Question about 1984 Toyota Land Cruiser

1 Answer

Have a 84 land cruiser ps pump torn apart for oring replacement cant get springs back in place on vane

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 2,527 Answers

Ijust the same thing on mine You can do it just make sure everything goes back together as far as what should be up and what should be down as far as the pump parts go or you'll get it back on the vehicle and it won't pump . So everything has to go back together is same order . As far as the pump vanes and the springs go get as many on at first as you can and use stator to hold them in and put the rest of them in one at a time it will take a little patiance to do but they will all fit back in you will have to slide the rotor out half way to do this . Then slide it back into the stator after you get all of the vanes and springs in place . These pumps are vary reliable and hardly ever have a problem with the vane parts in the pump its the o rings and mainly where they seal to the revisior that leaks . Mine it 20 years old i expected to see ware but there was none just bad seals with the o rings

Posted on Mar 17, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can I buy delivery valves and springs for a Toyota Land Cruiser with a denso pump 22100-1C170 separately? Or can I only buy a reconditioned/new pump

buy a reconditioned pump , check the springs for leaks To prevent the pump from overworking and re-damaging

Jul 10, 2017 | Toyota Cars & Trucks

1 Answer

Water pump on toyota land cruiser leaking

It is any special color? rust or so? Some of the water pumps notify in this manner that is time to replace it before the problem became worse!

Nov 21, 2013 | 1989 Toyota Land Cruiser

1 Answer

I pulled the plastic cover off were the wires go into the back of the key and a small ball berring and a spring fell out . I cant figure out were they go.

this will be the de-dent spring and ball that holds the ignition in the correct position for off-accessories-run . For them to fall out there must be a bit broken off the back of the switch or the switch is loose.

Nov 17, 2013 | 1993 Toyota Land Cruiser

1 Answer

How to pull apart a toyota land cruiser fuel pump

Dont think they do come apart ,their all pressed together with a big press

Feb 11, 2012 | 1997 Toyota Land Cruiser

1 Answer

I Have toyota land cruiser modle 1994 Engine is not started in the moring.

sounds like the fuel pump or regulator issue. fuel is draining back to the tank. try turning the ignition on and off 3 times without cranking the engine, then try to start it. If that works, replace the pump assembly, filter and regulator. airtex or delphi makes a great replacement alternative to an actual toyota part, and is much less money. Happy Motoring.

Mar 05, 2011 | 1994 Toyota Land Cruiser

1 Answer

My land cruiser is Diessel 2004 motor 1HD toyota wen I torne on the aircond the aidle speed go to 950 rpm is too hi how I can turnit doun

adjust the dash pot shaft mounted on the fuel injection pump a couple of turns its the unit tha has a vaccume line from a switch

Aug 02, 2009 | 2000 Toyota Land Cruiser

1 Answer

Toyota Land Cruiser fuel tank warning light on

Hi There. Have the exact same problem on my 95mod petrol with the sub fuel tank not emptying. think it may be the relay but cant find it. The earlier models have the relay in the rear wheel well, but ours are set up differently. had the whole car to pieces but still cant find it. Was wondering if you had any luck with yours and could enlighten me. Thanks

May 11, 2009 | 1995 Toyota Land Cruiser

1 Answer


If it is a small amount of fluid that is leaking I would try some of the Lucas brand products. after a couple of applications on my 78 chevy's power steering pump the leak stopped.

Apr 27, 2009 | 1983 Toyota Land Cruiser

1 Answer

2003 Land Cruiser V6 4.5L Coolant Temperature Sensor!!!

please send me an engine picture, V6 4.5 L ? , thanks

Jul 05, 2017 | 2003 Toyota Land Cruiser

1 Answer

Looking for proceadure replacing power steering pump for '96 toyota landcruiser.

syphon PS fluid, pinch hoses, remove belt, remove mounting bolts, remove pump.
rinse, lather, repeat.

Mar 26, 2009 | 1996 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides