Question about 2005 Ford Freestyle

1 Answer

Slopply accleration and once in awhile wrench warning ligtht comes on a car stalls. I turn car off and restart and goes away, but check engine light remains

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 166 Answers

Sounds like you need to goto autozone parts store and have them use the scan code reader and it will tell you what is wrong or what is needed to peplace,the guy there who scans it will give you a printed read out and it will list what needs replace,,,,,,,,,FREE,,wont cost a dime for him to do this

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

02 Honda Civic LX (automatic) randomly stalls while idling at a stop sign or light. Help?


check timing, adjust valve clearance, check vacuum leaks. these are some that need attention.

Apr 14, 2017 | 2002 Honda Civic

1 Answer

Help. check engine light comes on also yellow open end wrench light comes on.


Have you had the engine computer checked for trouble codes ?

Sep 05, 2015 | 2005 Lincoln LS V6

1 Answer

Engine warning light comes on and after a day or two goes off


once in awhile it might be a loose fuel cap, be sure it clicks several times when you put it back on,

Sep 03, 2014 | 2010 Ford Kuga 2.0

1 Answer

Check engine light, car slows down


the engine light came on and the sensors immediately put the car in limp mode reducing the power to allow you to pull over and do the vital checks (oil -water and engine temperature ). have the fault codes read to see which sensor put the lights on.

Mar 03, 2014 | Hyundai Santa Fe Cars & Trucks

1 Answer

My 2007 Chevy Silverado loses power when I come to a complete stop no engine lights appear but if I turn off the truck the problem goes away for awhile .


Loss of power, but no mention of rough or inability to idle (including stalling). If those additional symptoms are part of the problem, check for a vacuum leak to the intake. Listen for hissing or sucking noises near air hoses. Look for loose, cracked, or broken air hose connections. Check PCV valve...Cheap to replace, could be sticking, then loosen after truck sitting with engine off. A vacuum leak will not give any light indications, and vehicle will seem to run normal when applying gas, but will want to stall or run rough (or want to stall) when at idle or sometimes when taking foot off gas when slowing down.

Oct 08, 2013 | Chevrolet Silverado Cars & Trucks

1 Answer

2001 vw cabrio--when i acclerate the cars stops and I have to restart with same result. Check engine light was on but replaced oxygen sensor, which fixed problem. 7 days later, the check engine light is...


It could be the same problem or a totally different problem. You can take your car to AutoZone and have your car scanned with a OBD II scanner for free and see which codes are coming up now.

Jun 01, 2010 | 2001 Volkswagen Cabrio

1 Answer

2000 Isuzu Rodeo ls V6 4 wheel dr.


Check the fuel pressure it could be the fuel pump or pressure regulator.

Apr 28, 2010 | 2002 Isuzu Rodeo Sport

3 Answers

2004 Envoy xl stalls when making turns


this is caused by slow engine idle speed, do the procedure below.
Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.



Jun 16, 2009 | 2004 GMC Envoy

1 Answer

2004 Ford Escape 3.0 L V6 Auto 200k+


sounds like the idle control valve is sticking. it is located at the throttlebody at the air inlet. try tapping on it and see if the idle goes up

Apr 15, 2009 | 2004 Ford Escape

Not finding what you are looking for?
2005 Ford Freestyle Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...