Question about Kia Sephia

2 Answers

What degrees t.d.c. do you set the 2000 Sephia 4 cyl?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 14,036 Answers

THE PCM CONTROL TIMING.YOU HAVE DISTRIBUTORLESS ENGINE.LOOKING AT TIMING ON A SCANNER TIMING IS 3 - 13 DEGREES BTDC.

Posted on Mar 16, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

On your model there is no distributor al the spark comes from the coil packs.So if your timing is off you can check it but you cant adjust it.If your timing is off its probably a bad camshaft position sensor ,a bad crankshaft sensor,a bad Power control module or incorrect installation of the timing belt.Check all of your alignment marks that there all where there supposed to be on the camshafts and the crankshaft.On the camshafts the dots on the camshafts line up with the arrows on the valve cover and the crankshaft line up the arrow with the notch in the pulley.If these are correct then I would recommend having the other sensors tested for proper operation at a local service station.

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to set the timing for a 1967 gmc 6 cylinder pickup


Okay...here we go....if you have the original 6 cyl motor (not sure what size motor you have though):

194 cu.in.--automatic---8 degrees BTC

230 cu.in.--standard---1 degree BTC

250 cu.in.--automatic---4 degrees BTC

292 cu.in.--standard--1 degree BTC

May 07, 2011 | GMC G1500 Cars & Trucks

1 Answer

My 2000 sephia doesn'l start when outside temps get down around 0-10 degrees overnight. it starts fine any other time.


i have the same problem have yu tried jumping it? always works for me :) or pushing it down a hill if its a stick shift and popping the clutch... but seems like lots of ppl have this problem as well!

Jan 09, 2011 | 2000 Kia Sephia

1 Answer

Cylinder head bolt torque specs for 2000 Cadillac catera 3.0L 6 cyl


YOU NEED NEW HEAD BOLTS OLD HEAD BOLTS BEEN STRETCHED. YOU HAVE TORQUE HEAD BOLTS IN FIVE PASSES. FIRST PASS TORQUE HEAD BOLTS 18 FT LBS. SECOND PASS ADD ADDITIONAL 90 DEGREES.THIRD PASS ADD ADDITIONAL 90 DEGREES.FOURTH PASS ADD ADDITIONAL 90 DEGREES.FIFTH PASS ADD 15 DEGREES.

Dec 22, 2010 | 2000 Cadillac Catera

1 Answer

Where is the temperature gauge hand supposed to


The needle should stay at or just below the 3/4 mark but it may go slightly higher but that would be rare. An example would be driving with the car loaded with 4 people, a/c running on high with outside temperatures of 95 degrees or more.

May 05, 2010 | 2000 Kia Sephia

1 Answer

I have a 2000 Kia Sephia that all of a sudden won't start, the temperture in my area is around 7 degrees, I got a new battery but still won't start what could it be?


if the car dosent make any sound then its the starter. i the same problem i didnt fix it yet but i think thats what it tis. it could also be the engine fuse.

Jan 04, 2010 | 2000 Kia Sephia

1 Answer

Over heated put crack in radiator fixed but now it won't start,it tries I checked fuses what could be wrong


alot could be wrong. to start the radiator needs coolant to run through it. if that doesnt happen then the car over heats. need new radiator and new fan probably also.

Jun 02, 2009 | 2000 Kia Sephia

2 Answers

Need timing settings for 2000 kia sephia


hanes manual has a photo is it dohc

Jun 02, 2009 | 2000 Kia Sephia

1 Answer

How to set the timing in the kia sephia 2000 model


You need a timing light and a new belt

May 05, 2009 | 2000 Kia Sephia

1 Answer

Transmission fluid capacity for 2000 Kia Sephia?


The four speed automatic shows a total fill (that is all the fluid it can hold) is 5.7 Quarts. So if you just dropped the pan and relplaced the filter, you shouldnt need more than 4 quarts and likely you would have a little extra with that.

Dec 29, 2008 | 1999 Kia Sephia

1 Answer

I bought a used car this week. Radio does not work. How can I remove it to instal a new one. Kia Sephia 2000 1.8 Than you in advance for your help.


I have a 2000 kia sephia and you just take two screws behined the weel where the speedomitor is and pull slowly apart the plastic cover and then there are 4 srews to take it out un plug the wires to radio. Then you good.

Sep 13, 2008 | 2000 Kia Sephia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...