Question about 2008 Ford F 250 Super Duty 4WD

Open Question

My 05 f450 has no hazard lights,turn signal or brake lights? checked all fuses and replaced multi function switch with no luck. HELP

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 375 Answers

SOURCE: 1998 gmc sierra brake lights

did u check that they not burn?if not you should Check the wires going into the steering column if you don't have separate turn signal lights and brake lights because if they use the same bulb then the turn signal may be bad. If I remember correctly that particular car doesn't work this way, but I include it just in case.

Posted on Jun 29, 2008

Ad
satanchild30
  • 8 Answers

SOURCE: no brake lights or turn signals on 2008 F450

try checking all of your fuses and see which ones are blown. you have two sets of fuses and they are under the hood of the vehicle and under the dash on the driverside or in the glove box. if the don't work after changing the fuses then your wiring for the turn signals and brake lights need to be cheked from the fuse boxes to the swith for the trurn signal and to your brake lights

Posted on Mar 24, 2009

csmock132
  • 4669 Answers

SOURCE: No Brake Lights, unable to switch from park to drive

It is not the multifunction switch. The power feed goes thru the brake switch before the multi function. You have no power the the brake switch because your shift interlock is not allowing you to shift it. I'll look up the wiring diagram and repost with a solution.

Posted on Apr 25, 2009

joecoolvette
  • 5660 Answers

SOURCE: no brake/hazard lights,have running/turn signal lights

Suggest you change hazard flasher 'can' first, then go to the hazard switch. I'm betting it's the flasher can.

Posted on May 11, 2009

  • 15 Answers

SOURCE: No turn signals, hazards or brake lights

replace the turn signal switch in the steering column

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace multi-function switch 2005 mariner


The tail light is usually a bulb with lower wattage, so it won't glow as brightly as the brake and turn lights.. There should be one or two other bulbs in either of the two tail assy's. The turn signal can use the same bulb as the brake light. If so, it's up to the flasher assy to direct the lights to both come on, and/or for one to flash if the brake and turn signal is on, e.g.. There could also be a backup light.

So if the brake and turn lights don't operate, look to the fuses, and flasher assy. for possible replacement.

Jun 01, 2015 | 2005 Mercury Mariner Premier

1 Answer

2001 PT Cruiser loss of turn signals and hazard lights after multi-function switch replacement. I replaced the multi-function switch after noticing the fogs lights staying on when not engaged. When the new...


Perhaps you need to start with fog light problem I am guessing we do not know for sure the switch was the cause, if you can remove them from the equation. When checking for shorts make sure you check light bulbs to,
Next, since the multi function switch was the next step in your problem solving, I suggest you remove the new switch check out all wires to the connector, be especially careful to make sure none of wires have pulled out or partially pulled out of the connector. Let me know when you finish this then we can move on to continuity testing.
My best guess is the connector as it is common to both your fog light and multi-function switch,
Above all don't let it get to you, these problems can be frustrating but they also can be interesting and fun especially with the right assistant

Aug 25, 2013 | 2001 Chrysler PT Cruiser

1 Answer

Turn signals and brake lights will not work


A mechanic would check for voltage at the multi-function switch in the column. Those three circuits go thru the turn signal switch.

Jul 13, 2012 | 2002 Buick Rendezvous

1 Answer

97 Olds Bravada My brake & hazard lights don't


There are TSB's for this issue. I chased this issue for months on mine. Go find the TSB's, there's troubleshooting pointing out the faulty part. It could be, the brake light switch, the hazzard light switch itself, the multi-function switch. I had replaced all of these and still had the problem. Wiring that goes from the brake switch to up near the fender was shorting against the fender. I replaced the pigtail, problem fixed. Best bet to help you, is find the TSB's for this problem.

Jun 28, 2017 | 1997 Oldsmobile Bravada

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

1 Answer

1998 Lincoln TC no brake or hazard lights work.


Hazard light switch... They all intermingle in operation.
My ex wifes 96TC was doing the same thing... I could OCCASIONALLY get the hazards to work by turning the hazard switch on/off like 10 times in a row and suddenly it would fix... finally bought a new switch

Sep 14, 2009 | 1999 Lincoln Town Car

1 Answer

My hazard lights and turn signals stopped flashing


i bet you have a bad multi function switch or turn sig switch. good luck

Oct 25, 2008 | 2006 Dodge Ram 1500

3 Answers

2000 gmc jimmy brake lights


I had the same problem with my 2001. I found it was the multi function switch. Better known as your turn signal switch. I found that the hazard switch portion of it had shorted. replacement is fairly easy, aftermarket part is available, much cheaper than GM.

Jul 15, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...