Question about 1992 Plymouth Voyager

1 Answer

Do i ck the tranny fluid level with motor running or off? and what type of transmisson fluid does it take?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Plymouth Master
  • 1,249 Answers

To get an accurate level reading, the Van should be running, and motor warm...If it has been sitting without driving...with your foot on the brake...shift between forward and reverse gears a few times...The Lucas Oil Tranny Stabilizer works wonders on older can be added without draining any fluid. If you decide to top off with tranny fluid the brand labels at your parts store...each brand should specify the "make of car" it is designed for. Hope this helps.

Posted on Mar 15, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

95 Tracker 1st to 2nd shift issue (automatic)

Would start by checking linkage or the cable that runs to tranny. Tranny fluid level is correct? Check fluid level first. Run 15-20 mins and check with motor warmed and running

Apr 24, 2014 | 1995 Geo Tracker

1 Answer

Shifting hesitation automatic transmission

transmission fluid may be low, ck the level while vehicle is running, if not low, my guess is its about trashed, also make sure it doesnt smell burnt, if it does, get a tranny flush and replace the filter

Apr 10, 2013 | 2005 Honda Civic

1 Answer

How to ck transmisson fluid level 6 cyl 2000 Aleo

Looking down on the engine on the right hand side you will see the dip stick that goes to the transmission. Pull it. You should be checking it with the engine running, hot and in park.

Feb 06, 2011 | 2000 Oldsmobile Alero

1 Answer

How many quarts of tranny fluid to fill this transmisson

it usaullt tkaes any where from 5-6 qts. the best way is to take your time by starting with 4 qts and starting the car. with it running check the level(it will look very high but one side of the dip stick will be lower than the other side. use that to measure off of.) Add fluid till it reads on the cold level on the dipstick and make sure to move the shifter though out all the gears. Let the car warm up for at least 10-15 minute to bring the fluid level all the way up to be sure it is at the right level.

Nov 19, 2010 | 1995 Buick Park Avenue

2 Answers

My 2000 concorde runs great when cold then tranny slips when hot. . . . . ?

Fluid level ok? Check it when hot and car running.

Have you had the tranny serviced recently?

This type of tranny uses the Dextron +4 fluid, any other fluid would mess up the transmission.

I have a 1999 Intrepid, no problem w tranny, but a month ago I put an aditive that a friend recomended. After only about 5 miles I felt the car more responsive and with more power. I also think my gas mileage improved.

I got it at AutoZone the brand is RISLONE Transmission Stop Slip with Leak Repair
it says works with all types of fluids.

I hope this will help. Good luck

Mar 02, 2010 | 2000 Chrysler Concorde

2 Answers

Overdrive light comes on and wont go off till you turn off motor

I had that same problem a few months ago. I didn't really think anything of it because my car still drove the same and I didn't know it could turn into a big problem. A year ago I had my transmission rebuilt on my cherokee then this year a few weeks after that little light started having problems, my car just stopped moving. I had it towed back to the shop and they needed to replace a bad part on my transmission again. So if you've previously had problems with your transmission I would suggest getting that checked out so you don't get stuck on the side of the road for 4 hours like I did. Sorry if this doesn't help, I'm not exactly a car expert I just have lots of problems with mine.

Jul 23, 2009 | 1996 Jeep Grand Cherokee

1 Answer


possible use of the wrong fluid type or improper level. also when a transmission wears the material gets into the oil making it thicker which increases the pressure which compensates for the wear.
if the first isn't true the second is. it may relearn and adapt.

Jun 25, 2009 | 2001 Dodge Caravan

1 Answer

1998 Ford Expedition transmisson

sorry to tell you i dont think its a sensor. but i think the transmission will need a rebuild. write me a mesg and let me know how many miles it has on it and also smell the tranny fluid and see if it has a pundgent smell

Jun 09, 2009 | 1998 Ford Expedition

1 Answer


Chryslers need clean transmisson fuild and the right type of fuild. I would check the transmisson fuild level and top up if needed. If the fuild looks old and dirty have the transmisson serviced witha fuild and filter change - 50-100 buck could save you big $$$ on a trans job later

Nov 20, 2008 | 2001 Chrysler Sebring

Not finding what you are looking for?
1992 Plymouth Voyager Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides