Question about 2004 Infiniti G35 Sport Coupe

2 Answers

Hi, my 2004 G35 infinity has noisy VVT in left bank, I pulled out the cover and removed the VVT inner unit attached to camshaft without removing sprocket by undoing hex nuts using allen key. I bought a new one from Nissan, it comes the whole unit including cam sprocket, as a whole unit. 1.Is it ok to dismantle the new VVT inner unit from where it attached to camshaft/sprocket and install in to existing inner part. Will this cause any problems

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 869 Answers

Well ur infiniti should do just fine. however if any problem crops up, get it checked by a dealer.

Posted on Mar 22, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

Assuming you get the timing correct before you start it, you wont bend any valves. Be sure that you have the proper timing set and turn the engine over by hand a few times to make sure it doesn't jump timing or bind up at all.

Posted on Mar 15, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine light code po340 transmission slips


P0340 Infiniti - Camshaft Position Sensor Circuit Bank 1

Aug 09, 2014 | 2004 Infiniti G35 Sport Coupe

2 Answers

How do i replace the camshaft position sensor on a 2004 infiniti i35


hi, i have infinity fx 35 2003 it light on the service engine camshaft position sensor bank 1 , i replaced the bank 1 after 3 hour it light on again service engine + VDC off and slip i put the scanner it told me camshaft position sensor bank 1 again what can i do ?

Jul 24, 2010 | 2004 Infiniti I35

1 Answer

Jaguar s-type pulled code p1380 now you press gas and the car dosen't want to go


P0066 = air assisted fuel injection (AAI) control circuit malfunction.
P1380 = VVT Solenoid circuit malfunction bank 1
P1385 = VVT Solenoid circuit malfunction bank 2
P0353 = IGNITION SIGNAL COIL C FAULT.
P1380 Variable cam timing solenoid A malfunction. Bank 1 cam solenoid located underneath intake manifold. The bank 1 solenoid is under the passenger side valve cover on the V8. On the V6 it's under the valve cover as well but the intake needs to be removed.
Thanks. you can rate this solution and show your appreciation.

May 21, 2010 | 2004 Jaguar S Type

1 Answer

How to chage ur inner tie rod on my g35 sedan?


you need to remove outer tierod first then remove plastic cover on inner tie rod u need special tool for it check autoparts to see if u can rent it from them

Apr 05, 2010 | 2005 Infiniti G35

3 Answers

Need to remove headlight 2003 infinity g35 sedan


yes ballast is on the bottom of the headlight capsule. remove and note 4 torx heads

Nov 17, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

2006 Infinity G35 - where is the cabin filter?


    1. Remove glove box assembly. Remove filter cover, and then remove in-cabin microfilter.Take out in-cabin microfilter from blower unit. Replace with new one and reinstall on blower unit. Reinstall instrument lower passenger panel.
































































Jun 18, 2009 | 2005 Infiniti G35

1 Answer

Fuse


there is a third fuse box to the left of the battery. you have to remove the big cover over the battery and the cover that is up by the windshield.

May 15, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

Replace the tail light bulbs in 2004 infiniti g 35 coup


tail light bulbs are replaced by removing the tail light housings. The housings are accessed by removing the nuts, the nuts are secured behind the inner trunk liner inside the trunk. Remove fasteners holding liner in place, remove 3 nuts for each housing(i believe it's 3 nuts if my memory serves me right), remove housing and replace bulbs

Jan 13, 2009 | 2004 Infiniti G35 Sport Coupe

Not finding what you are looking for?
Cars & Trucks Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...