Question about Subaru Legacy

3 Answers

1993 subaru legacy fault code error 2 slow flashes then 4 fast flashes what does this mean ?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Subaru Master
  • 3,640 Answers

It means 24 Code 24 ISC solenoid valve fault, go to any auto parts store and they will tell you the fix for this problem code. auto-zone etc.

Posted on Mar 15, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Code #24, bypass air control solenoid valve. You can go to your local library for the steps to diagnos this problem. They usually have good quality, year specific manuals and you can copy them at 10 cents a page...good luck

Posted on Mar 15, 2011

  • carlsonbrian
    carlsonbrian Apr 22, 2013

    Also there are lot's of youtube video helps as well

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 509 Answers

All I can tell you is that it means there is an open or shorted air control valve circuit.

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 93 legacy since new, it`s an "L"4dr auto trans. under117k alway`s maintained,babied `n garaged. Recently had front to back exhaust replace for state inspection. Almost from the day I...


hi it sounds like a sensor may be faulty or getting worn, luckily you dont need equipment to check codes, look under the dash on drivers side and you will see 2 small black plugs close together plug them in with the car off but key on acc and the check light will flash codes, slow then fast. for example if 4 times slow then 2 times fast it means code 42 then just google it for the code meanings

Jul 06, 2011 | 1994 Subaru Legacy Outdoor

2 Answers

Code 32 on my 1993 subaru legacy, what does this mean?


bad o2 senser up strem go to auto zone they will scan your car and sell you the parts then just install them

Jun 08, 2011 | 1993 Subaru Legacy

2 Answers

Retrive check egine codes 1994 subaru legesy


under the drivers dash are 2 loose black plugs, and 2 loose green plugs, put the black ones together and switch on ignition, dont start it, ecl will flash, slow flashes are 10's and fast ones are 1's. codes can be found on bba-reman.com

Jan 03, 2010 | 1994 Subaru Legacy Outdoor

1 Answer

My Subaru Forester engine light and cruise control


could be transmission fault, connect the 2 loose black plugs together under the drivers side dash, turn on ignition, no start, the ecl will flash the code, slow flashes are 10's and fast ones are 1's. codes can be got from bba-reman.com

Dec 29, 2009 | 2006 Subaru Legacy

1 Answer

1993 subaru legacy (non-turbo). I am not getting a spark. I replaced the plugs, wires, coil, cam sensor, and crank sensor. The car will turn over but not start. I checked the codes via service engine soon...


check 2 see if you have power going 2 your cam and crank sensors. if you do make shure the wires havnt poped out a bit... if you have no power there you will have 2 trace the wiring too see if there is a lose connection...

Aug 31, 2009 | 1993 Subaru Legacy

2 Answers

A/t light is flashing 16 times n 1995 subaru legacy


if by a/t you mean automatic transmission try a power purge transmission service it may have a filter sensor that is telling you to service soon

Feb 14, 2009 | 1995 Subaru Legacy

2 Answers

Abs light on, cruise control and engine light 2007 subaru outback


55 EGR Temperature Sensor or Circuit

ABS light is nothing to do with code 55 separate fault circuits.

Under dash there are two wires with mini spades at the end, connect one of them to the single black multiplug in position 2. Thats RHS plug inlet when you hold plug with tab lock on top.
ABS sensor should then flash up error coded. Ignore code 11 thats a initial flash to let you nknow the difference between a fast and slow flash.

Let me know what code flashes up and I will tell you the symptom,

Dan

Jan 01, 2009 | 2002 Subaru Outback

1 Answer

Vdc and engine check lights both on


under dash connect together the 2 green multiplugs. The CEL light (Check Engine Light) will flash. Slow then fast. Count the slow flashes then the fast ones. I.E. code 21 will give 2 slow flashes then 1 fast = 21.

let me know the code and I will diagnose for you.

Dan

Dec 04, 2008 | 2002 Subaru Outback

3 Answers

Transmission fault codes


input the codes in goggle search word it like this "what are DTC's P0000 and so on."

Jul 21, 2008 | 1991 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Brandon Johnson
Brandon Johnson

Level 2 Expert

251 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...