Question about 1998 Buick Park Avenue

1 Answer

How do i reset flashing low tire pressure,change oil soon after the problem is taken care of?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

To reset the tire pressure message, first make sure all pressures are appropriate, then turn the ignition on with the engine off. Press and hold the GAGES button located on the left side of the steering column until TIRE PRESSURE appears in the display. Press and hold the RESET button for 5 seconds until TIRE PRESSURE RESET appears then release the RESET button.

To reset change oil soon message, press GAGES button until OIL LIFE displays. Press and hold RESET for 5 seconds.

Posted on Mar 15, 2011

Testimonial: "Thank you so very much it worked!!"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Buick LeSabre: Check tire pressure warning is flashing, but tire pressure is OK


Have you tried resetting the light? On either the end of the dash on the drivers side or the end of the dash on the passenger side there is a panel that covers the fuse block. You'll need to have the door open to access it. Once you remove the cover you should see a button that says reset. Turn the key to the run position and press the button. The change oil message should flash, press the button again and the low tire message should flash, press and hold the button until the low tire light turns off. Sometime there will also be an audible series of beeps when it resets.

Jun 25, 2011 | Buick LeSabre Cars & Trucks

1 Answer

How to reset the oil change light?


super easy. gm did 2 things. in the fuse panel drivers door. there is a reset button. this resets for oil change light and low tire pressure. with key on hit the button, one of these light will be flashing, keep hitting it til change oil light is flashing. once it is flashing hold reset button til car dings and light stops flashing. done. if you have no reset button then turn key on press gas pedal fully down three times within three seconds of eachother light will flash and go out. good luck. these procedures are also in your owners manual.

Feb 22, 2011 | 2002 Pontiac Grand Am

2 Answers

I have a 2009 ford focus and dont know how to reset the low tire pressure light


It should go away after an hour or so from the time you get the tire fixed.

Dec 20, 2010 | Ford Focus Cars & Trucks

1 Answer

How to turn change oil light


iI you mean 'how to turn change oil light off" go to fuse panel. Open drivers door there is a panel cover on the side of dash board, remove cover there is a red RESET button that resets oil pressure and tire pressure. Turn the ignition key to the on position but don't start the car. Now press and release the reset button the change oil light should start to flash, now press and hold the reset button until you hear chimming hold until chimming stops then release, the change oil light should go off. If you need to reset tire pressure press reset button twice, the first push will make the change oil light flash the second press will make the tire pressure light flash then hold untill chimming stops, light should go out . Hope this helps.

Sep 30, 2010 | 2000 Pontiac Grand Am GT

1 Answer

I have a 2000 olds alero, how do i reset the change moil light


If you mean the change oil soon light............ Open the fuse panel; on the side of the dash by drivers door. turn on key but not far enough to start car.
Press the red reset button in the fuse panel until the oil light flashes , release the button and then press it again.
It has been a while since I have done this on an alero , so if you have your owners manual , it might be a good idea to read the instructions in there incase i have it wrong. By the way , the low tire pressure light works the same way.

Nov 08, 2009 | 2000 Audi A6

2 Answers

Overhead console warning


the air pressure in the spare tire is low add air to proper pressure and it will reset itself spare pressure low the perform service could also be for tire but check owners manual for reset service reminders or have scanned at an auto store sum,such as auto zone / advanced auto do it for free and can reset the code via scanner

Oct 21, 2009 | 2005 Jeep Liberty

2 Answers

Low tire light came on - tire pressure ok


Because of changing outside temps this happens, just hold reset button on left side of dash until it reads tire pressure 100% again, just make sure your pressure is right before you do it. this is the same for oil changes and the like.

Apr 26, 2009 | 2001 Buick LeSabre

1 Answer

Traction contol, Transmission, Tire pressers sensor


I'm fighting problem #1 right now myself... I'll let you know if I find an answer.

Anytime you get the Low Tire Pressure light you have to reset it. There is a panel on the driver's side of the dash, facing the door. So you have to have your door open to get to it.You are looking for the red button.


From the 1999 Alero manual:

"To reset(calibrate) the system, turn the ignition switch to ON. The RESET button is located inside the drivers side fuse panel. Press and release the RESET button.

The CHANGE OIL light will begin to flash. Press and release the RESET button again. The CHANGE OIL light will go off, and the LOW TIRE PRESSURE light will start flashing. When the LOW TIRE PRESSURE light is flashing, press and hold the RESET button until the chime sounds."

Apr 25, 2009 | 1999 Oldsmobile Alero

2 Answers

Reseting the Lights


To reset the low tire pressure light, take off the fuse panel located on the driver's side when you open the door it should be right there. There is a red reset button hold it for 10 secs then let go and push it again which will cause the low tire pressure light to flash, then hold the button for an additional 5 secs or until you three beeps then it will go off. The same goes for the change oil light as well. Hope this helps.

Dec 15, 2008 | 1999 Oldsmobile Alero

4 Answers

Reset tire th


It's also a good idea to reset the tire pressure sensors when you air up the tires. If I remember correctly, you click the odometer/trip meter switch until it flashes TIRE RESET (or something similar) then press the button and hold it for a few seconds. That way it sets itself to the pressure in the tires at the moment, and if it notices a pressure drop it puts up a warning.

Sep 01, 2008 | 2005 Ford Freestar

Not finding what you are looking for?
1998 Buick Park Avenue Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...