Question about 1996 Suzuki Sidekick

1 Answer

1996 Suzuki sidekick sport Clutch is making rattle sound when not engaged. When engaged I here a whine sound. I believe it is my throw-out bearing in the not engaged and my clutch when engaged. I change my slave-cylinder 1 year ago. It turned out to be a broken metal clip at the end of the clutch assembly under the dash.I bled the slave-cylinder yesterday twice. Is there any adjustment nut to tighten up the tension and reduce the pedal play?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 42,031 Answers

The problem is a failing throw out bearing

Posted on Jun 28, 2017

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: How do I remove spindle nut on a 1997 suzuki sidekick

on some models they are put on with a impact wrench i used to just put a impact wrench on it put it on remove and pull the trigger

Posted on Mar 27, 2009

boysor2933
  • 293 Answers

SOURCE: bled the clutch and slave cylinder on 97 suzuki

You may have a worn out clutch master cylinder. Check if there's fluid leak at the rear portion of the cylinder.

Posted on Jul 11, 2009

  • 278 Answers

SOURCE: I replaced the slave cylinder on my 91 G.M.C.

Yes, get a pro-bleeder. They are around $ 75-$90 but well worth it.

Posted on Oct 15, 2009

  • 3 Answers

SOURCE: how to bleed slave cylinder for 1997 suzuki

Hi if the sidekick is the same as the uk vitara then they don't have a slave cylinder just a clutch cable with a nut near the end to adjust it. If its like a grand vitara they have got a slave cylinder, just crack the bleed nipple off put one end of a small pipe on the end of the nipple and drop the other end in a bottle that is roughly half full of break and clutch fluid, ask someone to pump the clutch pedal until no more air bubbles are coming out then tighten the bleed nipple back up. make sure to keep a check on brake fluid levels while doing this.

Posted on May 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a grinding/ whining noise coming from the engine when i push in the clutch but it stopped after 5 minutes


check the throw out bearing in the clutch as it may be failing or have failed and the bearing bits are running on the pressure plate fingers.

Nov 10, 2013 | 1993 Suzuki Sidekick

2 Answers

Just bought a 2004 Elantra (93000 miles) with 5 speed tranny. With the hood up and my daughter behind the wheel I noticed a rattling sound (in neutral) coming from the clutch/transmission area when the...


I would be checking the throwout bearing. But, if the clutch isn't slipping, maybe leave it for now?

If you put it in 5th gear, let out the clutch with handbrake applied and it stalls--the clutch isn't slipping for sure.

Jan 31, 2011 | 2004 Hyundai Elantra

1 Answer

Whine sound when clutch is engaged; 1st mile


Then that would be the bearing, called a "throw-out" bearing as it is what pushes the pressure plate fingers in, & throws the clutch out so that you are not moving, or are changing gears.

These are usually pre-lubricated & sealed, after mileage the oil will rest in just one part of the bearing from being hot & used when you park it, until you use it.

More so in the cold weather, but once it spins a bit & warms up, the lubrication is again available, the noise goes away. It could do this for a long time, you'll notice it is always making the noise if the lubrication has completely seeped out of the bearing and if that happens, consider repairs before it becomes a constant howl.

good luck.

Feb 12, 2010 | 1985 Volkswagen GTI

1 Answer

What makes 1989 5 speed transmission whine in nuetral


Could be the steady bearing, but if the noise goes away when you step on the clutch it is the release bearing.

Jun 26, 2009 | 1994 Suzuki Sidekick

3 Answers

Clutch Whine on Toyota 4WD Pickup


Bad bearings. Perhaps a throw out bearing. The pressure on it varies depending on whether your pushing on the pedal or not, and how much. If the noise occured only when the truck is moving, then I would say it is the input bearing. Changed alot of those years ago.

Apr 06, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Eagle Talon 95 ESi manual 5 speed whining noise related to clutch


who ever told you its the throw out bearing was wright. its an enclosed bearing so it does not run in any oil. if it only makes noise when it cold or sets for a while its common and dose not warrent taking it to a shop. all there going to tell you is you need a new clutch$$$$witch you do not need.

Jan 19, 2009 | 1995 Eagle Talon

1 Answer

When I engage the clutch, sometimes it makes a whining sound.


If it is a throw-out bearing it will only make noise when pressure is applied to clutch pedal, there is also a pilot bearing that will squeel with clutch in if bad. when doing a clutch replacement all these parts should be replaced. 

Dec 01, 2008 | 1994 Honda Civic Del Sol

1 Answer

Whining


hi these boxes tended to be a bit noisey anyway but a simple test for the release bearing and first motion shaft is easy first make sure g/box oil level is ok
start engine ,take your foot off the clutch peddle compleatly you have a whine, put your foot on the peddleVERYlightlynoise should change ,if the noise is more of a rattle than a whine it is coming from the clutch release bearing if it a definate whine it is either the spigot bearing in the flywheel or the first motion shaft

Jul 11, 2008 | 1999 Toyota 4Runner

2 Answers

Clutch problems on my 1996 Suzuki Sidekick


Check under the dash where the clutch cable hooks up to the clutch pedal the splines shaft to the clutch pedal may be worn on the shaft. Weld or replace the cheap made parts

Jun 28, 2008 | 1996 Suzuki Sidekick

Not finding what you are looking for?
1996 Suzuki Sidekick Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...