Question about 2002 Toyota Tundra

1 Answer

02 sensors My 2002 Tundra has 60.000 miles and I have replaced 1 O2 censor, and right after I did that, another went out. Will Toyota help since it has fairly low miles? Is is possible to replace them yourself? It cost 324.00 to replace the first one!!!! I dont have that kind of money and inspection is in Sept. Thanks for any info.... Amber in NC

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, and went to tundrasollutions.com and found that Toyota had extended the warranty on these two o2 sensors. call the toll free number in your owners manual, give them your vin(vehicle identification number), and tell them your problem. they will call your local Toyota dealer and give them all the info.The dealer will fix it for free as long as you haven't exceeded your mileage for the warranty which i believe is 70,000mi.

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is Oxygen (02) sensor on 2003 toyota tundra


O2 sensor are in the exhaust pipe. this truck should have 2 if its a 4 cylinder and 4 if its a 6 or 8 cylinder.

Sep 06, 2014 | 2003 Toyota Tundra

1 Answer

Loosing coolant


Where,I got a 04 Tundra,had a water pump leak,over flow was low,got under and removed skid plate and seen pink antifreeze,wiped up good,then took a drive and looked and followed it to the water pump,also it's recommended to have timing bedlt replaced too,keep using Toyota pink antifreeze.The Dealer is high cause they fixed mine,I didn't have time,working alot of overtime at work,but These water pumps go out soon on ours,I only had 60,000 miles on mine,2 oxygen sensors have went out,dealer replaced for free,these have that problem too.So if your coolant over flow is low,you have a leak.I bought my Tundra new in 2004 and have let dealer do all oil changes cause of the free scan they do.

May 04, 2013 | Toyota Tundra Cars & Trucks

1 Answer

P0155 02 censor bank2 censor1..were is it located?


What motor? Bank refers to the side of the engine. Bank 1 is always the same side as the numb one cylinder. Bank 2 is the other side. Sensor refers to before or after the catalytic converter. Sensor 1 is before the cat. Sensor 2 is after the cat. If you have any questions let me know. Thank you for using fixya.com!

Oct 22, 2011 | 2000 Toyota Tundra

2 Answers

02 Toyota tundra won't idle. I put a new battery on and cleaned air filter


sounds like a bad idle control sensor.as long as you're driving it and giving it gas it runs somewhat ok right? it won't idle by itself,or it idles up and down by itself and then dies?thats a sign of a bad idle control sensor,some times they straighten up after the engine warms up and run fine.but eventually go completely bad and won't idle at all. hope this helps and thank you for choosing fixya.com

Jan 09, 2011 | 2002 Toyota Tundra

1 Answer

Engine light stays on after changing 02 sensor on my 2000 toyota tundra code read o2 sensor


did u change the right o2 sensor there is 2 sensors on bank1 and 2 on bank2.....upstream and down stream.....i had the same prob i changed the o2 senser to the other side to check and make sure it was the o2 senser....it took 4 o2 sensors before i got 1 that finally worked nd yes i was buying them brand new.....so change sides with it nd see if the code changes sides....and did u reset it with the code machine when u put the new 1 in?

Mar 28, 2010 | 2000 Toyota Tundra

1 Answer

The check engine light is on and I brought the 2002 tundra to the dealer and they said it was the o2 sensor on the 2nd block. I would like to know the location of where it is so I could do it myself.


if its o2 bank 2 its the sensor after the catalytic converter bank 1 is in front of catalytic converter towards engine0-- the o2 sensors are screwed into the exhaust pipe follow the pipe from engine back under vehicle and will see both

Jan 20, 2010 | 2002 Toyota Tundra

2 Answers

01 toyota tundra stalls at idle....engine code p0420


Could be a problem with the Catalytic Converter or oxygen sensor (H02S bank 2 )

Sep 09, 2009 | 2001 Toyota Tundra

1 Answer

Open circuit in o2 sensor from the ck eng codes 60000 miles on the trk never had a problem could this be cat w/bad function code


An open circuit code for an O2 sensor would not be a catalytic converter. An open cicuit code would normally indicate a faulty O2 sensor. 60,000 miles would be about right for this sensor to go bad, especially with all the additives in todays fuel. Hope this helps

Jul 18, 2009 | 2002 Chevrolet S-10

1 Answer

Error P0155


That code will not affect the drivability of the vehicle. The heater does just that: it heats up the oxygen sensor to operating temperature. You can change it yourself, raise the vehicle up, the sensor is the one on the passenger side, right after the exhaust manifold.

Thanks for choosing FixYa for advice!

Mar 05, 2009 | 2002 Toyota Tundra

2 Answers

Check engine light on code is P0155-02


I had to replace both o2 sensors on my 2002 Tundra after about 50K. Toyota recalled this problem afterwards and refunded my money. My solution to you is to not worry about which one is bad and go ahead and replace both, because I had one bad and before I could replace it the other went bad also. PS: You'll have to purchase a special socket to remove them and unless you pruchase the Toyota product ( I used O'Reilly parts), you have to cut and splice the wires with a waterproof splicing kit included with the sensors. Just follow the instructions, not a hard job.

Nov 13, 2008 | 2000 Toyota Tundra

Not finding what you are looking for?
2002 Toyota Tundra Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...