Question about 2008 Ford F 250 Super Duty 4WD

1 Answer

@I have a ford f 250 2008 and I have a 0087 and a 0088 code I have cleared the codes and the truck still has no power please help stuck in washington driving to ft hood tx

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

CODE PO87 FUEL RAIL SYSTEM PRESSURE TOO LOW. AND CODE PO88 FUEL RAIL SYSTEM PRESSURE TOO HIGH. SOUND LIKE PROBLEM IN THE FUEL PRESSURE REGULATOR OR FUEL RETURN LINE STOPPED UP.

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2004 Ford F-150 5.4 triton and I was reading a bad code retaining to the coolant temp sensor so i replaced the cylinder head temp sensor as shown and now I'm reading a code for the cylinder head...


You have to clear the codes. Go to your Ford dealer (not all can do this). The cheaper solution is go to your local auto parts store and ask them to clear the codes. It's usually free. Sometimes some codes won't come off when you use the "remove the positive cable from your battery and touch it to the negative post for about 10 seconds". Careful hear, do it right as if you get a spark you are doing something wrong. As to the auto parts store they can or should give you all the codes including the new ones as I think you didn't disconnect the battery when you you changed the sensor.

Mar 27, 2015 | 2004 Ford F150

1 Answer

Code p1537 foe a 2002 ford ranger 2.3 engine


P1537 - Intake Manifold Runner Control Stuck Open.

You might want to look at the IMRC valve. It is probably sticking from carbon build up? Use top engine cleaner and clean the air plenum.

Once you have done this clear the codes and go for a ride. About 30 miles should do it. If you have anymore codes it will come back up.

Jan 10, 2012 | 2002 Ford Ranger Regular Cab

3 Answers

Can anyone tell me what does the following codes mean for my 2006 Ford F-150 Pick up 4.6 litre The codes are as follows: P210406, P2111, P2112, and P2135.


code p2111 throttle actuator control system actuator stuck open. throttle actuator control system circuit malfunction. brake vacuum implausible signal. code p2112 throttle actuator control system actuator stuck closed.throttle actuator control system circuit malfunction. code p2135 accelerator pedal position sensor switch a b voltage correlation. throttle position sensor switch a b voltage correlation. electronic throttle position sensor switch 1 implausible signal. did not see code p210406 that code too long.

Apr 15, 2011 | Ford F-150 Cars & Trucks

1 Answer

Po766 code? p2703 code?


P0766 - Shift Solenoid D Performance or Stuck Off.

Check in THIS LINK the test and solution procedure.

Both codes are related to the Direct clutch (5th gear). Code 2703 states to change out the solenoid (SSPC-D)and clear the code. If the codes come back then you must overhaul the trans and repair the leaking or slipping direct clutch.

zjlimited_3.png


Hope this helps (rememnber to rate this answer).

Jan 12, 2011 | 2004 Ford F350

1 Answer

P1537 code


P1537 IS INTAKE MANIFOLD RUNNER CONTROL STUCK OPEN, HOPE THIS HELPS YOU, SEND ME A FEEDBACK PLEASE THANKS . HERES THIS LINK SO YOU CAN CHECK OUT THIS AND LOTS MORE CODES ITS VERY HELP FULL. BUT I CHECK IN MY AUTO MANUAL BOOK ON YOUR VAN IT GIVES ,ME THE SAME CODE.
http://www.obd-codes.com/trouble_codes/ford/
SEND ME A FEEDBACK PLEASE

Aug 02, 2010 | 1998 Ford Windstar

4 Answers

2008 Ford F250 6.4 turbo diesel, have 3 DTC codes


P0087- low pressure fuel system. Fuel pressur valve stock open, Fuel volume control valve stuck close, Leaking fuel injector,P0088- fuel pressure contorl valve stuck close, Fuel rail pressure sensor P2291-all @ at the above, means to say poor fuel quality

Jun 21, 2010 | 2008 Ford F 250 Super Duty 4WD

1 Answer

I have a 2003 ford escape. Check engine light came and my code showed P1405 code. Replaced EGR valve and sensor. Code does not show up on pocket scanner, but the escape stills loses power and will barely...


On alot of cars you must erase the code after repairs,the code is pending in the memory and can still run bad till cleared.try clearing the code

Jan 12, 2010 | 2003 Ford Escape

1 Answer

Lost power to 4x4 switch can,t get out of four wheel low.


I've seen this on one ford before. The guy was in 4x4 and the switch would not release it. We tested all the components and like you stated all was good. There just happen to be a code in the computer that really did nt suggest a cure for this. So we cleared the code and click, right away the switch worked. So try disconnecting the battery for about 15 minutes to get the computers to completely discharge and hopefully erase the code.. If this does nt work you may need a scanner to see if there is a code. The code in my case was in memory and no lights were on because of it.

Jul 18, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Engine codes


HAVE ENGINE CODES P1537 & P1538 WHICH ARE INTAKE MANIFOLD RUNNER CONTROL STUCK OPEN BANKS 1 & 2.
YOU CAN TRY TO CLEAN THEM,BUT ITS NOT LIKELY THAT YOU CAN CLEAR THE CODES.

BUT DONT WORRY THIS PROBLEM IS COMMEN ON THIS MODEL OF FORD.

GOOD LUCK...

Sep 09, 2008 | 1998 Ford Windstar

2 Answers

Ford fusion 1.4, 54 reg


Hi, what happened is the excess fuel from the misfire has caused the converter to wear out. Replace converter.

Aug 11, 2017 | 2004 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...