Question about 1999 Ford Escort

1 Answer

Need diagram for t he pvc valve - 1999 Ford Escort

Posted by on

1 Answer

All pcv valves, are in the valve cover,
and they all have a decent size rubber hose
going to them

You don't need to replace it ,ever
Spray it with brakleen

Posted on Mar 15, 2011

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 52 Answers

SOURCE: pvc valve

it is small and threads into the lower intake near the front valve cover.
if your looking at the front valve cover from in front of the vehicle you should see a small hose that goes from the right side of the cover to the lower intake. the part the hose hooks to also screws into the intake. that is your pcv valve6bf35a5.gif

Posted on Mar 25, 2009

  • 22 Answers

SOURCE: i need a diagram of a 2001 mazda tribute engine ,

Get a haynes manual they are priceless. Check out Ebay

Posted on Oct 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vacuum hose routing diagram


It goes to the Pvc system. Usually onto a valve cover

Aug 06, 2013 | 1995 Mercury Mystique

1 Answer

Diagram of 2005 ford taurus se pvc valve


diagram for plug on a 2005 se ford taurus

Sep 23, 2012 | 2004 Ford Taurus

1 Answer

Engine light lit ... pvc valve issue?


REMOVE PVC VALVE WITH VACUUM HOSE STILL ATTACHED CHECK FOR VACUUM AT PVC VALVE PLACING FINGER OVER IT.IF NO VACUUM FROM PVC VALVE BUT THE HOSE TO PVC VALVE HAS VACUUM REPLACE PVC VALVE.IF NO VACUUM GETTING THROUGH PVC HOSE AND VALVE.LOOK FOR DISCONNECTED BROKEN VACUUM HOSE OR OBSTRUCTION IN VACUUM HOSE BLOCKING OFF VACUUM.

Aug 05, 2010 | 2008 Chevrolet Suburban

1 Answer

How can I identifies the PCV valve in the motor, where is ti??? and how can I chenge it???


The pvc valve will be located on the valve cover. Or better yet will be inserted into the valve cover. Follow the hoses coming from your air cleaner ( air filter) to the one that goes to your valve cover. Your pvc valve will be at the end of the hose. pvc valve can be tested by pulling it out of the valve cover while still attached to the hose. Start the engine. Place your finger over the pvc valve and pug it with your finger. If you feel vacume then it is working properly. If no vacume is present. Replace pvc valve

Mar 25, 2010 | 2005 Jeep Liberty

3 Answers

Where is the pvc valve?


On the passanger side of the black plastic intake manifold.

May 27, 2009 | 1993 Buick Park Avenue

1 Answer

Car don,t stay on.i already gave it a tune up.


you can google that or see the valve on the intake manifold..

May 07, 2009 | Chevrolet Lumina Cars & Trucks

1 Answer

2002 saturn sl1 pcv valve


The PVC valve is located in the valve cover (top "cover" of the engine, near the oil filler cap) On DOHCs, it is immediatly to the right. On SOHCs, it a few inches to the left.The PVC valve is held to the valve cover with a rubber grommet type seat.

1. Remove the hose that connectes the throttle body unit to the PVC valve.
2. Using your hands, remove the PVC valve from the rubber seat. Wiggle it back and forth, then pull it straight out.
3. You can either clean this with carb cleaner, or simply replace it with a new one (<$5 at most auto stores)
4. Put the PVC valve back into the rubber seat and replace the hose

Apr 08, 2009 | Saturn Vue Cars & Trucks

1 Answer

I need a diagram of a 1991 buick regal 3.1 engine


are you talking about the pvc valve it is in front of the intake have to twist it to unlock it is under there take a pair of needlenose pliers to get it out

Feb 13, 2009 | 1991 Buick Regal

Not finding what you are looking for?
1999 Ford Escort Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...