Question about Mercedes-Benz C-Class

1 Answer

Rear indicator light not working uses brake light to signal. Indicator bulb checked appears ok.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 504 Answers

Bad earth at bulb holder clean bulb holder and re earth wire

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

07 Impala rear driver side brake light and turn signal does not work, but when I checked the bulb it was working just not when I press the brake. The left turn signal on the dash also blinks rapidly.


Sounds like a possible bad ground connection.
Make sure the contacts for the bulb are clean.
Make sure the cround connection is not corroded.

May 21, 2015 | 2007 Chevrolet Impala

1 Answer

Rear light indicator on dash is on even though all lights and turn signals work properly.


Hello, the lights may all appear to be working but if one or more bulbs have too much resistance the light may stay on, first check all bulbs especially the middle brake light, any bulbs that are discolored or look smoky should be replaced, if the bulbs are not the problem check the tail light failure relay in the trunk on the left side under the carpet near the fender, these are known to burn out, maybe replacing it will solve the problem.

Jul 09, 2014 | 1999 Toyota Camry

1 Answer

Rear Turn signal is not working


Aren't your brake lights and turn signal lights on the same bulb, same filament? Recheck the bulb in the rear, as the rapid blinking is an indication of a burnt out bulb. If the bulb is the correct one and is good, check the connector and socket at the housing for a loose or poor connection.

May 26, 2012 | Dodge Durango Cars & Trucks

1 Answer

No brake lights (bulb works when lights are on), no rear turn indicator lights(front turn indicators are working and rear bulbs do not appear to be blown)


The first thing i would check is the stop safety switch located under the brake pedal or brake pedal arm. If this piese has failed there will be no current to the brake lights when you apply the brakes

Jun 13, 2011 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

Left turn indicator comes on dimly with application of brakes. No bulbs out.


Lots of possibilities, but the most common is a bad ground of the entire light assembly on the left rear.
That makes the left rear brake filament ground back up through the left rear turn signal ground, through the left rear signal filament, and all the way back up to the dash left indicator light, then finally to chassis ground. Just check if the left brake and left signal are both dim and come on together.

Sep 16, 2010 | 2006 Ford Escape

1 Answer

Drivers side brake light and horn won't work,,is it the multi function switch? 1999 chev blazer 4x4 . if so how much does a new one cost?


No there not connected, replace the brake light
1999 Chevrolet Blazer Auto Light Bulb Size Guide
Low Beam Headlight Bulb Size: 9006
High Beam Headlamp Light Bulb Size: 9005
Parking Light Bulb Size: 3157
Front Turn Signal Light Bulb Size: 3157
Rear Turn Signal Light Bulb Size: 3057
Tail Light Bulb Size: 3057
Stop Light Bulb Size: 3057
High Mount Stop Light Bulb Size: Assembly
Fog/Driving Light Bulb Size: 880 or 881
License Plate Light Bulb Size: 194
Back Up Light Bulb Size: 3156
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 161
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168 or 211-2
Step/Courtesy Light Bulb Size: 168 or 211-2
Trunk/Cargo Area Light Bulb Size: 211-2
Under Hood Light Bulb Size: 93
Instrument-General Light Bulb Size: 161 or 37 or PC194 or PC74
Check Engine Indicator Light Bulb Size: PC74
Hi-Beam Indicator Light Bulb Size: PC74
Seat Belt Indicator Light Bulb Size: PC194
Brake Warning Light Bulb Size: PC74
Automatic Transmission Indicator Light Bulb Size: 194
Directional Signal Indicator Light Bulb Size: PC74
As for the horn, inspect the fuse and relay and most common it would be a bad ground wire or worst a bad horn due to corrosion. Horn will be located in the drivers side fender.
Thank you for using fixya.

May 13, 2010 | 1999 Chevrolet Blazer

1 Answer

Brake light wiring reversed?


hi go back to bulb and make sure the bulb you have fitted is for indicator? this has only one element and has only one centre contact for power also check the side pins on the body of bulb they should be opposite one another and on same level as you look on side however here in uk some of these bulbs are the same as above but for the locating pins as described above the pins are on same level but not opposite each other so if you try fitting should not be able to fit easily bayonet suggest you check the other side rear light bulbs one at atime to ensure correct type are what you have fitted stop and tail light bulbs have two elements one for brake and one for tail light these locating pins are oposite each other but not on same level offset to ensure the elements are on correct circuit when fitted hope you understand ?

Nov 02, 2008 | 1995 Ford Contour

2 Answers

1991 volvo tail lights


Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Oct 20, 2008 | 1991 Volvo 240

2 Answers

Signal and brake lights


Igot the same problem on left side.The problem was the convertor for the trailler plug.

Jul 16, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...