Question about Jeep Wrangler

1 Answer

Where are the drain and fill plugs on a 1992 wrangler 4.0 5 speed transmission

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 166 Answers

To add fluid you use funnel to put it down tube where trans dip stick is,,,,to drain take off trans pan, and this will not drain it all, maybe only 3-4 quarts will come out that way but you can change the trans filter with that pan off. This car is old enough to use a quart of Lucas trans slip treatment, cost 12.99 bottle in any parts store even Walmart, MAKE SURE YOU REPLACE WITH A QUART OF THIS , This is worth every penny it will keep that trans from ever going out from bad cluches. I have revived bad trannys with this stuf.Aloso add what ever trans oil it needs that 4.0 is a ford motor,right Go to wal mart and get a gallon of trans fluid blue bottle for 9.00 and the Lucas trans slip

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change gearbox oil


gear + BOX
so is the transfer case, box. or the 5 speed stick box or?
what?
we drain it then fill it, to the mark.
on all gear boxes.
if A/T we RTM read the operators guide. for how to do it right,
most dont and wreck the tranny. the #1 reason they removed the filler.
when posting car issues, stated what it is.
like this.
95 Trooper, 4wd M/T , i want to change the 5speed box lube.
what do i need to do that.?
ill spin the wheel of fate, and land on 5speed box.
and answer for TR5 and NV1500 boxes.

For all transmissions except for the Borg-Warner T5R, replace the transmission fluid at the first 15,000 miles (24,000 km) and then every 30,000 miles (48,000 km) thereafter. The Borg-Warner T5R transmission does not require periodic changing of the transmission fluid. (they lie)
  1. Raise the vehicle and support safely on jack-stands. Place a fluid catch pan under the transmission drain plug.
  2. Remove the fill plug from the side of the transmission, then remove the drain plug. Be cautious when removing the drain plug: the transmission fluid can be very hot. Allow the transmission fluid to drain into the pan.
  3. Install the drain plug and tighten to 20 ft. lbs. (27 Nm) for all models except the 1996 Hombre, which requires 27 ft. lbs. (37 Nm).
  4. Refer to the manual transmission fluid recommendations for the proper viscosity of engine oil, or type of transmission fluid to be used for the T5R and NV1500 transmissions. Fill the transmission by pouring the new fluid through the fill plug hole in the side of the transmission. Fill until the fluid starts to dribble out of the filler hole. Install the fill plug to 17 ft. lbs. (23 Nm), then lower the vehicle.
so next you ask, what fluid
sure.
Use engine oil for all of the manual transmissions, except for the Borg-Warner T5R and the NV1500 (1996 Hombre). Make sure to use engine oil of the correct viscosity for these transmissions, as follows:
  • Except 1992-96 Rodeo and Trooper, high temperature-SAE 40
  • Except 1992-96 Rodeo and Trooper, normal temperature-SAE 5W-30SF
  • 1992-96 Rodeo and Trooper, high temperature-SAE 15W-40, 20W-40 or 20W-50
  • 1992-96 Rodeo and Trooper, normal temperature-SAE 5W-30
he Borg-Warner (B-W) T5R is found on Rodeo models with the V6 engine. The 1991-93 B-W T5R uses DEXRON-II automatic transmission fluid, whereas the 1994-96 B-W transmission uses DEXRON- III automatic transmission fluid.

use the highest Dexron number, on the shelf, mark III is not made today.

Jul 03, 2014 | 1995 Isuzu Trooper

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

3 Answers

How much transmission fluid is in a 1999 jeep wrangler. want drain and flush trans completely and replace all fluid


Unless you have a flushing machine you will not be able to empty the torque converter.If you have a 3 speed auto you are looking at 9 quarts total.If you have a 4 speed transmission you are looking at 10 half total.Be sure you check the fluid in neutral and not park.

Feb 14, 2011 | 1999 Jeep Wrangler

1 Answer

How much transmission fluid is in a 1999 jeep wrangler


Automatic Transmission, 32RH Initial Fill..........4.1 quarts
Automatic Transmission, 30RH Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
3 speed 32RH..........8.6 quarts
3 speed 30RH..........7 quarts
Manual Transmission, AX-5 2WD..........7.4 pints
Manual Transmission, AX-15 2WD..........6.8 pints
Manual Transmission, AX-15 4WD..........6.8 pints

Feb 14, 2011 | 1999 Jeep Wrangler

2 Answers

What type of Dana is in the rear of the 98 4cyl wrangler


Engine, with filter..........6.1 quarts [1]
Cooling System, Initial Fill..........10.6 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, 30RH Initial Fill..........4.1 quarts
Automatic Transmission, 32RH Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
3 speed 30RH..........7 quarts
3 speed 32RH..........8.6 quarts
Manual Transmission, AX-5 2WD..........7.4 pints
Manual Transmission, AX-15 2WD..........6.8 pints
Manual Transmission, AX-15 4WD..........6.8 pints
Differential, 181 FBI Front..........2.6 pints [2]
Differential, With 194 RBI Rear..........3.6 pints
Differential, With 216 RBI Rear..........4.1 pints
Transfer Case, 242..........3 pints
Transfer Case, 247..........3.4 pints
Transfer Case, 249..........3.4 pints
Transfer Case, 231..........2.2 pints

Feb 14, 2011 | 1998 Jeep Wrangler

2 Answers

What kind of gear oil is required for my 1992 jeep wrangler 5 speed transmission/transfer case and how many quarts will it require


Transmission generally takes a bit less than two quarts, Use 75/90 gear lube in that (in very cold climates you can add a small amount of automatic trans fluid to keep it flowing on cold starts) Transfer case takes a bit over one quart and takes dextron mercon 3. When filling either, fluid is full when on a level surface it begins to come out of the fill hole while filling. When changing either, always make sure you can open the fill plug before draining so you know you can replace what you removed.

Sep 06, 2010 | 1992 Jeep Wrangler

1 Answer

How do I change the Manual Transmission fluid in my 1999 Jeep Wrangler 4 cyl ? Do I have a AX5 or a AX15 Transmission ? Please Advise. Is there a difference in changing the fluid ? Based on the pictures...


What you are looking at is likely a temp sensor. why not remove it with an open end wrench? If you can find the plug on the wire, then you can use a box wrench. Bottom line is the fluid will drain after it's out.
Before opening the drain, make sure you can open the fill port or you will be in trouble. I believe they use atf in those units. fill till it begins to run out of the fill port.

Jan 15, 2010 | 1999 Jeep Wrangler

1 Answer

What type of oil,oil filter and transmission fluid do i need? for a straight, 5 speed 93 jeep wrangler?


Jeep Wrangler/YJ 1987-1995 Repair Guide

Engine Oil

d0a6433.jpg

Fig. 1: Be sure to select the proper API quality classification and SAE viscosity grade of engine oil (10W-30)


Oil FIlter (K&N sample)
02b0418.jpg

HP-2004 work for 2.5L and 4.0L


Manual Transmission
The level of lubricant in the transmission should be maintained at the filler hole on all manual transmissions. This hole is on the right side. When you check the level in the transmission, make sure that the vehicle is level so that you get a true reading. When you remove the filler plug, lubricant should run out of the hole. Replace the plug quickly for a minimum loss of lubricant. If lubricant does not run out of the hole when the plug is removed, lubricant should be added until it does. Replace the plug as soon as the lubricant reaches the level of the hole.

4a317e4.jpg

Fig. 1: Manual transmission fill and drain hole plugs

DRAIN AND REFILL
Remove the drain plug which is at the bottom of the transmission. Allow all the lubricant to run out before replacing the plug. Replace the case with the correct viscosity oil. All manual transmissions use SAE 75W-90 API quality Grade GL-5 gear lubricant. Tighten the fill hole plug to 27 ft. lbs. (37 Nm).


I hope help you with this (rermember rated this help) Good luck.

Oct 12, 2009 | 1993 Jeep Wrangler

2 Answers

What kind of ATF goes in my 1992 cherokee?


Use ATF+4

Do not use Dexron or Mercon

Aug 08, 2009 | 1992 Jeep Cherokee Sport

4 Answers

Dont know were to put in new transmission oil on a 1992 Jeep Wrangler


the plug of the transmission of 1992 jeep is under the transmission case .

Apr 20, 2009 | 1992 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...