Question about 1996 Toyota Camry
This may be the location: There
is a power main relay, it's located on the rear of the junction block in the left side of the dash behind the cover, on the front are the fuses and on the rear is the relay, it's the one closest to the center of the car, there are two other relays, these are identical so you could swap one of them and see if that fixes the problem.
If that doesn't do it, one cheap way to find this info is a Chilton manual at the library.
Posted on Mar 16, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look in the Engine bay fuse box at Fuse #12 this should be for the power windows. If this checks out OK, it could be a fault with a bad ground wire in driver's side door harness. You should be able to pry the runbber boot from the drivers door, and check the larger Black wire that goes through it. These have been known to break after a few years use. If it is the cable, cut neatly, strip the ends anu use a crimp splice. Hope this is a quick and easy fix for you. If it helps you solve the problem, Please take a moment to rate as Fixya! Thanks.
Posted on Jun 17, 2008
relay for electrical windows is located underneath the arm rest in the drivers door if memory serves me right.
Posted on Feb 24, 2009
if you can here relays when unlocking/locking check for power at door lock actuators inside doors, if you have power on lock/unlock and good earth from connector actuators are faulty.
if no power on test light when operating check output from central door lock module while operating, none coming out of module then it might need replacing.
check 30Amp power fuse for main relay under bonnet (which goes to pin 8 white/blue on module)and 10Amp gauge fuse in cab(pin 1 blue/red on module),pin 15 is also power when relay is on(red/blue) with test light, and module/ actuators.
check outputs from module pin 3 & 4
that go to door locks
Posted on Jul 20, 2009
Tips for a great answer:
Remote will not unlock Rear door ?
Door locks or windows not working on car?
Car door will not close?
All power door locks not working on?
Repairing car Door lock Actuator?
How to Access car door panel?
Vehicle door panel components?
----------Front Door dis-assembly diagram?
Rear Door dis-assembly diagram?
How to test Power door locks? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html
--------This will help.Thanks.
Feb 17, 2012 | Chrysler 300M Cars & Trucks
Aug 01, 2011 | 2006 Hyundai Sonata
Feb 19, 2011 | Buick Century Cars & Trucks
Aug 29, 2009 | 1998 Nissan Pathfinder
May 24, 2009 | 2003 Chevrolet TrailBlazer
Apr 12, 2009 | 1999 Toyota Camry
Jan 31, 2009 | 2005 Jeep Grand Cherokee
Jul 25, 2008 | 1999 Toyota Camry
3,434 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: