Question about 2000 Oldsmobile Intrigue

1 Answer

Wiper blade will only move about half an inch up on the right side. driver's side works fine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 784 Answers

Man's hand coming from the engine is worn out munak rod attachment and then have it come off the rod. Where can it also be possible that the janitor is attached to the actuator rod has come loose. Moving a man's hands, whether it is moving too?

Posted on Mar 15, 2011

  • 1 more comment 
  • Diether Masing
    Diether Masing Mar 15, 2011

    either by moving the hand moves to the full length or only a few inches?

  • mepler1 Mar 15, 2011

    the rod coming out of the engine spins, but the wiper arm does not always move no matter how much I tighten the bolt. it looks as if the rod is worn/stripped.

  • Diether Masing
    Diether Masing Mar 15, 2011

    This acknowledgment must be replaced. If I'm not mistaken they are the connection between the knot connection. Get rid and control.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiper blades move real slow in the 1st & 2nd position


wiper blade on driver should be 22 inches and the passenger side wiper blade should be shorter make your wiper blades is what factory call for if too long they will move slow hang up.

May 23, 2013 | 2006 Opel Meriva 1.7

1 Answer

1999 Cadillac Deville wiper blade on driver side not moving


bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken parts.

Feb 09, 2013 | 1999 Cadillac DeVille

1 Answer

My car window wiper is hitting off the side but it is the right size and isn't loose?


has been moved or the one fitted is bigger that the one it was originally set to. take the cap off the wiper arm and undo the nut. then wiggle the wiper blade arm until it comes off. then put back on and leave an inch gap from bottom off the window to the wiper. tighten the nut up and check that it works ok without going over any of the rubbers on the winds screen. if it does re do it and lift it a bit more up. then it should be fine after driving over 30mph then.

Jan 05, 2013 | Vauxhall Cars & Trucks

1 Answer

How do I change wiper blades 2001 Chevy blazer


Open the cap at the end of the windshield wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage.
Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4pJlPaV
  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

  • 2 Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as you will reuse it later.
  • 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it slightly. It's a keyed gear, so it may take a little bit of workunderlined.png?1 to break it free, but with the right amount of wiggling, it will disengage.

  • Read more: How to Remove Chevy Blazer Windshield Wipers ' eHow.com http://www.ehow.com/how_6177302_remove-chevy-blazer-windshield-wipers.html#ixzz1B4p1UYyB

    Jan 15, 2011 | 2001 Chevrolet Blazer

    1 Answer

    What size are my wiper blades on my 1998 olds cutlass supreme


    Hello tomkamy1: My name is Roger and I will answer your question. The passenger side takes a 19 inch wiper blade. The drivers side blade would be a 22 inch wiper blade. Should you need further help please just ask Please rate the answer. Thank You for using Fix Ya. Roger

    Dec 18, 2010 | 1998 Oldsmobile Cutlass

    1 Answer

    2005 tahoe wiper replacement


    My tahoe has a plastic piece just to the left of the metal attaching arm. It is easiest to see on the driver side wiper. There is just enough room to slip a flat blade screw driver into and then pop upwards. After this clip is popped, slowly move the wiper blade to the right as you pull that clip further upward. The blade can now be removed. Of course if you have a different type blade this will not work.

    Dec 14, 2009 | 2006 Chevrolet Tahoe

    1 Answer

    The wiper blade on driver's side has always made a viberateing no


    Try swapping the arm and blade assembly from left to right to see if the condition follows.

    Oct 30, 2009 | 2002 Honda Odyssey

    1 Answer

    Driver side wiper blade doesn't sync with passenger side blade


    the wiper arm assembly is stripped for the knurled knob that is sits on.  replace the wiper arm with a new one.

    Mar 30, 2009 | 1995 Geo Prizm

    2 Answers

    2005 Chevy Equinox Wiper blade hits edge of window


    The 23 should work on the drivers side but you will need a 19" on the passenger side.
    Hope this helps and let me know.
    Regards,

    Feb 18, 2009 | 2005 Chevrolet Equinox

    2 Answers

    Driver side wiper arm moves only a little


    take the cap off the end of the wiper arm and tighten the nut

    Dec 18, 2008 | 2001 Dodge Caravan

    Not finding what you are looking for?
    2000 Oldsmobile Intrigue Logo

    Related Topics:

    58 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    75817 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8180 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...