Question about Ford F-350

1 Answer

I have a 1988 F350 460 CID Auto. The engine light comes on. Then it starts to miss fire and stalling. It runs ok on fast idle and full throttle no problem.Ernie

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 158 Answers

It could be a vaccuum leak, mapp sensor, maf sensor, oxygen sensor and many numerous other things. If the engine light is coming on you should be able to retreive the error codes that are stored in the computer.

Refer here to read your codes http://www.fordfuelinjection.com/?p=13 then continue down on this page and you can see what the codes mean.

if this helped please leave a good rating.

thanks and good luck

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1993 cavalier engine stalls.


Start checking and eventually replacing air filter, spark plugs, and fuel filter, check that air intake is not obstructed.


Oct 12, 2008 | 1993 Chevrolet Cavalier

2 Answers

Engine switching off when you engage into drive, break, or switch on lights


engine stalls with any added load, even DRIVE ,
you have engine issues, if it stalls, for any reason.

stalls are complex. (like juggling bowling pins.)
the ECU tries very hard to stop all stalls, and failed
that means the engine power is very very weak.
(misfiring or fuel starvation)

ever give it a full 60k mile tune up this decade? bingo?
(we have a list of 50 causes) forget that
we have 5 tests. that work. (and good fresh fuel)

ill list just 1
key on, is CEL lamp (engine check light) is on?
you start engine, does the lamp go out.? same lamp.
i'd bet not. bingo? that means scan it , with any scan tool.
then post the DTC errors.

in USA some auto stores let you barrow one, Axxx-zoned.

ok 2: check all fuses. really that is #1,....
1: all fuses, both boxes. checked good.
3: tuneup (a full 60k) the one never to miss.
3: CEL indications running.



Jan 14, 2014 | 1998 Toyota Caldina G

1 Answer

96 Jaguar XJ6 starts fine, idles at 800 in neutral 700 in gear, at times it gets a bit rough and stalls sometimes, restarts right away with no issues. Will not rev over 2700 rpm in neutral it just bogs. In...


the crank sensor is favorite they are unreliable that explaines why the trans not getting engine speed signal unless its a manual box and that code will allways be logged advise start by checking for water ingress in engine control module located lower rh a post then change crankshaft position sensor or better still try and borrow one from a good running car

Mar 02, 2017 | 1995 Jaguar XJ6

1 Answer

Backfiring and constant miss firing, engine not running smoothly during idling and loud miss firing sound at exhaust at full throttle opening.


You have a timing problem. Check for loose/broken belts. also see if the distributer cap is worn out or cracked. Replace it if it looks worn out. Change spark plugs....
Sounds like a typical ignition problem. If your handy, you can do this all yourself.
Change plugs wires and distruber cap.

Mar 09, 2011 | 1988 Daihatsu Charade

1 Answer

Dies when i stop


Here are the common cause of surges, cold stalls, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours.
To correct this problem I want you to get a can of intake cleaner (ABOUT $5.00) from any local auto parts store like NAPA or Carquest, do not use carburetor spray, intake cleaner only or u will damage the Teflon coating inside the throttle valve and air bypass valve, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

Sep 12, 2010 | 1988 Plymouth Reliant

1 Answer

1991 Chevy Caprice has a mild miss fire and stall at low rpm: This is my latest update: I checked and cleaned the EGR,PCV,IAC valve, M.A.P sensor and Throttle body(bore/butterfly). with carb cleaner....


Do you have the idle speed turned up to keep it from dying? Because it is high. Check engine light on? Have you checked for vacuum leaks at the gasket under the throttle body? How does the car run under acceleration? You might have a worn distributor shaft.

Jun 22, 2010 | 1991 Chevrolet Caprice

1 Answer

Engine won't idle. when it goes to idle motor


Throttle position sensor, check this out. Also try cleaning the throttle body with throttle body cleaner may be all it needs'

Feb 13, 2010 | Mitsubishi Diamante Cars & Trucks

1 Answer

Engine speed hunts on idle. Auto trans slow shift.


The fast idle valve is inside the throttle body. Sometimes it backs out and needs turned back in (it's threaded). This will cause the loping idle.

Get transmission filter changed with new fluid. Honda does not recommend transmission flushing.

Sep 17, 2009 | 1988 Honda Accord 4 Door

1 Answer

88 dodge dakota has rough idle and stalls at slow down.


Change/thoroughly clean the idle control solenoid. It may be sticking and causing rough idling.
Cleaning it is unlikely to be more than a short-term solution.

Jan 07, 2009 | 1988 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...