Question about 1993 Nissan Quest

Open Question

Small misfire 1993 nissan quest changed spark plugs,wires,distributor only at stop any ideas

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 156 Answers

SOURCE: Removed & replaced dist. cap and rotor on 1993 S10 Blazer 4.3 V-6

The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Posted on Jul 03, 2009

Ad
ZJLimited
  • 17970 Answers

SOURCE: I need the spark plug wiring for a 1993 jeep 4l

The firing order can usually be found cast onto the intake manifold
d89ea9b.jpg

4.0L engine Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
42e3dc6.jpg

Good luck (remember rated this help).

Posted on Sep 03, 2009

ZJLimited
  • 17970 Answers

SOURCE: need wiring digram from spark plugs to distributor cap

Review the Jeep ZJ Repair Manual in the Firing Order (page 10 and 11) for 4.0L 6-cyl and 5.2L 8-cyl.

I really hope hepled with this (remember rated this help) Good luck.

Posted on Nov 18, 2009

  • 1757 Answers

SOURCE: I need a wiring diagram for the spark plug wires

For the 1999 Nissan Quest 3.3L SOHC V6:

Firing Order:
1-2-3-4-5-6


Cylinders:
......(back)......
|...1....3....5...|
.......................
|...2....4....6...|
......(front)
Distributor:
..... 2
3.........1
4.........6
......5

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on Jun 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xterra distributor


More likely bad spark plug wires

Feb 19, 2014 | Cars & Trucks

1 Answer

V6 engine misfire


Next is distributor.Wire and plugs you did right thing.

May 01, 2013 | Nissan Cars & Trucks

1 Answer

My 2007 nissan quest stopped running while driving down the road and refuses to start now. It popped a bad cam sensor code so I changed both of them and the crank sensor. When I try to start it it cranks...


In the Nissan Quest, 1993-02, the cam sensor is in the distributor and replacing the distributor fixes it. Usually the engine runs when cold, then fails when it is hot. Not usre where it is on the 2007 Quest.

Rich Porter sells reman distributors on ebay for $200.

We talk about it on our website for Villager Quest owners.

http://groups.yahoo.com/group/villagerquest/

May 04, 2011 | 2007 Nissan Quest 3.5 Minivan

1 Answer

After I replace my timing belt and injectors, I started the motor but it hesitates showing me 0306 # 6 is misfiring, 1105 Fuel pressure selenoid circuit fault, 0325 Knock sensor. Is it good idea to test...


I would think that if the problem was fuel presssure, it would affect all cyliners, not just the one. I would look for a fouled spark plug or a bad plug wire. I had a similar problem with one cylinder misfiring, throwing multiple trouble codes. Turned out to be the distributor cap and rotor.

Dec 14, 2010 | 1996 Nissan Quest

1 Answer

I have a 99 nissan quest. I bought it a couple of weeks ago. I drove it from the place i bought it and it drove really really good. I pressure washed the engine, after that, the engine has been misfiring...


That pressure washing can and probably has damaged a sensor under your hood, but I doubt that a bad knock sensor would cause misfiring. Check your other sensors, lots of them on that engine.

Oct 21, 2010 | 1999 Nissan Quest

1 Answer

What are all of the parts needed for a tuneup for my 95 quests


Spark plugs, spark plug wires, distributor cap, and distributor rotor. If you replace all of these you would be doing what is called a major tune-up.

A regular tune-up would be just replacing the spark plugs.

You can check the integrity of the plug wires and distributor cap by spraying them with water while the engine is running. If the engine runs ruff, stall, or you see spark arcing from either the wires or the distributor cap than they will need to be replaced.

The distributor rotor always gets replaced when you replace the distributor cap.

You can also spray the coil with soapy water to see if it is leaking as well.

Oct 02, 2010 | 1995 Nissan Quest

1 Answer

I need a wiring diagram for the spark plug wires to a 1999 nissan quest


For the 1999 Nissan Quest 3.3L SOHC V6:

Firing Order:
1-2-3-4-5-6


Cylinders:
......(back)......
|...1....3....5...|
.......................
|...2....4....6...|
......(front)
Distributor:
..... 2
3.........1
4.........6
......5

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jun 26, 2010 | 1999 Nissan Quest

2 Answers

I have a 1999 nissan quest and need to change the distributor. How is the timing set after the distributor is replaced?


This is late but may be useful for info purposes. The 1999 Nissan Quest carries a distributor and spark plug wires. Many owners complain having to go through numerous distributors. I went through 2 in one year with only 68K miles.

Jan 08, 2010 | 1999 Nissan Quest

1 Answer

'95 nissan quest stalled at a stop. Will not start, only cranks


I worked on a '93 Quest last year. Couldn't find out why it wouldn't start. It was the distributor shaft not held onto its rotating gear. The roll pin had come out of the gear on the end of the distributor shaft. When the distributor cap was off, the rotor was turning with the shaft while the engine was cranking. So I thought that was okay. But when I put my finger on the rotor and it stopped turning, that is when I found out the problem. It's a stretch, but maybe the techs missed it. Take the cap off, and if you can spin the rotor either way just by hand, the distributor gear has come loose.

Looks like they really covered a lot. I suppose next they will you to replace the ecu. Good luck.

Oct 21, 2009 | 1995 Nissan Quest

1 Answer

Ignition problem


replace the spark plug wires and distributor.

May 23, 2009 | 1993 Nissan Altima

Not finding what you are looking for?
1993 Nissan Quest Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...