Question about 2006 Nissan Altima

1 Answer

Desperate help needed with immobiliser on 2006 Almera. I have spent a fortune and noone can get it right :it starts and goes for a couple of days, then won't start have (I think) recoded the system, oh so mant times with first disconnect fuse 12 in engine and leavinving for 15 minutes, (worked once)then use this message I got that says turn ignition on and off 6 times, leave off press open button and then at samme time click close button 3 times????, tried disconnecting the immobiliser system, and again nothing, I would so very appreciate some help, as on my own, and totally dependant on the car, and you have always been spot on with the right answers. Kind Regards, Allan

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 166 Answers

It sounds like the computor needs reflashed, a deal or garage could do this.

Posted on Mar 16, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have replaced the battery on a nissan almera tino and now it won't start. It turns over OK but will not fire.

I changed the battery as it was struggling to start over a few days and then died completely after being left over a weekend. After the replacement all electrics worked but the engine wouldn't turn over, it just clicked. There was no immobiliser warning or messages on the screen. I tried a few of the things on this forum but it turned out to be a broken battery earth cable where it attaches to the gearbox under the car. I removed the cable (easier with the battery tray removed) then had a new lug attached to the end. Total cost 1.50. phew!

Jan 16, 2012 | 2005 Nissan Almera Tino

1 Answer

My 2006 nissan pathfinder has a problem starting in the cold. there no check engine light on.and all summer started like a champ. no that its been 50 degress its just turning over then after a couple of...

you may have an issue with ECM/computer relay in the IPDM (inteligent power distribution module) nissan has an campaign for the relays. go to your nissan dealer and give them your vin number to se if it needs to be replaced. it will be free of charge to you if it does need to be replaced.

Sep 19, 2011 | 2006 Nissan Pathfinder

1 Answer

Desperate help needed with immobiliser on 2006 Almera

This is quite an easy problem haha. I am currently doing my remote start for the same car right now and I know that issue you are having. After 1 or two full failed attempts to start your car the ECU knows not to turn on because it is locked. You have to put the key in the key cylinder, turn it to the on position but don't start the car, then count to 5 and then turn off the car and pull out the key for 5 seconds. Do this for a total of 3 times and the system resets. As for getting rid of the immobilizer that will be unlikely due to the fact that it sends info to the ECU to authorize it to turn on the car. However, you can bypass it like I did and then you will be able to use remote start and all the other good stuff. There are 3 types of ways to bypass the immobilizer but it will cost from 30 to 50 bucks.

Mar 16, 2011 | 2006 Nissan Altima

2 Answers

2006 golf 1.4 fsi-

Hi, just a random idea: are all the cables to the plugs okay? If there is no ignition, the problem could be there.

Oct 08, 2009 | 2006 Volkswagen Golf

1 Answer

Engine warning light on Nissan Almera 03

its very simple. You can see a black hose from the engine which connects the metal pipe. just remove it and you can see three gold color pin from the metal pipe. scratch that pins using a salt paper and fix it. Now check whether you get started or not. Thanks.

Jul 03, 2009 | 2003 Nissan Altima

1 Answer

Hi i have a mitsubishi lancer 1.3 petrol 2006, i

wow ok i am from australia our lancers only come in a 2.0 or 2.4 i was shocked to see a 1.3 lancer
now with the key
every time you incert the key into the ignition it reads the key as there is a chip in the orignal keys so thatway the immobiliser knows thatit is safe for the car to start
if the cra can not read the key it will not let the car start evan if it is twisting to start etc
you need to go to mitsubishi and have them copy some new keys and let them reset the codes on the immobiliser if you try to do so your self it may trigger a cold shut down
this is when the immobiliser its self needs to be replaces as well as the keys
hopes this helps

Jul 02, 2009 | 2006 Mitsubishi Lancer

1 Answer


is it a high pitched grinding noise?

Nov 24, 2008 | 2006 Land Rover Range Rover Sport

1 Answer

Nissan Almera Tino Right hand side

YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,


May 20, 2008 | 2006 Nissan Z

Not finding what you are looking for?
2006 Nissan Altima Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76848 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides