Question about 1984 Chrysler Fifth Avenue

2 Answers

No power to the dist. No inside lights dome, or door

Posted by on

  • 3 more comments 
  • slr_cars Mar 15, 2011

    I will check all the wires with a test light. I hope I can find it. I will let ya know.
    Thanks Steve

  • slr_cars Mar 22, 2011

    I haven't had time to check it out yet. I will try to get to it this weekend. I will let you know how it goes. Thanks much Steve

  • slr_cars Mar 26, 2011

    I checked all links. They are all good. There is a power box on the air cleaner. Could it be that? If it is to much it fix it, I can put points dist in it. Maybe? Thanks Steve

  • slr_cars Mar 31, 2011

    I have a 84 5th ave it sat all winter. I jumped started it. Ran for awile,alt started to smoke. Then quit runnin. No power to the dist. I checked all the fuseable links there all good. Thats what the other mechanic told me to do. Can you please help me out? Thanks Steve

  • slr_cars Apr 04, 2011

    Sorry no fuse box under the hood. just fuseable links,and there all good. There is a computer bolted on to the air breather. Could it be that? Thanks Steve

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,427 Answers

Sounds like you blew the main power fuse, Its located in the fusebox under the hood, look for an 80amp to 100amp fuse could be less depending on the vehicle, Its different from the regular ones as its bigger and bolted in place, replace this fuse, While in there look for other blown fuses as well. the fuse box is under the hood, there is a diagram on the box, just incase here it is..

no power to the dist. No inside lights dome, or - darklord1_1.jpg

Posted on Mar 31, 2011

  • Rishi Roshan Ali Apr 04, 2011

    well it could be the cars cpu, but lets look at another possibility first., Tne disttributor gets power from a coil, check to see if this coil is getting power and if its pushing power. Trace the wire from the distributor to the coil.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,400 Answers

Check for a burned "fusible link". It's wire coming from battery, thicker than a normal standard gauge wire. (sometimes they have a bulge on middle of cable) replace with 30amp inline fuse holder.

Posted on Mar 15, 2011

  • Mical Caterina
    Mical Caterina Mar 15, 2011

    Had many older chrysler products and that's common issue

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

SOURCE: 1996 Mercury Sable LS. Problem: Dome light and

have you checked to make sure the dimmer switch isn't turned all the way up? if the dimmer is turned all the way up it will keep the lights inside the car on. check the dimmer switch

Posted on Feb 21, 2009

  • 22 Answers

SOURCE: dome light

CHECK THE GROUND CIRCUIT.

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't the dome light manually shut off in my 2004 land rover discovery


most dome lights are controlled or actuated by a ground supply switch rather than a power supply switch therefore the problem can be in the switch at the door jamb or the latch mechanism inside the door or perhaps a bare wire in between the light and the door contacting ground.

Feb 15, 2015 | 2004 Land Rover Discovery

1 Answer

How can i make my interior overhead lights to turn off


These are activated by little push in switches located on the door frame. When you close the door, it pushed the pin switch in and disconnects the power from the inside lights. You should also check the light switch on the dash. There is a setting on the headlight switch usually that allows you to turn on the inside dome lights by that switch. It may be in that position and will keep your inside lights on until the switch is returned back to the normal position.

Sep 01, 2014 | Mitsubishi Montero Sport Cars & Trucks

2 Answers

Doomlight stays on or will not turn on when door opens


You have a dome light/door ajar switch that is defective, the switch is a tiny micro switch attached to the door latch assembly inside the door, to replace it requires the door panel be removed.

Feb 19, 2012 | 2003 Jeep Grand Cherokee

1 Answer

Have a 04 super cab ranger tremor and when i turn the dome light and the door ajar light comes on how can i fix that


turn off the dome light.


the door opens, it turns on the dome light, so the wire that goes from the door switch gets powered up and makes your dome light come on. if your door is closed, and you turn on the dome light, the same wire gets power and is actually sending power to your light bulb on the dash.
just ignore it , or get a diode and put it on the correct wire, and it wont allow the electricity to flow back towards the light bulb when you put the dome light on.

Jul 31, 2010 | 2004 Ford Ranger

2 Answers

1999 Chev Silverado Door Light Switch


the actuator for the dome light is actually located inside the lock mechanism. Have you checked to make sure the dome light override button is in the out position?

Jul 17, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

1959 pontiac 2 door bonneville. how do you hook up the wiring for the dome light? two wires coming down from the light. driver side door switch has two terminals. pass side door switch has one terminal.???


Negative from the dome light to one terminal on the door jab,and the other terminal,hook to,and run to the other door jam on passengers side.The hot wire from the dome light goes to the hot side on the fuse box.A additional light switch can be installed,to turn the dome light on from inside the car,by running a ground to the switch,and from the switch to the ground side of the dome light.

Nov 13, 2009 | 1978 Pontiac Bonneville

1 Answer

Same problem: door ajar light was on, dome light


Check fuse 23, 27 and 33 inside the vehicle. Chances are you blew a fuse when the dome lamp shorted. The modules should be okay.

Oct 18, 2009 | 1999 Ford Taurus

1 Answer

Multiple electrical problems


first of all power windows usually are on a circuit breaker... did you check all fuses under the hood in the power dist center.. power door locks are not on the same circuit as the windows first i would pull up the window switch to see if you have power on it.. let me know

Jun 18, 2009 | 1997 Buick Park Avenue

1 Answer

Sable 1996 dome and inside lights do not go out with doors closed


lol....dont feel bad.....it happens to ALL of us

Feb 21, 2009 | 1996 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...