Question about Nissan Murano

1 Answer

Need to replace the entire mirror with the electric power connection.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 12,744 Answers

Didnt specify what model vehicle but 90 percent of nissans just remove door panel held in place by clips carefully pry panel up also check for screws by door handle unbolt- unscrew the mirror unplug wire connection replace everything done

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to the interior electrical switches


check connection with other relays around the relay u replaced and replace that relay again may be bad

Nov 23, 2013 | 2006 Honda Accord

1 Answer

Replace drivers side mirror 2001 chevy tahoe,mirror only


To just replace the mirror glass there are a few different styles, but they all pull off. I suggest you wear gloves and glasses. Get a grip behing the glass and pull out. You should see a round circular bracket in the center. The new mirror just snaps into the bracket. Center new mirror and push evenly in the center of glass until it snaps into place. Dont push in by holding the edges, you'll break it. If you don't see the circle or it comes off with the glass it was too damaged for just glass. Power or manual mirros differ inside, but the mirror replacement is the same. If you mean the entire mirror only, remove door panel. Lower window, remove electrical connector if power, remove 3 bolts attaching mirror to door. Remove.

Jan 27, 2011 | 2001 Chevrolet Tahoe

1 Answer

Replacement for passager mirror for 2005 pontiac grand prix


Hello,

To replace the mirror of your car all you have to do is follow the process below,

  1. Remove the plastic shards of mirror lens from the mirror shell,
  2. If any of the shards are still stuck to the mirror, pull them off the motor and discard them,
  3. Sweep any small shards out of the shell with a vacuum cleaner,
  4. Place the new mirror lens into the mirror shell, the lens has a small metal bracket on the back of it that fits over the motor.
  5. The tight fit of the mirror in the shell forces the bracket to line up with the motor.
  6. Push the mirror bracket onto the motor by pushing on the center of the mirror lens with your hand. You will feel the bracket snap into place.
But if you want to remove the entire mirror, then you will have to follow the steps below for the DIY process:

  1. To replace the outside mirror, the door panel needs be taken off to get to the retaining nuts and the wiring.
  2. You will need a few common tools, Phillips screwdriver, flat head screwdriver, and a 10mm socket and ratchet. No special tools are required.
  3. Remove the Phillips screws located in the arm rest.
  4. Remove the screw in the door handle.
  5. Remove any screws that may be located around the circumference of the door panel.
  6. Use the common screwdriver and insert it in between the door panel and the door and pry out the trim fasteners around the circumference of the door panel.
  7. These trim fasteners are plastic plugs with serrated edges on the shank and pushed into holes on the door. Once these are removed, lift the bottom of the door panel straight up to unlatch the panel from the top horizontal ledge.
  8. If the vehicle happens to be a Ford, it uses downward facing hooks on the door panel that hook into the door. Simply lift straight up to remove the hooks.
  9. Bring the door panel just far enough to remove the door handle rods if necessary.
  10. Disconnect the power window electrical connectors. Remove the lower door panel's marker light connector.
  11. Disconnect the power outside-mirror electrical connector and then using the 10mm socket, remove the three retaining nuts on the backside of the outside mirror.
  12. Withdraw the mirror and studs from the door.
  13. Install the electrical connector for the new mirror through the opening in the door and line up the studs on the mirror with the holes in the door and push it through.
  14. Install the nuts on the backside. Connect the electrical connector.
  15. Hold the door panel close to the door and connect all the electrical connectors.
  16. Tip the bottom of the door panel outward slightly to attach the top curved surface to the horizontal channel.
  17. Lower the bottom of the door panel and line up the trim fasteners with the holes in the door. Once lined up, push them into the holes to hook the door panel.
  18. Replace all the screws in reverse order of removal.
Take care.

Dec 18, 2010 | 2005 Pontiac Grand Prix

2 Answers

Deeppockets2000@hotmail.com how to remove the driver door mirror on a 2005 pontiac vive.


HAVE TO TAKE DOOR PANEL OFF THE MIRROR IS BOLTED ON AFTER PANEL'S OFF YOU GET TO THEM.

Dec 18, 2010 | Pontiac Vibe Cars & Trucks

1 Answer

Replacing passenger side mirror on a 2002 Forester.


it not too hard to do,you may be able to replace by removing the cover on the inside of door, then remove the nuts holding the mirror on, then disconnect electrical connector, you may need to pry panel back a little to get to the electrical plug, the panel pops out on that side, no need to completely remove, to remove all the way then you would need to remove the screws, but not needed, just pop loose in the area near mirror to get to plug then install new one.

May 13, 2010 | 2002 Subaru Forester

1 Answer

Replace driver side mirror


The entire assembly has to be replaced, can not just replace the mirror.Remove the plastic trim on the inside of the door on the top part of the panel, either comes off with one screw or bolt or simply pull and it has pins in it.Then remove your bolts that hold the mirror in from the inside.If you have a power mirror remove the electrical pigtail, then simply reinstall.Hope I could help..HAPPY HOLIDAYS!!!

Dec 22, 2009 | 2006 Toyota 4Runner

1 Answer

Remove/replacing side view mirror on a jeep grand cherokee


    Remove the Old Mirror
  1. Step 1 Disconnect the negative battery cable before you take off the grand Cherokee front door trim panel. Remove all screws and clips.
  2. Step 2 Detachthe window trim cover screw, and control lever screw beforedisconnecting the entire mirror trim cover. Remove the rubber coverinside the mirror cover, and disconnect the electrical wire.
  3. Step 3 Remove three nuts from the power mirror using a Torx® star-shaped screwdriver.
  4. Step 4 Pull out the outside rear view mirror. Guide the power wire through the hole in the door.
  5. Install the New Mirror
  6. Step 1 Replace the old mirror. Put the new power mirror in place. Push the new wiring through the hole in the door.
  7. Step 2 Install and tighten the three retaining screws you took off when removing the old mirror.
  8. Step 3 Connect the power mirror wiring to the connection located on the door panel. Replace the rubber cover and interior mirror cover.
  9. Step 4 Put the front door trim panel back in place by securing all clips and tightening all screws.
  10. Step 5 Connect the Subaru Outback's battery cable to restore the power.

i will recommend i site where you will get all the information you need to remove and replace your side mirror
http://www.wjjeeps.com/mirrors.htm

Sep 10, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Remove passenger side mirror. Ineed to replace a broken passenger side mirror. Do I need to remove the entire door panel to access the scriews holding the mirror and to access to electrical connection?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 11, 2009 | 2007 Toyota 4Runner

1 Answer

Replace passenger side mirror 1995 Saturn


use a small flad bladed screwdriver to remove panel on inside of door behind mirror. then remove the 3 10mm nuts holding on the mirror. if it is a power mirror you will need to unplug the electrical connection.

Mar 31, 2009 | 1994 Ford Crown Victoria

1 Answer

Sideview mirror assembly removal


  1. Remove the front door trim panel (23942) ; refer to Section 501-05 .
    • Peel back the watershield.
  1. Remove the rear view mirror mounting hole cover (17K709).
5d2b410.gif
  1. Disconnect the power mirror electrical connector.
0ea0125.gif
  1. Remove the outside rear view mirror (17682).
    1. Remove the screws.
    1. Remove the outside rear view mirror.
89dafc2.gif
please rate as fixya if this works for you.

Mar 03, 2009 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...