Question about 1996 Toyota Camry

2 Answers

Car won't start

My 1996 toyota Camary won't start and I have had no problems. I stopped at a video store to get a video, came out and couldn't get it started. It clicks like my blinker is on but will not turn over at all. I don't have a owners manual so I don't know if there is a safety feature preventing my car from starting or if there is something wrong. The battery is only a year old and my windows and radios work just fine. any ideas?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Like that other guy who posted about "overheated car"...your car could think that it is overheated, or it is...thus it won't start till it cools down after a long while...Temperature sending unit could be real old and corroded/rusted, thermostat could be going...so many problems that could be happening...

Posted on Aug 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,039 Answers

Its probably the starter try to start many time get somebody to turn the key and at the same time with a hammer hit the starter it should start dont press our luck and change it good luck pierre

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My '97 4 cylinder Toyota Camary automatic


Get a readout from the car's computer to see if there is a trouble code stored, which will give a good clue to the problem.

Camrys of this age often have a shift solenoid fail in the transmission, which will cause the symptoms you describe,

Sep 04, 2013 | 1997 Toyota Camry

1 Answer

Car stereo


Check the fuse..........

Jun 30, 2008 | 2003 Toyota Camry

1 Answer

Ok, I have changed the spark plug wires and plugs, I drive the car to town, which is 40 miles away, I go to the store and come out and try to start the car and it won't start, it has to set for one...


There are multiple possibilities causing such problem.Click the link below:---
The related links to your problem are provided as follows:---
Engine Starts fine but dies when gets Warm? http://whatisbyme.blogspot.in/2012/05/1991-toyota-trecel-engine-starts-fine.html

---------
Starts fine but dies in few seconds?


http://howtobyme.blogspot.in/2012/05/1994-toyota-pickup-starts-fine-but-dies.html

---------
Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

--------
No start After replacing Battery?


http://whatisbyme.blogspot.in/2012/05/2001-toyota-camry-no-start-after.html

----------
Car dead and will not Start? http://whatisbyme.blogspot.in/2012/05/car-dead-and-will-not-start.html

---------
1996 Jeep Grand Cherokee: Engine will not start? http://repairhelpcenter.blogspot.in/2012/06/1996-jeep-grand-cherokee-engine-will.html
-------- Mitsubishi will not start http://www.howtorepairguide.com/2012/11/mitsubishi-will-not-start.html

----------
These will help.
Thanks.

Nov 06, 2012 | Cars & Trucks

1 Answer

1996 toyota camary load rear end noise when apply brakes


The most common cause is that the brake pads are worn, causing the audible wear indicator to sound a squealing or scraping sound.

Aug 18, 2012 | 1996 Toyota Camry

1 Answer

I have Corolla Altis Auto Transmission 2007. Today when i was on way, i stopped at a store and after a while when i came back, i couldn't start my car in first ignition. I tried thrice and then car...


Open the gas cap and see if air comes out. When theres too much pressure in the tank the can will not get adaquate fuel. Theres supposed to be an evap valve to relieve the pressure but it might be malfunctioning.

May 15, 2011 | 2009 Toyota Yaris

1 Answer

Turn ignition key and nothing happens. No clicking. No sound at all.


Hello, My name is Anil. I have 1998 Toyota camary LE, 4cyl, When i turn ignition key no sound first, then when turn the key left and turn the key the right car starting. (this is happening only when car is hot, means not happening when i start car in the morning, happening after driving for some time and stop and star)
need help

Oct 11, 2010 | 2000 Lexus LX470

1 Answer

I changed the starter in my 1996 camary and now the car turns over but doesn't start. It ran fine before. I also changed the oil and plugs the day before the starter went out.I had forgotten to conect the...


Check to see if you are getting any spark to the plugs, if not then the wireing on the starter is wrong or you arched the wire while changeing the starter

Apr 11, 2010 | 1996 Toyota Camry

1 Answer

1991 TOYOTA CAMARY


If I were you, I would have the timing checked. If that is OK, then I would look very closely at the ignition coil, which is located under the distributor. If it is cracked or displays any burn marks, the coil is your issue. Both are common problems on the 91s, I would check the coil appearance first.

If you need further assistance, please feel free to respond back.
A FIxYa rating would be appreciated.

Feb 23, 2009 | 1991 Toyota Camry

Not finding what you are looking for?
1996 Toyota Camry Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...