Question about 1999 Chrysler Sebring

1 Answer

I have a 1999 Chrysler Sebring. Power steering skips/ twitches while turning wheels only when stopped. Floyd level is good and belt is ok. Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

Either air is in system or belt is slipping. Belt may LQQK good, but check to see if it's glazed or contaminated with oil/fluids.

Posted on Mar 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Steering wheel not turning as usual on 2001 chrysler sebring


power steering pump belt fell off.,or loose/ fluid is low/ pump is shot/ power steering ram is wornout/damaged. did you hit/slide front wheel into a curb?

Mar 02, 2015 | 2001 Chrysler Sebring

1 Answer

How do I fix grinding whinding noise on 2009 Chrysler Sebring


Hi, That sound maybe coming from the power steering pump. Check oil level and check belt tension. It maybe time for a new belt.
If noise presists see you local mechanic for further help. Good luck.

Dec 15, 2014 | 2009 Chrysler Sebring

1 Answer

Power steering problem


Sounds like the pump pressure valve is not working when cold and should be replaced.> It is inside the pump where the pressure line connects to the pump.

Mar 24, 2012 | 2005 Chrysler Sebring Sedan

1 Answer

How to bleed power steering system to a 1997 chrysler sebring


Very simple!!! I posted this under how to bleed the steering system in the "Tips" section....you can do this yourself and is very easy.

Sebring Coupe And Avenger
  1. Check the power steering fluid level, and add if necessary.

Use only MOPAR ATF PLUS automatic transmission fluid type 7176, DEXRON II automatic transmission fluid, or equivalent, in the power steering system.

  1. Raise and safely support the vehicle to lift the front wheels off the ground.
  2. Manually turn the pump pulley a few times.
  3. Turn the steering wheel all the way to the left and to the right 5 or 6 times.

If bleeding is attempted with the engine running, air will be absorbed in the fluid. Bleed only while cranking the engine.

  1. Disconnect the ignition high tension cable and, while operating the starter motor intermittently, turn the steering wheel all the way to the left and right 5-6 times for 15-20 seconds. During the bleeding procedure, make sure the fluid in the reservoir never falls below the lower position of the filter.
  2. Connect the ignition high tension cable, then start the engine and allow it to idle.
  3. Turn the steering wheel left and right until there are no air bubbles in the reservoir. Confirm that the fluid is not milky and that the level is up to the specified position on the dipstick. Also confirm that there is very little change in the fluid level when the steering wheel is turned. If the fluid level changes more than 0.2 inches (about a 1/4 inch), the air has not been completely bled. Repeat the process.

    // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 26; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; c17hydro_19.gif

      Check whether or not the fluid level changes between when the engine is running and when it is stopped

    Nov 13, 2010 | 1997 Chrysler Sebring

    3 Answers

    The steering wheel makes a creaking sound everytime you turn it, could that be powere steering belt or something? It is full of ps fluid.


    Check the belt to see if it's tight enough and check the power steering fluid reservoir to make sure it's full to the full mark. If neither of these are the problem the power steering pump is the problem.

    Oct 31, 2010 | 2002 Chrysler Sebring

    1 Answer

    Power steering went out has fluid cant turn steering wheel


    Hi, it sounds like your power steering pump or rack has died. Is the belt ok & tight on the pump? If no fluid lost, no loose belt etc, will most likely be pump, hope this helps :)

    Jan 11, 2010 | 1999 Chrysler Town & Country

    1 Answer

    Power steering pump froze and threw the belt. had the pump replaced and still no power steering. do not know if the system was purged. what else could it be? rich 1993 chrysler fifth ave. 3.3 eng.


    Check the fluid for any contaminants and for proper level. Jack up the entire front end so that both front wheels are clear of the ground. Start the engine and let idle. Turn the steering wheel from stop to stop a number of times to circulate the ps fluid through the hoses, steering valves, and cylinder. Keep checking the fluid level while doing this. With luck, this will restore ps function.

    Sep 14, 2009 | 1993 Chrysler New Yorker

    1 Answer

    1997 chrysler sebring steering squeaks when turning either way


    check the power steering fluid and the condition of the drive belt

    Mar 08, 2009 | 1997 Chrysler Sebring

    Not finding what you are looking for?
    1999 Chrysler Sebring Logo

    101 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...