Question about 2007 Suzuki Grand Vitara 4WD

1 Answer

How to get the bolts out of the torque converter for 2000 grand vatara

Posted by on

  • yadayada
    yadayada Mar 15, 2011

    Under the truck

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 83 Answers

Have someone holding the crackshaft pulley bolt from turning while you lose off the bolts from the torque converter.
Please dont forget to rate me.

Posted on Mar 15, 2011

  • bktm77 Mar 16, 2011

    witch way do the torque coverter bolt turn to left or right whats easy way to loosen them

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you align the torque converter to the motor of a 2000 plymouth neon 2.0L with transmission still in the vehicle without it binding?


The trick is to place the torque converter onto the gear box first and slide it back to the gear box. position the gear box against the engine housing and do up the bolts. Then through the inspection cover opening pull the converter up to the flex plate align the bolt holes ,insert the bolts and tension up

Oct 12, 2013 | 2000 Plymouth Neon

2 Answers

What is the easiest way for removing torque converter bolts


Use a breaker bar on the crank bolt to hold the crankshaft still while you take the bolts out. Have a friend help if you can or use something to hold the breaker bar against the frame or control arm so it doesn't move when you loosen the bolts.

Jun 28, 2011 | 2001 Suzuki Grand Vitara

1 Answer

Need torque specs for brake caliper bracket bolts.2000 grand prix


Hello and welcome. here is the torque specs for the bolts.

Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
Caliper Bolts
85 N·m
63 lb ft
Caliper Bracket Bolts
180 N·m
133 lb ft
caliper brake bracket bolts torque to 180 n.m or 133 ft.lbs

Jul 26, 2010 | 2000 Pontiac Grand Prix

3 Answers

How to Replace the Starter in a 1999 Pontiac Grand


starter is located on the engine block down below.

Removal & Installation To Remove:
Before servicing the vehicle, refer to the precautions in the beginning of this section.
  1. Remove or disconnect the following:
    • Negative battery cable
    • Radiator lower air deflector
    • Torque converter cover
    • Electrical connections from the starter
    • Starter motor
To Install:
  1. Install or connect the following:
    • Starter motor and torque the bolts to 32 ft. lbs. (43 Nm)
    • Starter solenoid BAT terminal
    • Starter solenoid S terminal
    • Torque converter cover and torque the bolts to 89 inch lbs. (10 Nm)
    • Radiator lower air deflector and torque the bolts to 15 ft. lbs. (20 Nm)
    • Negative battery cable
Starter removal/installation – 3.1L & 3.4L engines 9306zg15.gif

Starter removal/installation -3.8L engine 9306zg17.gif

Jul 15, 2010 | 1999 Pontiac Grand Prix

1 Answer

Head bolt torque specs


i'm guessing this is a V6 3400 since the headline is a 2000 Grand Am GT
44 LB FT plus 95 degrees

Apr 05, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Was the conveter supose to spin freely when bolted


I take it you were installing a transmission or engine that caused you to unblot the torque converter? The drive plate is bolted to the crankshaft, the torque converter is bolted to the drive plate, it should turn with the engine only. Hope this helps, let me know

Dec 10, 2009 | 1999 Plymouth Grand Voyager

1 Answer

What is the sequence for the bolts on oil pan, for 2000 dodge grand caravan? What is the torque for bolts for oil pan for 2000 dodge grand caravan?


For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Jul 12, 2009 | 2005 Dodge Caravan

1 Answer

Stiff gearchange on my 2002,1600 thanks


i have a 2000 grand vatara i had the same problem i was missing 2 bolts under the peddles. theres a plate there that they hold in place.good luck

Jul 08, 2009 | 2002 Suzuki Grand Vitara

1 Answer

Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L


the torque is a 4 step process

1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order

Jan 04, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2007 Suzuki Grand Vitara 4WD Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...