Question about Toyota Corolla
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You only need to unscrew the vertical bolt located at the upper-outer side of the headlight, then you only have to pull the park light screen to the front of the vehicle -it could be a litlle hard-, the rest is only turning the bulb socket and take it out. To mount it the opposite procedure.
For additional information I would need your e-mail.
Posted on Nov 03, 2008
Most headlight retaining rings and trim bezels have very sharp
edges. Wear gloves. Never pry or push on a headlamp; it can shatter
Fig. Fig. 1: After removing the parking lamp screws, push on the grille clips to release the grille from the truck
Fig. Fig. 2: Remove the grille from the truck and set aside
Fig. Fig. 3: Remove the headlight bezel which is secured by screws
Fig. Fig. 4: Be careful when removing the headlight bezels, they can be sharp
A good kitchen or household magnet placed on the shank of the screwdriver will provide enough grip to hold the screw during removal.
Fig. Fig. 5: Pull the light out, then unplug the wiring harness from behind it
Posted on Apr 07, 2009
You can and it is not difficult, there are two bolts holding the top of the headlight to the body just over the radiator and a couple of screws holding the indicato in place, but you can access the back of the light fitting without doing so . It is a bit of a squeeze on the battery side.
Posted on Mar 08, 2010
If you have the HID bulbs, and there is moisture in the bottom of the assembly, the high voltage box at the bottom will not work. this requires removing the whole headlamp, removing the circuit board from the bottom and drying out. I have done mine twice before finally finding how water was getting in at the top seam of the lamp assembly. You will have to dis-assemble part of the wheel well and bumper cover to gain access to all the mounting bolts. Best of luck
Posted on May 02, 2010
Tips for a great answer:
Jan 26, 2016 | Toyota Cars & Trucks
Jan 02, 2014 | Toyota Cars & Trucks
Jan 02, 2014 | Cars & Trucks
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html
How to Replace a Headlight Assembly
How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
• Working of Headlight switch?
• Both headlight bulbs blow together?
• Car headlight bulbs don't last long?
These will help.
Nov 23, 2012 | 2010 Mercedes-Benz Sprinter
Aug 23, 2010 | 1994 Toyota Land Cruiser
Dec 05, 2009 | 1994 Toyota Camry
Oct 10, 2009 | 1994 Toyota Camry
Jan 25, 2009 | 1994 Toyota Tercel
Jun 27, 2008 | 1995 Toyota Corolla
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: