Question about Daewoo Leganza

1 Answer

Need timing belt mark diagram for the 2000 2.2 daewoo laganza

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Daewoo Master
  • 3,740 Answers

Hi and welcome to FixYa, I am Kelly

Below are the 2 pictures that should answer your question:


Just note that even with all the timing marks aligned you can still have the ignition timing 180 degrees incorrect. I.e the intake, exhaust and crankshaft can all be in time but the engine will miss-fire back through the intake due to incorrect IGNITION timing.

Thanks for choosing FixYa,

Posted on Mar 16, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cable on power window for 2000 Daewoo Laganza broke in driver's door. How do I repiar?

you need to replace the window regulator there not made to repair

Jul 09, 2012 | 2000 Daewoo Leganza

1 Answer

I need to see the timming mark for 2000 daweoo laganza

I have the diagrams I just need to get them scanned and sent to you. The crank pulley notch will Line up with the notch on the inner timing cover at the six o clock posistion. The intake and exhaust came should be labled accordingly. There should be notches near the labors that line up with the notches on the inner tilling cover at approximately the twelve o clock position.

Oct 03, 2011 | 2000 Daewoo Leganza

1 Answer

Timing belt marks on 2000 daewoo laganza

They are always on the cam and crank. Normally indicated buy dots/line that align. Normally you make sure they are aligned when removing the old belt and if you dont rotate the crank/cam(s) you will not have to adjust the timing.
There's a line on each sprocket that runs through a tooth on each sprocket. These lines should line up in the middle between each sprocket and point toward each other. If they do not line up, turn the crankshaft one more time and they will line up. It takes two turns of the crank to one complete revolution of the cam.

May 13, 2011 | Daewoo Leganza Cars & Trucks

1 Answer

Is the 2.2 laganza i interferance engine upon timing belt failure

Hello. The Daewoo 2.2 is an interference engine. If the timing belt broke while the engine was running, most likely all the valves are bent. In extreme cases the valves can even punch holes in the pistons.

Feb 12, 2010 | 2000 Daewoo Leganza

1 Answer

Timing mark diagram for a 2000 daewoo nubira cdx

here are the timming marks

the other important thing is to
Rotate the automatic tensioner hex–key tab anti-clockwise until the adjust arm pointer of the timing belt automatic tensioner is aligned with the notch in the timing belt automatic tensioner bracket.
then turn engine over 2 turns and recheck marks and tensioner pointer

Nov 02, 2009 | 2000 Daewoo Nubira

1 Answer

Locating camshaft positioning sensor on 2000 Daewoo Laganza

it is under the upper timing belt cover between the camshaft gears. According to the manual touching anything related to timing belt requires removing million parts including right front wheel. I suspect this might be an overkill just to remove upper timing belt cover.

So my advice would be to get it done by some mechanic as u will not be able to do it and may damage other parts also.


May 18, 2009 | 2000 Daewoo Lanos

1 Answer

Daewoo Laganza won't start

How is the timing belt, these are famous for premature failure of the timing belt, they should be changed at 60,000

Nov 30, 2008 | 2000 Daewoo Leganza

1 Answer

2001 Daewoo Laganza Timing Marks

On your request,
For the Crankshaft timing MARK.
You need to remove the cover, the Timing mark is inside.
Your Information is right.
The cam's at 12 O clock. Remember the left side Intake and the right side Exhaust.
Because each of the Cam sproket have the sign , Intake and exhaust

Ok. I hope this help on your question.
I have Pictures of all the marks. But to send you pictures I need any E-MAIL adress.
Because this site don't let me send more than 150kb. and the pictures are around 250kb.

Thank you for use fixya...

Oct 26, 2008 | 2001 Daewoo Leganza

2 Answers

Need a picture diagram of 1999 daewoo Leganza timing belt setting or mars?

need a picture diagram for timing marks nubira 2001 2.0L

Jul 20, 2008 | 2002 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides