Question about 2005 Dodge Dakota
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Look in the owners manual (look up fuses in the index) or go to your local library and they should have a manual or they should have an "AllData" system.
I just don't understand why everyone wants to know where the fuses go? If you're redesigning the electrical system then great, you also need a schematics. But if you're trying to troubleshoot something that doesn't work, there may be more fuses then what the fuse panel calls out. For example: Radio - one fuse is shown for the radio when in fact there are three that affect it's operation.
This is the best way to do it. Buy a 12 volt test light. Turn on the ignition and probe both sides of the fuse. Both sides light up, it is good. If neither side lights, connect your light to the positive termanel and probe the fuse again, if both sides light up, it is controlling a ground circuit and is good. And check all the fuses in both the fuse panel under the dash and under the hood. That will tell you if you have any blown fuses. If you need help troubleshooting a particular system then let me know, but do the fuse check first.
I hope this works for you and have a nice day!
Posted on Apr 04, 2009
It seems that because the diagram for the fuse codes aren't located in the owners manual, it would be a dealer item only. One possible solution is to buy an assortment of fuses.. maybe (15) switch them out 1 by one.
Posted on Mar 26, 2009
follow the upper radiator hose to the engine, drain about 1/2 gallon of coolant and then pull upper hose off at the engine, look inside the metal large nipple, that is the thermostat.
Posted on Apr 01, 2009
To change the sparks on a 2005 4.7L Dodge Dakota you will need the following:
Note you will have to remove the air intake located at the top of the engine, and will have to move some of the coolant lines out of the way.
At the top of the engine there are 4 sparks on each side. The coils are held in place with a 10mm bolt. Undo the 10mm bolt and unclip the coil. Next pull out the coil.
Insert the socket, with extension into the spark plug hole.
Remove spark plug.
Check the gap on new spark plug, it should match stock.
tighten to approximately 25ft.lbs. (check spark-plug packaging for exact torque requirements).
repeat this process with all other sparks.
be sure that no dirt gets into the spark plug holes.
Posted on May 11, 2009
SOURCE: 2001 dodge dakota lights flicker
check for battery short inside battery have some one check for ac voltage in battery and alternator out put,,,headlight switch would be next to check or replace
Posted on Jul 03, 2009
Tips for a great answer:
Jun 09, 2015 | 2005 Dodge Dakota Quad
Jan 07, 2015 | 2005 Dodge Dakota
Oct 17, 2014 | 2005 Dodge Dakota
Oct 17, 2012 | 2005 Dodge Dakota
Jan 10, 2011 | 2005 Dodge Dakota
Sep 07, 2010 | 2005 Dodge Dakota
Mar 03, 2010 | 2005 Dodge Dakota
Aug 09, 2009 | 1997 Dodge Dakota
Nov 16, 2008 | 1997 Dodge Dakota
116 people viewed this question
Usually answered in minutes!