons repair manual and a little bit of know how it should walk you threw the process. replacing the pump isn't to difficult but getting to it will take a bit

Dec 28, 2011 | 1997 Ford Expedition

1 Answer

Fuel pump not turning on. Won't fire but will turn over. swapped out relay, still not fire.


Try banging on the fuel tank, and then quickly try to start it, if it starts your fuel pump is almost dead and will need replaced soon.
If it doesn't start, test for power at the wiring connector on top of the fuel tank. This test requires 2 people, because the fuel pump is only powered for a few seconds when the engine isn't running. If you have power, then the problem is in the fuel pump (completely failed or bad wiring connection on the pump/inside the sending unit)

Aug 24, 2011 | GMC Jimmy Cars & Trucks

1 Answer

Where is the rollover switch on the fuel line, and where is it located in a 1990 Plymouth Voyager. Van hasn't been driven in about 6 years. Fuel pump was working ,now it isn't. It is a EFI...


The switch is a check valve. no electrical to it. It is located on top of the tank. Try hitting the bottom of the tank. if the fuel pump starts working then replace the pump.

Jun 16, 2011 | 1990 Plymouth Grand Voyager

1 Answer

91 oldsmobile custom cruiser will not start, did test and we get spark. The fuel pump continuously run when key is turned. Have replaced fuel pump relay. Next suggestion was to replace ecm fuse - but...


The bigger question here is whether or not the fuel pump is delivering fuel when it runs. Fuel pumps work on pressure. Once the pressure builds up in the fuel lines it will shut off until the pressure drops, then it turns on again. The fact that your pump doesn't turn off suggests that either it's not pumping any fuel out of the tank or it's not building any pressure. First thing to do is make sure there is fuel in the tank. It's possible your fuel guage has stopped working and is giving a false reading.Start looking for gas leaking under the car. A leak that let's the pump run continuously should leave a very visible wet spot. Look at the top of the tank as best you can too. Loosen the fuel line at the throttle body and see if you have pressure there. Maybe it's pouring fuel into the engine and creating a flooding condition. The fact that it runs continuously would suggest the problem isn't the filter. If the filter was plugged it would build pressure. If you can't find anything here I think you are going to have to drop the tank and start looking in there to see why it isn't picking up fuel, possibly replacing the pump. Hope this helps.

Jun 11, 2011 | 1991 Oldsmobile Custom Cruiser

2 Answers

Mercury cougar 2002 run out of gas. then died. put gas in and now wont start. what could it be?


the fuel rail has to be bled out. when you run a fuel injected car out of gas sometimes the fuel rail needs to have the air bled out before it will operate properly.

Jun 11, 2011 | 2002 Mercury Cougar

1 Answer

My aux tank valve will not change from front to back, fuses are good , switch works good . engine stalls when I move dash switch from rear tank to front. but if I flip back real quick, it gets fuel and is...


Check your fuel pump in the front tank. The fact that it begins to stall - tells me that the valve is actually working - the front fuel pump just isn't pump fuel.

May 26, 2011 | Ford F-250 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...