Question about Dodge W150

1 Answer

1973 dodge 318 truck starts and drives fine until 35-40 mph then dies

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Sounds like a fuel supply problem. Does it pop through the carberator as it it is dying, like a lean back fire? If you drove it up a hill would it die before 35 or 40 mph? If the fuel demand excedes the fuel supply the engine will die, but would restart after cranking the engine for awhile. Possibly a plugged fuel filter, fuel line, rotten fuel hose, ( sucking air ) or tired fuel pump. Hope this helps.

Posted on Mar 15, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1994 dodge 318 motor. my van starts and idles fine. when driving my van there is a poping noise around the intake and the motor loses power. i have replaced the distributor(rotor and cap also),...


A sticking or burnt valve . Don't waste any more money on it. Drive it till it dies or until you can get another vehicle. A head job will cost you. And could most likely blow out the rings. Burns oil bad.

Jan 25, 2015 | Dodge Cars & Trucks

1 Answer

I have a 1994 dodge ram 2500 with a 318 the pcm won't send any codes but the truck will start for and run for a bit then start completely missing and eventually die and not start back up until I reset the...


these engine controllers are notorious to go bad. you probably need a new one or yours rebuilt. the 318 should be the 5.2l magnum engine if memory serves. the powertrain control module (pcm) is located on the firewall at the right-hand rear corner of the engine compartment. ill include images for ya. call me if you want this resolved. 800-921-9060 regards,
-tim
25377625-pfwo1vy3s3oqylnokz45nadq-3-0.gif

Jan 21, 2015 | Dodge Cars & Trucks

1 Answer

How many times does a transmission supposed to shift starting from drive in a 1988 dodge ram with a 318 motor


Depends if you have a regular 3 speed automatic, or a 3 speed with overdrive.
Put it in drive, it will start out in first gear, then shift into second at about 15 MPH, into third at about 30-35 MPH. With overdrive, fourth gear will kick in at about 45-55MPH.

Oct 07, 2013 | Cars & Trucks

1 Answer

1992 Dodge 250 van, 318, Automatic - Dies when coming to a stop


I cannot see how adding a fuel additive would help to be honest. I would be looking for a split or leaking vacuum line, I have even seen a leaking evap canister before that caused a similar problem. Does the engine pull clean and strong when it is warm or at cruising speeds? Does it feel like its running lean or misfiring?

Apr 08, 2009 | 1992 Dodge Ramcharger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...