Question about 2004 Chrysler Sebring

3 Answers

Spark Plugs my 2004 Sebring hesitate when accelerating and I think it might be the Plugs and wires. But where are they?

Posted by on

  • 1 more comment 
  • revmarbarr Aug 01, 2008

    Perfect. Thanks

  • Anonymous Mar 17, 2009

    Can not find spark plugs on 2004 sebring

  • lyric2999 May 04, 2009

    my 2004 Sebring hesitate when accelerating



3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 594 Answers

Your spark plugs should be in either one of 2 places.
1 while you are stadning in front of the car look down there should be some what looks like black caps with thick wires coming from them. in this position you plugs will be torward the bottom of your engine.
2.look to the right or left of the engine. you should see the same thing black caps with wires comeing out of them. thoses are you plugs. now all you have to do is take one wire off at a time. to do that grasp the lower part of the wire shoudl be the black cap do not pull on the wire it's self you might break the wire. from there you should be able to see the top of the plug.

Posted on Aug 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To get a engine check code turn the ignition key over 3 times > start at normal position turn key forward like your turning power on only not to the point of starting the vehicle. then turn it back to start position and repeat 3 times a code will pop up were the odometer is and u can call autozone or advanced auto parts for the breakdown

Posted on May 06, 2009


I dont know

Posted on Aug 02, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

What kind of sensors are on a 2004 sebring 2.4l 4 cylinder engine

have the codes checked if you haven't as it can store a code without check engine light being on. You may have a headgasket seeping .

Apr 25, 2014 | 2004 Chrysler Sebring

1 Answer

My 2004 dodge Durango hesitates and bucks when I accelerate or go up a small hill. Can you give me some solution?

Get your codes scanned at an auto store. Have you changed the air filter, spark plugs, spark plug wires, checked your transmission fluid for starters?

Oct 23, 2013 | 2004 Dodge Durango

1 Answer

Changed the plugs in a 2.7l sebring (2004) and now getting the check engine light with error code p0300. Engine idle at start up also continues to accelerate.

There is something wrong with one of the spark plug or you did not put all the cables on the plugs to the end. Or one of cables or ignition coil(s) is damaged. P 0300 = missfire detected

best regards

Oct 02, 2010 | 2004 Chrysler Sebring

1 Answer

How do you get to back spark plugs

You'll need to remove the intake plenum. From there you can access the plugs and wires.

May 26, 2009 | 2004 Chrysler Sebring

2 Answers

Car hesitation

sounds like the coil pack is failing or you could just have water in your fuel.... buy a couple bottles of gas line antifreeze (it sucks up water) and add them to your tank when you fill up.... if that doesn't fix it it is likely the coil pack

Apr 16, 2009 | 2004 Chrysler Sebring

1 Answer

2004 dodge caravan 2.4 Hesitates during Acceleration and at idele

You should definitely replace the fuel filter though this probably won't fix your hesitation. It wouldn't hurt to replace the spark plugs this is usually the culprit on these engine. I have the same engine in a '99 caravan and found the for some reason the spark plugs on cylinder 3 and 4 loosen up after one year and cause a misfire between 45 and 50 mph under load (when mildly accelerating).

Jan 06, 2009 | 2004 Dodge Caravan

2 Answers

My van seems to be having random multiple misfires

First,investigate the warranty,as there is no need for you to be spending money out of your pocket if the warranty covers such items.As far as the misfires,they can be caused by items a little more in depth,although the spark plugs are the first items to check and replace.The spark plug wires can also cause misfires,as well as coil or coils,and injectors being dirty and partially plugged up.If your engine utilizes spark plug wires,replace them,as they will leak voltage when old,and cause misfires.Anything beyond that will require more diagnostics.Every diagnostic trouble code (DTC) has a diagnostic route as prescribed by the manufacturer.These diagnostic routes are available through pay sources such as All Data online.If the simple things like plugs and wires doesnt fix the problem,then diagnostics are in order.Good luck.

Aug 10, 2008 | 2004 Dodge Caravan

1 Answer

Car hesitation

had a problem with a grand prix like that once, was the fuel filter, and injectors, all needed replaced, and it only had 89,000 miles.
Would check fuel filter first. Is it possible you got some bad gas??

Jul 05, 2008 | 2004 Chrysler Sebring

Not finding what you are looking for?
2004 Chrysler Sebring Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides