Question about 1997 Chrysler Sebring

2 Answers

When you put the keys in to crank it,everythlng . the lights inside,the radio,but it will not turn all the way to crank it,all you hear is a click.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 662 Answers

Sounds like a faulty ignition switch.
Be prepared with T10 Torx, flatheads and phillips screwdrivers to replace this part.

Posted on Mar 16, 2011

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 299 Answers

Make sure its in park the wheel is not locked and if that don't work key is worn or ignition needs replaced.

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can hear it click but it wont open with the key either.


Auto Repair : Power Door Lock Troubleshooting - YouTube

? 1:52
https://www.youtube.com/watch?v=wsqbE_ztTYw
May 12, 2009 - Uploaded by ehowauto
Hi i have a locked driver side door that will not open.when i lift the locking ... I press the power lock, and hear a sound but all four doors remain locked or unlocked ... Hey sorry for the botherbut I need help.my key button don't unlock or lock.the button inside the car doesn't work either to unlock or lock.so I'm ...

Fixing A Car That Does Nothing When You Turn The Key ...

? 3:37
https://www.youtube.com/watch?v=TSE0fOrujW0
Aug 16, 2012 - Uploaded by Scotty Kilmer
2005 Mustang wont start or crank from the key.. wont say nothing good battery ..... all I hear is clicking noise my radio and lights and everything comes on but it will not do nothing what couldthis be have I blown something?

Jan 06, 2016 | Cars & Trucks

1 Answer

When put fob, no cluster lights, no crank, no start!


That key reset it's code like every 60 secs... do you have other keys around it that are also for that car... if so they might both be changing codes at the same time.

Sep 03, 2015 | Cars & Trucks

2 Answers

Engine will not turnover


If you are hearing clicks when you turn the key and if you know where the starter is, get under there and tap it with a hammer. Sounds archaic but when they start to go bad they stick. When you turn the key, the starter acts like the old hand crank you see in movies to spin the engine. When you release the key the starter believes it did its job and goes dormant. Anyway, if you hear clicks when you turn the key and if it starts after hitting it that is likely your problem.

Feb 09, 2015 | 2001 Volvo V70 XC

2 Answers

Troubleshooting starter system


Dirty battery cables or faulty starter. Do the lights stay on bright while starting?

Mar 29, 2014 | 2002 Ford Explorer Sport Trac

1 Answer

2010 f150 has power but won't crank, have no dash lights but radio works


Could be a stuck starter motor, get a hammer and tap lovingly on the starter housing.. Then give it a try. Failing that the automatic transmission safety lock might be engaged. Move the shifter into gear then back into park and try starting.

Jan 13, 2014 | Cars & Trucks

1 Answer

I have a 2000 Plymouth neon and have been having some issues. When you put the key in and then it to the ON position the lights, radio, and everything comes on inside the car. But the fuel pump is not...


Dead batteries have enough power to turn on the lights you mentioned but under load (cranking ) there will be nothing. have a load test done on the battery to check for failing cell

Nov 17, 2013 | Cars & Trucks

2 Answers

My 2002 chrysler sebring 2.4L will not start turn key and hear no clicking noise nothing at all, lights and horn work , when i jumped the battery it did nothing no clicking. what should i try next?


Check if you have power at the starter from the ignition key
Try give direct power to the starter, if still not starts, you have a bad starter

Mar 20, 2013 | 2002 Chrysler Sebring

1 Answer

My 2006 buick lacrosse wont start radio and lights work but its not saying nothing when i try to crank it


Hello! Do you hear a click when the key is turned?...If no click is heard either the ignition key, the Crank relay, the starter, or the battery are suspect...Having lights and radio does not mean the battery is capable of running a starter motor......Put a meter on the battery...should read 12.5 volts...Turn key...Does voltage drop to 8 or 9 volts? Bad battery...If all is well with battery and connections to it...Check the starter fuse # 33 in the under hood fuse/relay box...If the fuse is good that click you should hear is from the Crank Relay in that box...If all of the above is OK connect your meter to the Purple wire that is connected to the starter motor...When the key is turned 12 volts must be on that wire...If there is the starter motor is defective...So, #1...Do you hear a click when key is turned...That would point at a bad starter or weak battery...#2...If you do not hear a click bad fuse #33, bad Crank Relay, bad ignition switch...#3...If fuse is good Bad Crank Relay or Ignition switch; Crank Relay is a low cost item ($10)...Replace Relay...Stop there and send a comment as to results...Guru...saailer

May 06, 2012 | 2006 Buick LaCrosse

2 Answers

I posted this a little bit ago but forgot to mention The car would not crank. I started the car and it just dies. Wlould not start or even crank. When I put the key in the egnition (and NOT turning the...


check to make sure yu have 12v at the battery, once you do turn the ignition to start, if nothing, check the fuse and relays that control ignition, if all is good then the click sound is coming from the starter, have the solenoid replace.

Jul 31, 2009 | Saturn SL Cars & Trucks

1 Answer

2004 KIA RIO-ENGINE WILL NOT CRANK


I would guess starter fuse first, then starter. When you turn key, if you don't hear a click, you should focus your attention on the fuse first and then the starter. If you hear a click, then most likely (80%) its the starter solenoid. try to start the car in neutral to rule out the neutral safety switch...good luck

Mar 08, 2009 | 2004 Kia Rio

Not finding what you are looking for?
1997 Chrysler Sebring Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...