Question about 1999 Ford Taurus

1 Answer

My ford taurus SE 1999 have 3 codes P1504, P1507 and P1131

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

DTC Description Possible Causes Diagnostic Aides P1504 - Idle Air Control (IAC) Circuit Malfunction This DTC is set when the PCM detects an electrical load failure on the IAC output circuit.

  • IAC circuit open
  • VPWR to IAC solenoid open
  • IAC circuit short to PWR
  • IAC circuit short to GND
  • Damaged IAC valve
  • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms.
    • IAC valve stuck open
    • Vacuum leaks
    • Failed EVAP system
    • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms.
P1507 - Idle Air Control (IAC) Underspeed Error This DTC is set when the PCM detects engine idle speed that is less than the desired rpm.
  • IAC circuit open
  • IAC circuit short to PWR
  • VPWR to IAC solenoid open
  • Air inlet is plugged
  • Damaged IAC solenoid
  • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms
  • Disconnect IAC valve and look for no change in engine rpm as an indication of a stuck or damaged valve
P1131 - Lack of HO2S-11 Switch, Sensor Indicates Lean A HEGO sensor indicating lean at the end of a test is trying to correct for an over-rich condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.
  • Electrical:
    • Short to VPWR in harness or HO2S
    • Water in harness connector
    • Open/Shorted HO2S circuit
    • Corrosion or poor mating terminals and wiring
    • Damaged HO2S
    • Damaged PCM
  • Fuel System:
    • Excessive fuel pressure
    • Leaking/contaminated fuel injectors
    • Leaking fuel pressure regulator
    • Low fuel pressure or running out of fuel
    • Vapor recovery system
  • Induction System:
    • Air leaks after the MAF
    • Vacuum Leaks
    • PCV system
    • Improperly seated engine oil dipstick
  • EGR System:
    • Leaking gasket
    • Stuck EGR valve
    • Leaking diaphragm or EVR
  • Base Engine:
    • Oil overfill
    • Cam timing
    • Cylinder compression
    • Exhaust leaks before or near the HO2S(s)
A fuel control HO2S PID switching across 0.45 volt from 0.2 to 0.9 volt indicates a normal switching HO2S.

Posted on Mar 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mi Ford Taurus 3.0 2002 Esta acelerado y tiene codigo P1504.


That code = Intake Air Control Circuit Malfuction

Feb 04, 2015 | 2002 Ford Taurus

1 Answer

3 codes came on P1507,P1504and P0175 what do they and what do i do to fix it myself


P0175 indicates an overly rich condition on bank 1, and with the air delivery codes posted, this may resolve itself when the issue causing the other two codes is addressed.

P1504 and P1507 indicates problems with the Idle Air Controller valve. The Ford manual suggests to check the resistance across the two terminals on it. The IAC valve is under the plastic engine cover. I circled it in red on an image here for you.hurckesj.jpg

May 26, 2011 | 2000 Lincoln LS

1 Answer

What does the code p1131 mean and how can i fix it?


Its a bab oxygen sensor bank 1 #1sensor the closet one to the front of the vehicle its on the y pipe or header depending if its stright or a v motor

Nov 17, 2010 | 1999 Ford Taurus

3 Answers

What does computer code p1131 manufacturing control fuel air metering mean


Code p1131 manufacturer control fuel air metering, on a 2003 Ford Taurus. Where is part? Is there an easy way to see if it can be fixed without buying the expensive part?

Apr 27, 2009 | Ford Explorer Cars & Trucks

1 Answer

P0401. P0133, P1131- emmision test


Based on what the tech manuals say I would change the DPFE sensor for the EGR Valve, careful not to tear the special silicone rubber hoses that go to it from the exhaust, as a Ford dealer tech I saw these codes allot, and the DPFE sensor was almost always the issue or the hoses going to it.

Oct 16, 2008 | 1996 Ford Taurus

2 Answers

1999 ford taurus


check the fuel pump itself.. if no fuel going through lines... injectors won't work.

Aug 16, 2008 | 1999 Ford Taurus

1 Answer

Engine codes


P1504 Idle air control circuit malfunction
P1507 Idle air control underspeed error

Jul 27, 2008 | 2001 Ford Mustang

2 Answers

Car codes


I have a ford taurus 2000 and it gave me this codes PO171,PO174,P1504 The car rus good for 20 t0 30 minutes and the car in the stop signs and light turns off but turns back on fast but turns off fast too but it runs good

Jun 09, 2008 | 2000 Lincoln LS

Not finding what you are looking for?
1999 Ford Taurus Logo

1,421 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...