Question about 2001 Hyundai Santa Fe

1 Answer

My 2001 hyundai sante fe gl accelerates slow and seems not to shift out of gear i tried to do the manual shifting but it doesnt seem to help

Posted by on

  • tyshaun Mar 16, 2011

    could it be a speed sensor or the pcm or ecu? but on another note when i drive it using the slap stick it wont go pass 45 and it takes so long to get up to that speed.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 166 Answers

You need to replace tranny, is your check engine light on? if so get codes read for free at Auto Zone parts store,,,Lots of miles on vehecle? Trans fluid should be changed at 40 thousand miles. Most folk dont do this and thats why trannys go out,,,and treating the trans bad like getting stuck in snow and driveing rough all cause bad trannys

Posted on Mar 16, 2011

  • tyshaun Mar 16, 2011

    No check engine light on and no codes show up

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Hyundai Sante Fe sucks fuel a lot. The speedometer isn't working,sometimes it permanently stays at gear 3 and doesn't alternate the gears. When accelerated,it doesn't respond sharply,it drags.


its your shift sensor in your transmission goin bad i would get the speedo fixed also wile u are at it if its at a high rpm wile driving and dont shift from 3rd its a sensor the dealer should be able to tell u what one by hooking it up to a computer

Dec 24, 2015 | Hyundai Cars & Trucks

1 Answer

2004 hyundai sant fe clutch makes grinding/whining noise when trying to shift gears. Just replaced the clutch 2 years ago. 107,000 miles


Does clutch grind or does it grind as you put into gear? If as you put into gear then , Transmission needs new sycros.

Dec 21, 2011 | 2004 Hyundai Santa Fe

1 Answer

My 2001 santa fe is having problems starting and when driving it is having problems shifting gears, the engine light comes on when it has this isue and then goes out. It seems to want to stall if the...


I had the same problem...for me it was the Engine Coolant Sensor (it sends information to the computer). The car accelerated without any reason, stalled, and sometimes did not want to start.

$20 at Advance Auto, 1/2 work and its fixed.

May 05, 2011 | 2001 Hyundai Santa Fe

1 Answer

We have a 2002 Sante fe Automatic AWD. We seem to lose power and cannot get up to highway speed. The ransmission down shifts the engine revs but we constantly lose power and the engine is at max rev. I...


It sound like a plugged up catalytic converter to me. If you have more question about this feel free to ask and I will answer then as soon as possible Thank You

Jan 27, 2011 | 2002 Hyundai Santa Fe

1 Answer

Need to change clutch in 2001 sante fe manual


no engine removal needed. you can pull the trans out enough to get to the clutch and replace

Feb 02, 2009 | 2001 Hyundai Santa Fe

2 Answers

Codes p0300 and p0720


The P0300 is down to a cylinder misfire, usually it will have a number like 0302 where the 2 would mean the misfire is in number 2 cylinder. When were the plugs and wires last changed? what milage is on the vehicle?
P0720 is the output shaft speed sensor seems to be more of a common problem on the older hyundai's, is the gear change smooth or erratic? has it ever locked itself into gear? if you clear these codes how quickly do they come back?

Nov 27, 2008 | 2005 Hyundai Santa Fe

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...