Question about 2008 Nissan Versa

Open Question

Driver side door handle fell off. I pulled on the handle and it fell off in my hand, it doesn't seem that the actual handle is broken, maybe a pin fell out? The plastic housing over the lock does have a broken clip. How do I find out what parts need replaced and how do I fix them?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: need to replace driver side mirror

Theres only a few screws on the panel itself, most everything else has plastic clips, so just gently pull it and the clips will come off don't be afraid to use a little force they can be stubborn,

Posted on Oct 03, 2008

  • 57 Answers

SOURCE: Trying to remove door panel. Seems stuck behind door handle.

Under armrest are two large philips screws. remove these and the panel will fall off.

Alternatively, one screw may be acccessed from the top down on the arm rest, remove small access circle, or tray insert.

Posted on Dec 15, 2008

  • 236 Answers

SOURCE: Rear door stuck on 1997 Pathfinder...Have

go inside, lift on handle, then beat the **** out of the door pounding it like your trapped in it trying to get out. latch mechanism is probably corroded and froze shut. once open, spray with wd40 and work the lever a lot. then get door panel off to see if handle is broken inside

Posted on Jun 17, 2009

e-Guru
  • 3917 Answers

SOURCE: sliding door hand broken

Hi,

http://www.daihatsu-drivers.co.uk/node/10940

Thanks

Posted on Jul 07, 2009

old marine
  • 1923 Answers

SOURCE: broken door handle , drivers side 2003 nissan altima

Here is the link to an online site that carries Nissan OEM parts. They have the part you're looking for in 11 different colors for about $35.

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side door handle is broke on the outside and inside, I cannot get the door open to remove the panel.


You may be able to remove the front fender and drive the pins out of the door hinge.

Jan 01, 2014 | 2001 Chevrolet Tracker

1 Answer

2001 BMW X5 Unlocked driver door wont open from inside or outside


handles may be in good condition but the lever on the latch itself may have came loose. your mostlikley looking at dismantelling the apolsery with the door closed to rectify it.

Apr 21, 2013 | 2001 BMW X5 3.0i

1 Answer

Driver side interior door handle doesn't open the door


the arms have fallen on the lock latch inside the door. you have pull off door panel to fix it12_5_2012_11_02_23_pm.png

Dec 05, 2012 | 2006 Buick Rendezvous

1 Answer

Cannot open driver's side door. locking mechanism will not unlatch in door frame where door shuts.


Inspect the inside door handle closely. Those are notorious for breaking. They start by cracking and then it doesn't pull on the rods that go to the latching mechanism hard enough to open the door. Did you notice that it started getting to where you had to keep pulling on the handle harder and harder to get the door to open? If so I would almost bet that you need a new inside door handle. They are pretty easy to replace but you will need to remove the door panel. The latch mechanism may be messed up or maybe just needs some lubrication.

May 20, 2011 | 1995 Chevrolet K1500

2 Answers

My door wont unlock after my driver side door panel fell off as i was opening the door..heeeelp


make sure that none of the wires didt pull loose on the bottome of the switch

Mar 14, 2010 | 2002 Jaguar X-Type

3 Answers

How to replace the exterior door handle,both sides,on a 1992 Chevy S10 pick up. Is there an on line illustrated manual I can download or copy? I will need step by step instructions. Illustrated step by...


remove seat belt bolts and pull it out. the rest is just held in with tabs.

..or if you want Forget taking the door apart - just remove the two bolts holding the latch assembly to the door - Pull the latch assembly out far enough to see the pin that goes through the broken handle - drive the pin out far enough to remove the handle - insert new handle that you just removed from the replacement latch assembly - drive pin back in - Throw the rest of the replacement kit away since all that was broken was a tab on the handle you just replaced.

hope this helps a lot. :)

Feb 13, 2010 | 1992 Chevrolet S-10

1 Answer

The driver-side rear door simply won't open. I was going to get my little boy out of his car-seat and the door won't open, so I just had to go to the passenger side. The child locks are on, fyi. The...


Either that child locking feature is at fault or a rod that connects to the handle in the door fell off That are the two choices there is that can be wrong with it

Feb 06, 2010 | 2008 Mazda MAZDASPEED MAZDA3

3 Answers

Doors won't close


Manually UNLOCK the door button or slide. HOLDING the OUTSIDE DOOR HANDLE in the OPEN position, with your other hands finger, LIFT OPEN the latch, and close your door. Hope this helps.

May 24, 2009 | 1994 GMC Sierra

3 Answers

The sliding door handles of my 1998 Toyota Sienna have both broken.


I replaced both of my sliding door handles this weekend. It was actually pretty easy. Cheapest I could find the handles was a little over $70 each. The interior panel is held on with one screw and 10 nylon clips. The one screw is in the cup holder. Put you hand in the cup holder and push out at the bottom. It pops right off exposing the one screw. I started on the clips from the top at a corner. Seemed to be the easiest place to slide a screw driver under. Once I got the screw driver in, I started working my fingers under the panel. The clips run mostly along the top and bottom about 6 inches from the edge. I made an effort to apply the force as close to the clips as I could to reduce flexing the panel. Once I got the first clip to pop out the other followed pretty easy and the panel lifted right off. Carefully peel back the plastic barrier. The exterior handle is held on with two 10mm bolts. Connecting the short cable was pretty obvious once you could see everything. Now I have to teach everyone to open the side doors very gently! Hope this helps.

Sep 21, 2008 | 1998 Toyota Sienna

1 Answer

Broken door lock on a 2003 honda civic


There are retaining screws around the handle and the door release handle. The screws may be covered with plastic circle cover. Take those out and just start pulling the plastic panel away from the door gently yet firmly. Once you get the panel loose lift up on the panel to get it off the door.. be careful or wires that may be connected to the panel when you take it off the door.

Sep 05, 2008 | 2003 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...