Question about 2002 Audi A4
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: electrical fault Audi A4 2002
PRISE OUT THE TRIM PANEL AT THE BASE OF THE ARMREST WITH A FLAT-BLADED TOOL UNDO 2 SCREWS(DRIVERS DOOR) SINGLE SCREW ACCESSIBLE THOUGH THE ARMREST ON PASSENGER SIDE ,NOW GO TO THE BASE OF THE DOOR TRIM UNDO THE SCREW IN THE CENTRE,ONTO THE TOP TRIM NOW ABOVE THE RELEASE HANDLE,STARTING AT THE FRONT EDGE(DOOR HINGE SIDE) CAREFULLY PULL THE TRIM PANEL AWAY FROM THE DOOR TO RELEASE THE CLIPS,THEN SLIDE IT TO THE FRONT TO UNHOOK THE REAR EDGE OF THE TRIM PANEL,UNDO THE 4 SCREWS YOU CAN SEE,UNHOOK CABLE FROM REAR OF INTERIOR DOOR HANDLE,DISCONNECT WIRING PLUGS SPEAKER ,WINDOW MOTOR CONTROL UNIT AND THERE YOU HAVE IT ..EASY... IF YOU START NOW YOU WILL HAVE IT FINISHED IN 2 DAYS...ONLY JOKING....SHOULD TAKE 1 HOUR..HOPE THIS WILL BE OF SOME HELP TO YOU...LET ME KNOW HOW YOU GOT ON
Posted on Feb 10, 2009
is it a 1.8 turbo or 2.8 V6 or 2.7 biturbo V6 ? on most models what you will be looking for is a 3 letter code like ATQ or APW and is normally on a sticker on the timing belt cover, it is also stamped into the engine on a ledge up high. if no luck there check the owners manual, around the 3rd page there will be a sticker that was put in the book during predelivery inspection this sticker is about 3 inches by 3 inches and filled with id codes for almost everything. If the pdi wasn't done right another copy of the same sticker will be under or next to the spare tire in the spare tire well.
Posted on Mar 24, 2009
At least on the driver side, there really is no reason to remove the entire headlight assembly. I was able to swap out the bulb fairly easily but simply removing the dust cap, popping the connector off the bulb, and then undo the clip holding the bulb in place. The just reverse order to install the new bulb. Took about 3 minutes.
Posted on Dec 13, 2009
SOURCE: bleeding a4 (b6)cooling system?
bleeder screw on metal water pipe above inlet manifold. loosen bleeder screw, fill coolant at coolant resivoir untill all air pushed out bleeder.
Posted on May 12, 2010
Tips for a great answer:
Apr 15, 2017 | Audi Cars & Trucks
May 13, 2016 | 2003 Audi A6
Oct 27, 2013 | Cars & Trucks
Sep 28, 2012 | Cars & Trucks
Sep 06, 2009 | Audi A4 Cars & Trucks
Jan 21, 2009 | 1995 Audi 90
Aug 13, 2008 | 1999 Land Rover Discovery
302 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: