Question about 1981 Chevrolet Corvette

1 Answer

1981 Corvette my brakes work fine but my brake light stays on my instrument panel

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have to bleed system

Posted on Jul 23, 2011

  • sparkofintel
    sparkofintel Mar 29, 2012

    The brake light is only attached to the e-brake, not the brake system. There's a switch under the pedal that controls the light via the e-brake itself, chances are it needs replaced.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1981 corvette stingray the brake light has come on and stays on.The oil is ok as is the brake pads are good would it be the booster?


could be a bad brake light switch which is mounted near the brake pedal under the dash try adjusting the plunger which contacts the pedal maybe its on going in far enough otherwise replace the brake light switch

May 16, 2011 | 1981 Chevrolet Corvette

1 Answer

1977 Ford F-100 Lights fliker when light switch is turned on, no brake lights. With switch of blinkers and brake lights work fine. with switch on clicking and instrument lights fliker.


does this vehicle have headlight dimmer swith on the floor.if so make sure that it has a good dround
test this switch
if this is not problem replace light switch

Dec 16, 2010 | 1981 Ford F 100

1 Answer

The 'BRAKE' light in the dash of my 1981 Corvette turned on so I added some brake fluid to the master cylinder but the light Still is on. The emergency brake never worked while I've had it but that's not...


The light comes on to to let you know there is low pressure in the system. If the fluid was extremely low when you filled it the brake linings are extremely worn or you have leak in the system. I would check under the car for any signs of moisture around the brake lines. If your brake linings are good and no leaks can be found you will need to replace the master cylinder. Good luck

Sep 13, 2010 | 1981 Chevrolet Corvette

1 Answer

Brake lights stay on 2001 chevy s 10


There is a brake light swich along the brake peddle that need's to be adjusted. Quick and easy fix.

Apr 06, 2009 | 2001 Chevrolet S-10

1 Answer

Instument panel lights & tailights won't come on with headlights


Hello,   check the fuse in the fuse panel labeled PARK this may be it. 
...and also, just a question here, Have you recently had a radio or alarm installed?

Jan 21, 2009 | 1999 Chevrolet Corvette

1 Answer

How do I replace the brake power booster on a 1981 corvette


you will have to remove the master cyl no need to dissconnect the lines and dissconnect the vacuume line and from inside the car under the dash dissconnect the brake pedal from the shaft running to the booster. and remove the 4 mounting bolts that hold the booster to the firewall and pull foward in the engine compartment.
as long as you dont dissconect the brake lines you wont need to bleed the brakes.
good luck
paul

Sep 28, 2008 | 1981 Chevrolet Corvette

1 Answer

Battery light stays on


Many possibilities but the alternator is a good place to start, if its plug is loose, then the green relay inside the center console just to the left and slightly in front of the emergency brake will be clicking in connecting and disconnecting the battery( one loud click per time). It will need replacing or simply disconnecting works for the short budget.

Aug 04, 2008 | 1981 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...