Question about 2006 Nissan Altima

1 Answer

Desperate help needed with immobiliser on 2006 Almera

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 359 Answers

This is quite an easy problem haha. I am currently doing my remote start for the same car right now and I know that issue you are having. After 1 or two full failed attempts to start your car the ECU knows not to turn on because it is locked. You have to put the key in the key cylinder, turn it to the on position but don't start the car, then count to 5 and then turn off the car and pull out the key for 5 seconds. Do this for a total of 3 times and the system resets. As for getting rid of the immobilizer that will be unlikely due to the fact that it sends info to the ECU to authorize it to turn on the car. However, you can bypass it like I did and then you will be able to use remote start and all the other good stuff. There are 3 types of ways to bypass the immobilizer but it will cost from 30 to 50 bucks.

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Immobiliser


I regret ti inform you we have no wiring diagrams availiable

Mar 26, 2014 | 2006 Tata Indica LSi

1 Answer

Colt ecu change


The ECU would have to match the part number EXACTLY. You're much better off getting your current ECU rebuilt and programmed by the rebuilder.

Aug 26, 2017 | 2006 Mitsubishi Colt

1 Answer

Have replaced the battery on a nissan almera tino and now it won't start. It turns over OK but will not fire.


I changed the battery as it was struggling to start over a few days and then died completely after being left over a weekend. After the replacement all electrics worked but the engine wouldn't turn over, it just clicked. There was no immobiliser warning or messages on the screen. I tried a few of the things on this forum but it turned out to be a broken battery earth cable where it attaches to the gearbox under the car. I removed the cable (easier with the battery tray removed) then had a new lug attached to the end. Total cost 1.50. phew!

Jan 16, 2012 | 2005 Nissan Almera Tino

1 Answer

How do i repair rear suspension bushes on my nissan almera, i have a knocking sound on passenger side. the car is a nissan almera 1.5 s 2006.


question....are you saying that the rear suspension bushing problem and the knocking sound are one in the same.

Apr 25, 2010 | 2006 Nissan Altima

1 Answer

Hi i have a mitsubishi lancer 1.3 petrol 2006, i


wow ok i am from australia our lancers only come in a 2.0 or 2.4 i was shocked to see a 1.3 lancer
now with the key
every time you incert the key into the ignition it reads the key as there is a chip in the orignal keys so thatway the immobiliser knows thatit is safe for the car to start
if the cra can not read the key it will not let the car start evan if it is twisting to start etc
you need to go to mitsubishi and have them copy some new keys and let them reset the codes on the immobiliser if you try to do so your self it may trigger a cold shut down
this is when the immobiliser its self needs to be replaces as well as the keys
hopes this helps
ricko

Jul 02, 2009 | 2006 Mitsubishi Lancer

1 Answer

Nissan Almera Tino Right hand side


YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

May 20, 2008 | 2006 Nissan Z

Not finding what you are looking for?
2006 Nissan Altima Logo

1,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...