Question about Hyundai Azera

1 Answer

Directions on changing wiper motor. try wipers and hear motor run but wipers do not move. thx, chris

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

The wiper transmission has came off the motor. Very simple fix, just remove the wiper cowl, which is the plast vent covering the bottom of the windshield where the wiper arms are. hope this helps

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The wiper motor runs, but the wipers wont work.


Can you move the wipers by pulling on them? If you can and they easily move, the wiper linkage is disconnected. If you can hear the motor run and the wipers are inoperable, suspect a seized wiper pivot

Oct 25, 2015 | 2000 Buick Century

2 Answers

Rear wiper stopped but can hear motor working, also hear motor when ignition is turned on


the inside of the wiper could be stripped out and have no tension to move the wiper try pulling it off and changing it if not need to see how to take it of and maybe the motor could have stripped the gears inside itself.

Mar 26, 2013 | 2006 Land Rover Range Rover

3 Answers

My windshield wipers wont work.


It Sounds Like, Either The Arms Are Loose ,If You Can Hear Something Moving Behind The Dash,
Or The Linkages Are Seized ,If The Motor Just Hums No Movement Heard,In Which Case Try Spraying Q 20 On The Linkage And Try Moving The Wiper Arms By Hand To Get It Going Again,
If Not The Motor May Just Be Burn;t Out.

Mar 16, 2013 | Cars & Trucks

1 Answer

Windscreen wipers on my renault clio have stopped working i can hear motor when i turn them on but wipers do not move


If you can hear the wiper motor running but have no wiper movement, it is quite likely the linkage has failed. It will be necessary to gain access to the wiper motor to determine what repairs are necesary

Jan 28, 2013 | 2007 Renault Clio 1.2

1 Answer

MAZDA323 FAULTY WIPERS


Check the wiper arms are properly connected to the mechanism,that protrudes from the actual motor...these normaly have a tooth like system and therefor if the wiper arms are not connected properly then the wiper motor will run but the wipers wont move.....also check the wiper cross arm mechanism(located under the bonnet)as these are normaly on a push fit ball and could be worn and disengaged.

Jan 17, 2013 | Cars & Trucks

1 Answer

Windsheild wiper wont move


Check to see if the nut is tight on the wiper down at the bottom, secondly turn the wipers on and put your ear down by the wipers to see if you can hear the motor moving. If you hear the motor moving the arms under the plastic sheathing have seperated. Try the nut first see if that fixes your problem then try the rest.

Jul 13, 2012 | 2007 Mitsubishi Endeavor

2 Answers

97 jimmy wiper motor relay fuse problem hear motor running and wipers don't go. fuse or motor?


if u hear motor not elect problem -most likely linkage unbolted from motor with motor running try to move the wiper arms if move freely than need to remove cowl and check the linkage hook up to motor -if wipers dont move freely than possible motor damage/seized linkage damaged but still would have to look under cowl at connection at linkage

Jun 10, 2010 | 1997 GMC Jimmy

3 Answers

Pontiac g6 2006 wipers stopped movement while driving. what could this be from? I already checked fuses. i hear the motor running making noise.


either linkage broke/ jammed or motor is stuck -makin noise but not movin open hood and with wiper on feel motor- its on firewall-for movement if moving turn off motor now try to move wipers if move freely than they are broken off or have disconnected from the motor need to remove the cowl to access the wipers linkages

Mar 13, 2010 | 2006 Pontiac G6

1 Answer

My wiper blades are not moving


If indeed you can hear the wiper motor running but the wipers are not moving, there is a nut under the pivot point cap that has to be tightened. If you don't hear the motor running than you'll have to check the power to the wiper motor and the fuses. Good luck. Dana

Jan 06, 2010 | 2004 Chevrolet Impala

1 Answer

2000 taurus hear motor but arms dont move. i can


it sounds like the wiper transmission has broken/slipped off of the wiper motor. Remove wiper motor and check wiper transmission.

Dec 26, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...