Question about 1995 Toyota Camry

1 Answer

My 95 Toyota Camry is making alot of noises when Im driving, It is a manuls transmisson with front wheel drive sounds almost like drive shaft as gone dry, know nothing about front wheel drive

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Expert
  • 1,114 Answers

There are only a few things that will cause this noise. The first, and most common, is a bad CV (constant velocity) joint. The boot that covers the joint will inevitably dry out and crack, or bust, and at that point, the grease will dissipate, and leave the joint unprotected. That is when road grime, or dirt get in and wear the knuckle out of the joint, thus making the popping sound. You will need to have the affected axle replaced, keep in mind that there are two, one for each wheel. If that is not the issue, then you are looking at a bad wheel bearing, and that too will need to be replaced. Keep in mind that anytime you have work performed on a front wheel drive, minus the brakes, that you will want to have the front end re-aligned to avoid premature tire wear.

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can you tell if front wheelbearings are bad


If you hear a squeaking noise or a poping noise when you turn you have a problem with the CV joint, which part of the drive train.

Jun 14, 2014 | 1998 Toyota Camry

1 Answer

Front wheels not turning in 4wheel drive 1996 dodge dakota


Check and make sure the transfer case is adjusted right If the front end was broke you would know it. Jack up one front wheel and put it in 4wheel drive but not lock and see if the front drive shaft turns if it doesn't you need to adjust linkage or if it's electric make sure the signal is getting to the transfer case. If it only locks front and rear jack up one rear wheel also and do the check. Most people with 4 wheel drive don't know they have two wheel drive One in the rear and one in the front unless you ordered a locking dif from the factory they don't come this way. Then you would have 3 wheel drive

Dec 02, 2011 | 1996 Dodge Dakota

1 Answer

I have a 96 F150 4x4. I heard a noise that


4 wheel drive trucks make this sound alot im guessing its a manual shift so i would saw that the meshing is more of a grinding instead so i would have the transmission rebuilt to fix the problem or just see if the rings inside the trans. is missing the tooths on it :)

Mar 23, 2010 | 1996 Ford F150 Regular Cab

1 Answer

Drives rough vibrating steering wheel


Check the CV shafts for excessive play

Oct 12, 2009 | 2000 Toyota Camry

1 Answer

1991 toyota camry front drivers side makes noise while driving


It's the left front wheel bearing. Take it to your favorite mechanic if you have one, any good tech can do it, but he/she could run into complications with a car of that age. (The hip bone's connected to the thigh bone, the thigh bone's connected to the knee bone, etc, and there's probably a good share of corrosion down there).

Jul 04, 2009 | 1991 Toyota Camry

2 Answers

Breaking noise in the front wheel


it could be the joint in the c/v axle. or it could be that you have something loose in the steering linkage. i would not advise you to drive it until it is inspected. better safe than sorry.

Sep 01, 2008 | 2003 Toyota Corolla

1 Answer

Cracking or breaking sound when turning mainly when parking


I doubt it. I heard the same noise from my old Accord when the CV boot was going out. If you heard breaking from the drive shaft I believe the next thing you'd see is it rolling down the street. If the drive shaft were making that sound you would not be able to continue driving.

Aug 28, 2008 | 2003 Toyota Corolla

Not finding what you are looking for?
1995 Toyota Camry Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...