Question about 1993 Ford Probe

1 Answer

Just bought a 2.0 16v probe,problems with the alarm,just keeps going off.Is it possible to disconnect the alarm and still have the immobiliser working?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Yes this alarm didn't come with the car from the manufacture like this its an aftermarket piece so just go through all the wiring and cut off the ones that are connected to the alarm box under the dash on the drivers side.Be careful though you don't want to cut off a wire that is needed but if you fallow each wire from the box to where it connects and then cut it you should be fine.

Posted on Oct 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I disconnect factory car alarm?


Mostly you can't as the alarm and immobiliser is integrated into the vehicle/engine management system.

It might be possible to disable it by getting at the software if you have the skill and a laptop with the right programmes but other than that disconnecting the sounder is all that is possible.
Some of the earlier Ford alarms were operated by a separate module that could be disconnected. Unfortunately these were hidden behind the dashboard and impossible to reach without first removing the dashboard.

Dec 03, 2015 | 2005 Ford Escape

1 Answer

How do I disconnect my car alarm?


Can you not lock it with a non alarm key? My polo locked that way, it had the transponder chip to disarm the immobiliser but would not arm the alarm

Jun 26, 2015 | 1996 Volkswagen Jetta

1 Answer

Alarm keeps going off how do we fix it


It's possible the key fob alarm button is stuck or failed in alarm mode? I don't know how far but move key fobs a long way from the car to see if that is a possibility with the car locked. Disconnecting the battery may have added to the problem. Security thinks the car is vulnerable. Any other components removed? Have the error codes read by an autoparts store.
That may reveal a problem.

Mar 21, 2015 | Cars & Trucks

1 Answer

Hi ive got a mg ztt how do you disconnect the alarm every time I locked the car today it keeps going off thanks


As the alarm is part of the immobiliser, you can't really turn it off.

Does it give a short beep when you lock it? If so, it's telling you a door/bonnet/tailgate is open. The dash display should tell you which.

It's often one of two bonnet switches which causes random alarms.

Feb 15, 2015 | MG Cars & Trucks

2 Answers

1995 2.4 Vauxhall Frontera, fitted alarm immobiliser keeps going off and will not reset. Engine does start eventually, but cuts out when alarm goes off again. Help


check ya battery thats normally the cause
good bat 12.4v bad bat anything below 11.8v

With the engine running
good 13.8-14.8v bad anything below 13.0v
if below 13.0v when running the alternator is broken

Hope i help
bakerboy11@hotmail.com
Automobile

May 17, 2010 | 1995 Isuzu Rodeo

1 Answer

MY FORD ESCORT 1.6 FINESSE 1997 IMOBILISER FAULT


disconnect the battery for 1 minute and try again - ---quick fix possible with that---
if that makes no difference then I would like to know exactly what model of alarm and immobiliser the car has - what is the maker + model no/serialno of the keyfob for the alarm, I can get the info I need off that.
also you can check the fuse in the alarm if you know where the alarm is situated, it will have a fuse either on an inline fulseholder on as a spade fuse stuck into its casing somewhere - replace the fuse if blown and try again to start the car ------------ tell me the model no of your alarm and immobiliser if no joy after battery/fuses and I can read up on them and see if I can fix your problem...

Jan 24, 2010 | 1997 Ford Escort

3 Answers

Want to disconnect immobiliser


leave well alone ,for now ??try another battery off of another car to see if this makes starter work because it most likely is another problem like altenator not charging and battery going flat thats giving you the grief .so try a battery from another car that is starting and see what happens,then get back to me

May 04, 2009 | Ford Escort Cars & Trucks

4 Answers

VW Polo Immobiliser P Reg


if not the key probably the reciever in the ignition switch for the immobilizer transponder

Jan 09, 2009 | 1997 Volkswagen Golf

1 Answer

94 honda civic lost remote


You can still retain the central locking system just buy a new aftermarket alarm system in which will cost cheaper.

Oct 01, 2008 | 1994 Honda Civic

Not finding what you are looking for?
1993 Ford Probe Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...