Question about 2008 Chevrolet Cobalt

Open Question

Why isn't my speedometer working in my 2008 chevy cobalt

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: I need to remove the front headrest of a 2008 chevy cobalt lt

Push the button and pull up on it at the same time

Posted on May 25, 2009

Ad
  • 396 Answers

SOURCE: Chevy Cobalt LT - Sound System help

big red
the only way you can damage your alternator is to not properly ground your amplifier get a bigger battery a optima deepcycle (Yellow one) battery will help so you can use it with out turning your vehicle on.

Posted on Oct 23, 2009

Cycoman
  • 81 Answers

SOURCE: Key won't turn in 2008 Chevy Cobalt. Tried moving

now what it sounds like is the key has a sensor built in it the keys cost around 60.00$ but this is most likely what is wrong. the sensor is a security feature with the car if the light glows while trying to turn the car then this your problem :)

Posted on Mar 23, 2010

ejkudelka
  • 1188 Answers

SOURCE: I have chevy inpala 2008 rear defrost isn't

The problem is probably that a fuse has blown and it needs a new one. You can look in the car manual to find where the fuse box is in your car. You can then change the fuse yourself or bring it to your service station. You can buy replacement fuses or have them change it for you.

Good luck!!
EJ

Posted on Nov 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are all the ground wires located on a 2008 chevy cobalt?


It wouldn't be a ground problem If it were the whole instrument cluster would be dead . Checking the BCM an the IPC for DTC'S - diagnostic trouble codes is the proper way to diagnose this type problem . Not worrying about grounds .
Odometer
The vehicle odometer is calculated and stored electronically in the body control module (BCM) and is sent via the serial data circuit to the instrument panel cluster (IPC) for display. The BCM calculates and stores the mileage based on the vehicle speed serial data information from the PCM/ECM. The IPC displays the season odometer information from the BCM in the driver information center (DIC). The odometer will display error if the IPC detects an invalid odometer data from the BCM. After an invalid odometer data is received from the BCM, the IPC will display the last known odometer reading for 1.5 seconds before error is displayed in the DIC.
Speedometer
The instrument panel cluster (IPC) displays the vehicle speed based on serial data message from the body control module (BCM). The BCM receives vehicle speed data from the PCM/ECM via the serial data circuit. The speedometer will default to 0 km/h (0 mph) if:
• The PCM/ECM detects a malfunction in the vehicle speed sensor circuit.
• The BCM detects a loss of serial data communications with the PCM/ECM.
• The IPC detects a loss of serial data communications with the BCM.

Your best bet would be to take it to the dealer !

Apr 19, 2017 | 2008 Chevrolet Cobalt

1 Answer

Chevy prizm speedometer isn't working what should


what year?
first (of older cars) check that the speedometer cables spins when
you spin the rear axle.(and prop shaft)
post year, for best answer.

Apr 21, 2013 | Cars & Trucks

1 Answer

Service traction light came on & my chevy cobalt 2008 won't start.


traction control will not cause starting issues read check engine light or security

Mar 15, 2013 | Cars & Trucks

1 Answer

2008 chevy cobalt engine light on


Your Po449 code means: Evaporative Emission (EVAP) Vent Solenoid Control Circuit. Check to see if anything on you EVAP system has gotten disconnected and make sure that none of your hoses have gotten old and bridle or have holes. If everything looks ok, you probably have to replaced the Vent Solenoid Valve, which is located on the EVAP canister.

Jan 30, 2013 | 2008 Chevrolet Cobalt

1 Answer

Where is the air bag module ona 2008 chevy cobalt located?


Underneath the carpet under the center counsole

Oct 14, 2012 | 2008 Chevrolet Cobalt LS

2 Answers

IGNITION WON'T TURN ON MY 2008 CHEVY COBALT


need more info on what you have tried already

Nov 21, 2010 | 2008 Chevrolet Cobalt

1 Answer

Faulty chevy cobalt ignition


put a drop of engine oil down the barrel and work the key up and down a couple of times

Jun 22, 2009 | 2008 Chevrolet Cobalt

1 Answer

I need to remove the front headrest of a 2008 chevy cobalt lt


Push the button and pull up on it at the same time

Apr 04, 2009 | 2008 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...