Question about 1999 Chrysler 300M

1 Answer

Installing rear speakers for 300m chrysler

I notice that there is a black felt cover that is covering the rear speakers. Do I remove the cover.... and also I notice that there is two silver clipps that is also holding the black felt, right behind the rear seat.... Need help installing two rear speakers.....help!!

Posted by on

  • Anonymous Mar 21, 2014

    How to remove front seats and backs to change covers

×

1 Answer

You have to remove the backseat, the back upper sidepillar trim and then the cover over the speakers.

Posted on Oct 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove steering column cover 300m chrysler 1999


Hi Trevor, I'm glad to help!

The Steering Column Cover is held by 3 screws mounted upward and you reach them through the access holes from under the column. Some are Phillip's head screws and some are torx screws. Once the screws are out remove the top cover first, then the under cover next. Hope this helps and have an awesome day Trevor.

Mar 02, 2013 | 1999 Chrysler 300M

1 Answer

How to remove rear struts on 2001 chrysler 300m


written and video instructions here plus where to buy.

  • how to change rear struts on 300m - JustAnswer www.justanswer.com/chrysler/3p878-change-rear-struts-300m.html ... how to change rear struts on 300m ... I am trying to change the rear struts on my Chrysler 300m. I started by trying to remove ... Traffic on JustAnswer ...
  • Strut Removal - YouTube www.youtube.com/watch?v=dvLZkqLyKoY
    • BY RAPTORV268
    • 10 MIN
    • 15K VIEWS
    2009-06-29 · Video embedded · Rear Strut Removal And ... Replacing Front Struts [2000 Chrysler 300M ... How To Install Replace Rear Shocks Struts 2001-06 Chrysler ...
  • 2001 Chrysler 300M - Rear Suspension ' Mopar www.mopar.com/chrysler/300m/2001/shop/6020/47/3916 2001 Chrysler 300M. ... HANGER Rear Suspension Pivot ... Charger, Chrysler 200, Compass, Dart, Durango, Grand Caravan, Grand Cherokee, HEMI, ...
  • Shock and Strut Mount for 2001 Chrysler 300M www.autopartswarehouse.com > ... > 300M > Shock and Strut Mount We have the Largest Selection of Shock and Strut Mount for your 2001 Chrysler 300M. ... Rear (6) Front (7) Front ... Shock and Strut Mount for 2001 Chrysler 300M
  • how do I replace rear struts on 99 300M, specifically how www.justanswer.com/car/1j2x3-replace-rear-struts-99-300m... ... how do I replace rear struts on ... Find the answer to this and other Car questions on JustAnswer. Login'Contact ... 5.Remove the rear parcel shelf trim ...
  • Chrysler 300M Shock Absorber And Strut Assembly - Free ... www.autopartswarehouse.com > ... > Chrysler Thinking of buying a new Chrysler 300M Shock Absorber and Strut Assembly? ... Chrysler 300M parts under Shocks, Struts ... Chrysler 300M Shock Absorber and ...

  • Mar 16, 2012 | Chrysler 300M Cars & Trucks

    2 Answers

    I need to remove the fans in a 1999 chrysler 300m?


    If what you meant is the radiator cooling fans then the front mounting must be removed to access and replace. The radiator must be drained, the hose connection must be removed, you need access from below the car as it must be jacked up . Removal of the front end with good care is also needed.

    Sep 30, 2011 | 1999 Chrysler 300M

    1 Answer

    Jack placement on a 2002 chrysler 300m to fix a flat tire


    Typically on Chrysler the lift point for the front tires is located just behind the wheel and for the rear just in front of the wheel. When you remove the cover that is over the spare tire there should be a diagram showing these. The User Manual will also designate these. These all assume you are using the original issued jack.

    Jul 11, 2010 | 2002 Chrysler 300M

    1 Answer

    How to replace a headlight bulb in chrysler 300


    you will need to unbolt bumper cover and pull out on side light is being replaced, doesnt have to come of completely but needs to pull back to get light out,remove the bolts from the top hold light asm, in, then remove top cross plate that holds hood latch and put to the side, then remove bolts and clips holding bumper cover and pull cover foward until you have room to pull light out, then remove the bulb from the rear,this bulbs are 90 degree plug type not the straight one, they dont fit, hope this helps, not bad to do, just sounds so.

    Jun 09, 2010 | 2000 Chrysler 300M

    1 Answer

    Radio system not working, where is fuse 1999 Chrysler 300M


    open driver door at end of dash ther is a removeable cover fuses are in it radio fuse should be marked in cover its placement

    Mar 23, 2010 | 1999 Chrysler 300M

    2 Answers

    2004 chrysler 300m 3.5L waterpump location and does it run off the timing belt/chain


    Yes the water pump does run of the timing belt system.
    Directly from the service manual:

    The 3.5L water pump has a die cast aluminum
    housing and a plastic swept vane impeller. It bolts
    directly to the right rear timing belt cover using an
    O-ring for sealing. The water pump is
    driven by the engine timing belt.

    REMOVAL
    The water pump on all models can be replaced
    without discharging the air conditioning system.
    WARNING: DO NOT REMOVE PRESSURE CAP
    WITH THE SYSTEM HOT AND UNDER PRESSURE
    BECAUSE SERIOUS BURNS FROM COOLANT CAN
    OCCUR.

    NOTE: It is normal for the water pump to weep a
    small amount of coolant from the weep hole (black
    stain on water pump body). Do not replace the
    water pump if this condition exists. Replace the
    water pump if a heavy deposit or a steady flow of
    engine coolant is evident on water pump body from
    the weep hole (shaft seal failure). Be sure to perform
    a thorough analysis before replacing water
    pump.

    (1) Drain cooling system (Refer to 7 - COOLING -
    STANDARD PROCEDURE).

    (2) Remove accessory drive belts (Refer to 7 -
    COOLING/ACCESSORY DRIVE/DRIVE BELTS -
    REMOVAL).

    NOTE: The water pump is driven by the timing belt.

    (3) Remove engine timing belt (Refer to 9 -
    ENGINE/VALVE TIMING/TIMING BELT AND
    SPROCKETS - REMOVAL).

    (4) Remove water pump mounting bolts (Fig. 31).
    Note position of longer bolt for proper re-installation.

    (5) Remove water pump body from engine

    Here is link to get a factory service manual relatively cheap.
    2004 Chrysler 300M Service Manual Covers every serviceable part.

    Sep 23, 2009 | 1999 Chrysler 300M

    1 Answer

    Headlamp bulbs for exchange chrysler 300M -00


    If you're just changing the bulbs, then all you need to do is reach behind the top cover and then remove the cover off the back of the headlamp assembly

    Sep 08, 2009 | 2000 Chrysler 300M

    1 Answer

    Location of the oilpan and filter of my 1999 Chrysler 300M


    there is a large plastic cover/shield under the car, remove it and the filter and oil pan are right there, the filter is in the front.

    Dec 04, 2008 | 1999 Chrysler 300M

    1 Answer

    OIL IN SPARKPLUG TUBE


    Sounds like one of two things. One is it has had oil spilled while adding oil and it has ran down into the chamber by gravity. The other is a leaking valve cover gasket.

    Nov 06, 2008 | 2002 Chrysler 300M

    Not finding what you are looking for?
    1999 Chrysler 300M Logo

    Related Topics:

    1,385 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    yadayada
    yadayada

    Level 3 Expert

    60960 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    chargerhp
    chargerhp

    Level 3 Expert

    813 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...