Question about Dodge Dakota

2 Answers

The 4 wheel drive will not change to 2 wheel drive

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Expert
  • 1,114 Answers

If this is shift on the fly/electronic shifting, then you may have a faulty switch. First check the fuse panel to ensure that you have not blown a fuse. I would try doing this before I replaced the switch. If that is fine, then get underneath the vehicle, and while someone is in it, have them push the 4x4 button while you tap on the electric motor with a hard rubber mallet. If this does not work, then see if you can unplug the electric motor, and plug it back up, it may have lost connection.

Posted on Mar 16, 2011

  • Valerie Teeters
    Valerie Teeters Jun 09, 2015

    can you tell me where to locate the fuse for the TCCM on an 05 Dodge Dakota SLT Quad cab V8 4Wd?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

If it is a automatic 4x4 the vacumm line my be off or leaking somewhere

Posted on Mar 16, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 jimmy wont go back to 2 wheel drive


Check everything in that right front driveline. Could have a problem that when the four wheel drive puts some tension on it, it stops making noise.

Mar 17, 2013 | 1997 GMC Jimmy

1 Answer

My 1999 Tahoe skips when i turn my wheels sharp going real slow in 2 wheel drive and not in 4wheel drive


This can be caused by worn out fluid inside the 4 wheel drive transfer case, have the fluid changed, it takes DEXRON 6 ATF. The fluid should be changed every 30,000 miles sonner is you use the 4 wheel drive often. There is a drain plug and a fill plug on the rear of the case at the rereat of the transmission. Fill to just below the plug threads.

Jun 28, 2012 | Cars & Trucks

1 Answer

Change clutch


Sounds like transfer case issue if 4 wheel drive works and 2 wd does not. Clutch slippage would be worse in 4 wheel drive more than 2 wheel drive, more to push.

May 16, 2010 | 2003 Toyota Tacoma

2 Answers

Just got H 2 2005 4 buttons 4 the 4 wheel drive


Use 2 wheels, the other 4wd low ,for climbing at slow speeds: 4wd high, for driving on low traction roads,like mud or snow,at medium speeds: 4wd auto full time all wheel drive, for highway speeds on slippery surfaces, like rain or light snow.

Jan 12, 2010 | 2005 Hummer H2

1 Answer

My 2001 silverado w/69,000 miles has no light indicating 2 or 4 h


THE TRANSFER CASE MOTOR IS NOT WORKING TO INGAGE 4 WHEEL DRIVE. CHECK WITH DOOR OPEN WHEN YOU PUSH 4 WHEEL SWITCH YOU SHOULD HEAR MOTOR INGAGE 4 WHEEL DRIVE. IF YOU HEAR MOTOR BUT STILL NO 4 WHEEL DRIVE THE GEAR ON MOTOR COULD BE DAMAGED. REPLACE TRANSFER CASE MOTOR.

Jan 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

4 wheel drive lock up


hey charlie, 1st problem is 4 wheel drive being engaged on dry pavement. You should only have it in 4x4 in snow, or off road on sand, dirt,etc. Newer all wheel drive vehicles compensate for the tires rotating at different speeds, like going around a sharp corner. The wheels on the outside of the turn have a longer distance to travel than the wheels on the inside of the turn. This results in the vehicle feeling like it's jumping, hopping or jerking as you cut a tight turn. You can damage your 4x4 system, as the wheels are fighting each other, trying to turn the same # of rotations, and something can and will give (like blowing the transfer case). If your light is staying on after changing to 2 wd, it is possibly stuck in 4x4. To shift from 4wheel to 2 or 2wheel to 4, you should be traveling in a straight line, let off the gas, change in or out of 4x4, resume driving. 4x4 low range requires a complete stop to engage.

Oct 15, 2009 | 1992 Dodge Dakota

2 Answers

Fly wheel needs to be replaced


Yes you do. If it's 4x4, i find it easier to pull the motor.

May 04, 2009 | 1989 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...