Question about 2002 BMW 3 Series

Open Question

HOW DO I RESET A 2737 ERROR CODE(TAMPERING ERROR) ?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My BMW 7series 7351 2004 wont start,it just cranks. started when I removed the battery and put it back. it gives me fault code 2737 anti tampering protection


That fault will cause a no start, it senses an unauthorized person is trying to start eh car. You need a shop to scan the system control module and see what is causing the fault.

Sep 23, 2016 | 2004 BMW 7 Series

4 Answers

Has my odometer been reset?


Yes it has been tampered with at some stage if it is malfunctioning in that manner.

Nov 04, 2015 | 2006 Mini Cooper

1 Answer

Hi, my house alarm ready light is not on since I opened the anti tamper box, when the box opened the alarm went off, I put in the entrance code number, the alarm went quiet, since then the ready light


Hi Terry,
Most alarm systems require you to reset the tamper alarm.
Most systems will reset the tamper simply by arming the system and then immediately disarming the system. However, you MUST make sure that the Tamper circuit you tripped is closed. If you removed the cover on the panel, make sure the tamper switch for the cover is in the correct position and that the cover is pressing the switch and closing its contacts. If you are trying to arm the panel with a cover off, the tamper circuit will not reset unless you defeat the tamper switch. Just make sure you remove the defeat when you replace the cover. You may also wish to try a google search on the type and model of panel you have so you can download a copy of the manual to check on the reset procedure. We also need to know what brand and model the panel is so we can help you further..

Nov 26, 2014 | Cars & Trucks

1 Answer

Fault code on my bmw 318i 2737 ews what does it mean


IT MEANS IT WILL COST ABOUT THAT MUCH TO REPAIR. BMW CODES ARE CROSS REFERENCED TO THE AMOUNT THE DEALER CHARGES TO FIX.

Oct 15, 2014 | 2002 BMW 3 Series

1 Answer

So i got my code checked and its P0405 says low circuit, brand egr valve brand new fuel regulator, i noticed some shrink wrap on the harness like it had been tampered with so im thinking its a wiring


follow this line of thought and check out the wiring at that point . It has been tampered with then most likely the wires will only be twisted together and possibly touching each other one of the causes for p0405 is wiring short to ground and the symptom is low input sensor A This points to a wire not properly connected and loose

Mar 20, 2014 | Chevrolet Cars & Trucks

1 Answer

2737 EWS ANTI TEMPERING PROTECTION FAULT CODE CAR DONT WANT START


hii dear a hawe problem on my car is not start become 2737 fault code thank you for help

Aug 10, 2013 | BMW X5 4.4i

1 Answer

Message centre error of a car with a lock through it, and the car wont start. What is wrong?


The car is in tamper mode. Leave the key in the ON position for 10-20 minutes to reset and retry. I would take it to the dealer to have the Passlock system inspected as soon as possible to make sure it does not happen again.
The car will go into tamper mode when it detects an unauthorized engine start attempt (such as a hot wire). It may also go into tamper mode if there is a Passlock malfunction inside the ignition cylinder.

Mar 04, 2011 | 2003 Chevrolet Monte Carlo

1 Answer

Turn key to start truck but nothing happens, security light is on. lights and everything works


does the starter motor turn? the security light is an indicator of tamper mode. in tamper mode you will not able to start the vehicle until you reset the Passlock system by leaving the key in the ON position for 10-20 minutes.
tamper mode is a result of an unauthorized engine start attempt (such as a "hotwire") or a malfunction in the ignition cylinder.

Mar 04, 2011 | 2001 Chevrolet Silverado 1500

1 Answer

Airgbag light is on. how do to reset it?


The short answer is no.
The air-bag warning light came on. Something has gone wrong and warrants a look to see what has happened. You would need to buy a special scan-tool to look at the live data, at stored codes, and after the repair is done, then reset the air-bag system.
Please don't tamper with the yellow connectors unless you know what to do. Static charge can set off an air-bag.

May 21, 2010 | 2001 Dodge Dakota

1 Answer

ERROR CODE


it means you have a bod O2 senser the front one as your car has two or three for a v6 but it will be the first one one in the pipe on the front side of a gm product or if your exhaust pipe comes off the back i.e. 2.3 it will be the one in the manifold itself ohh do not forget to check the plug first sometimes an over enthusiastic mechanic unplugs or tampers with these to get you to do more work check the plugs well and wires they are easily fixed

Jun 12, 2008 | 2003 Chevrolet Cavalier

Not finding what you are looking for?
2002 BMW 3 Series Logo

Related Topics:

1,171 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...